edited p005-009 - Our Site is Under Construction

Recommendations

Info

www.northamericanmaintenancesupply.comANorth American Accredited Maintenance Lock Supply LLC.CYLINDER TOOL FOR KWIKSET 400 SERIESSECRET GATE LATCH• Quickly removes cylinder from lock• Hidden button in bottom of case retracts latch• Removes Cylinder Retaining Clipfor the informed• Handle is following tool with master wafer unload feature• Exposed dummy knob frustrates theunwelcome intruderMJKCT-251 00• Latch is reversible• Supplied with strike plate, mounting screws anddummy knobApproximate case size is: 2" x 2 1/2"Aluminum BodySPINDLE SETTING TOOL FOR KWIKSETEasily replace broken spindles in Kwikset 400 series locks with this tool. SimplyP/NFinishPricedrive the old spindle out of the lock with a pin punch, insert the new spindle and stakeMJS200-SPA Plated Chrome 31.10with the tap of a hammer. Fast, easy and profitable.MJS200-SPB Plated Brass 33.50MJKSP-458 50REPAIR SCREWS FOR HINGES/STRIKES ON STEEL DOORSUse these special machine screws when replacing a stripped outhinge or strike screw mounted in a steel door or frame. Thescrew has a standard #12 under cut phillips flat head but theKTT-4 KWIK TORQUE TOOL FOR OPENING KWIKSET ® body is a special 14-24 thread, larger than the standard 12-24.SMART KEY TM A tek point allows you to drive in the screw with a screw gun. TwoLOCKSfinishes are offered to match existing hardware and screws areavailable in packs of 100.Quickly open the Smart KeyTM lock with the useof our KT-4 Kwik Torque Tool. Just insert the toolP/NFinishPricein the keyway and turn. The lock will be opened inMJLS-30-100 Zinc Plated 69.00seconds! The only damage to the lock is the lossMJLS-31-100 Black Zinc Plated 69.00of the Smart Change Feature. In most cases, theoriginal keys will still work.REPAIR SCREWS FOR WOOD DOORS AND FRAMESUse these wood screws when replacing a stripped out hinge or strikeMJKTT-4screw mounted in a wood door or frame. The screw has a standard #12179 00flat head but the body is a special #14 size, larger than the standard #12screw. Overall length of the screw is 1-3/8”. Three finishes are offeredto match existing hardware and screws are available in packs of 100.P/NFinishPriceMJLS-35-100 Yellow Zinc Plated 69.00SAFE DEPOSIT LOCK NOSE PULLERMJLS-36-100 Zinc Plated 69.00CLASSIC MAGNUM PULLERMJLS-37-100 Black Zinc Plated 69.00SPECIAL MACHINE SCREWS FOR LATCHES AND FACEPLATES ON STEEL DOORS AND FRAMESUse these special machine screws when replacing a stripped out latchor face plate screw mounted in a steel door or frame. The screw hasMachined from a solid hexa standard #8 phillips flat head but the body has a 10-32 thread. Thisshaped bar of 15/8" wide steelallows you to tap the stripped hole to 10-32 and make a quick repair.that 10 1/2" long. A ball bearingrace makes pulling smoothmatch existing hardware. Available in packs of 100.Overall length is 1/2 inch and screws are available in two finishes toand easy. Storage for extrascrews used by the puller isprovided under a threaded cap.MJCMP-475Three adapters are also includedto help with different431 00 P/NFinishPriceMJLS-39-100 Zinc Plated 53.00applications.MJLS-40-100 Black Zinc Plated 53.00400
North Accredited American Lock Maintenance Supply Supply LLC.www.northamericanmaintenancesupply.comCCONTINUOUS HINGESUnlike conventional butt hinges which have traditionally caused door and frame failure, Markar Products’ Continuous Hinges unite the door and frame into anintegral unit, transmitting these severe shock loads directly into the frame. Latches continue to work, traffic flows, doors safely operate and costly maintenance isprevented.Surface applied and don’t require hinge cutout or reinforcements in doors or frames. All models are symmetrical, so there is no need to specify handing.Ideal for automatic operated entrances. Individually packed in cartons with screws and fasteners.FULL SURFACE - 1/8" OFFSETCode Length (ft.)Material FinishPriceMRFS101-7-AL 7 Aluminum Aluminum 388.00MRFS101-7-BRZ 7 Aluminum Duranodic Bronze 494.00MRFS101-8-AL 8 Aluminum Aluminum 460.00MRFS101-8-BRZ 8 Aluminum Duranodic Bronze 569.00MRFS201-7-P 7 Carbon Steel Pwdr Coat Prime 330.00MRFS301-7-SS 7 Stainless Stl Stainless Steel 522.00FULL SURFACE - FLUSHCode Length (ft.)Material FinishPriceMRFS102-7-AL 7 Aluminum Aluminum 388.00MRFS102-7-BRZ 7 Aluminum Duranodic Bronze 494.00MRFS102-8-AL 8 Aluminum Aluminum 460.00MRFS102-8-BRZ 8 Aluminum Duranodic Bronze 569.00HINGE/GUARDMRHG305-7-SS7 Ft. Stainless Steel 502.00MRFS202-7-P 7 Carbon Steel Pwdr Coat Prime 330.00MRFS302-7-SS 7 Stainless St Stainless Steel 522.00EDGE MOUNTMRFM100-7-AL 7 Aluminum Aluminum 327.00MRFM100-8-AL 8 Aluminum Aluminum 379.00MRFM100-8-BRZ 8 Aluminum Duranodic Bronze 445.00MRFM200-7-P 7 Carbon Steel Pwdr Coat Prime 257.00MRFM300-7-SS 7 Stainless Stl Stainless Steel 385.00HALF SURFACEMRHS103-7-AL 7 Aluminum Aluminum 379.00MRHS103-7-BRZ 7 Aluminum Duranodic Bronze 454.00MRHS203-7-P 7 Carbon Steel Pwdr Coat Prime 297.00MRHS303-7-SS 7 Stainless Stl Stainless Steel 466.001/4-20 x 1 3/4" Sleeve BoltMRMP-23 Steel, zinc plate 2.35 eaREINFORCING PIVOTProvides a cost-effective reinforcement for butt-hingesystems and ensures longer door operating life. Addssupport at the top of the door where most of the stressis concentrated. Easily installed by maintenance personnel,and comes with necessary fasteners. Adapts toany door and acceptable for use on fire doors.Features--• Made of 3/16" cadmium plated steel.• Oilite bronze bearing• Hardened steel pivot pinCodeHandlingPriceMRB1923-RH Left 61.00MRB1923-LH Right 61.00Figure 13Illustration shows what eventually happens toconventional butt hinge under heavy use.1.800.604.1922401
Page 1 and 2:
Security Locking Door Hardware & Ac
Page 3 and 4:
North American Maintenance Supply L
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
North Accredited American Lock Main
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
08 AR131 2 3/8" 3/4" 1" x 2 1/4" 11
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
1.800.604.1922
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
kçêíÜ=^ãÉêáÅ~å=j~áåíÉ
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
INTERNATIONALNorth American Mainten
Page 259 and 260:
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
Page 269:
Page 272 and 273:
BNorth American Maintenance Supply
Page 274 and 275:
Page 276 and 277:
Page 278 and 279:
Page 280 and 281:
Bwww.northamericanmaintenancesupply
Page 282 and 283:
Page 284 and 285:
Page 286 and 287:
Page 288 and 289:
Page 290 and 291:
www.northamericanmaintenancesupply.
Page 292 and 293:
Page 294 and 295:
CNorth American Maintenance Supply
Page 296 and 297:
ANorth American Maintenance Supply
Page 298 and 299:
Page 300 and 301:
Page 302 and 303:
Page 304 and 305:
Page 306 and 307:
Page 308 and 309:
Cwww.northamericanmaintenancesupply
Page 310 and 311:
Page 312 and 313:
Page 314 and 315:
Page 316 and 317:
Page 318 and 319:
Page 320 and 321:
Page 322 and 323:
Page 324 and 325:
Page 326 and 327:
Page 328 and 329:
Cbywww.northamericanmaintenancesupp
Page 330 and 331:
Page 332 and 333:
Page 334 and 335:
Page 336 and 337:
Page 338 and 339:
Page 340 and 341:
Page 342 and 343:
Page 344 and 345:
Page 346 and 347:
Page 348 and 349: Cwww.northamericanmaintenancesupply
Page 352 and 353: www.northamericanmaintenancesupply.
Page 414 and 415: 416North American Maintenance Suppl
Page 416 and 417: 418North American Maintenance Suppl
Page 448 and 449:
Page 450 and 451:
Page 452 and 453:
Page 454 and 455:
Page 456 and 457:
Page 458 and 459:
Page 460 and 461:
Page 462 and 463:
Page 464 and 465:
Page 466 and 467:
Page 468 and 469:
Page 470 and 471:
Page 472 and 473:
Page 474 and 475:
Page 476 and 477:
Page 478 and 479:
Page 480 and 481:
Page 482 and 483:
Page 484 and 485:
Page 486 and 487:
CNorth American Maintenance Supply
Page 488 and 489:
Page 490 and 491:
Page 492 and 493:
Page 494 and 495:
Page 496 and 497:
Page 498 and 499:
®www.northamericanmaintenancesuppl
Page 500 and 501:
Page 502 and 503:
Page 504 and 505:
Page 506 and 507:
Page 508 and 509:
Page 510 and 511:
KaliforniaKeyChains.com®www.northa
Page 512 and 513:
Page 514 and 515:
Page 516 and 517:
Page 518 and 519:
Page 520 and 521:
Page 522 and 523:
Page 524 and 525:
Page 526 and 527:
Page 528 and 529:
Page 530 and 531:
Page 532 and 533:
Page 534 and 535:
Page 536 and 537:
Page 538 and 539:
Page 540 and 541:
Page 542 and 543:
Page 544 and 545:
Page 546 and 547:
Page 548 and 549:
Page 550 and 551:
Page 552 and 553:
Page 554 and 555:
Page 556 and 557:
Page 558 and 559:
Page 560 and 561:
Page 562 and 563:
Page 564 and 565:
Page 566 and 567:
Page 568 and 569:
Page 570 and 571:
Page 572 and 573:
Page 574 and 575:
Page 576 and 577:
Page 578 and 579:
CBwww.northamericanmaintenancesuppl
Page 580 and 581:
Page 582 and 583:
Page 584 and 585:
BCwww.northamericanmaintenancesuppl
Page 586 and 587:
Page 588 and 589:
Page 590 and 591:
Page 592 and 593:
Page 594 and 595:
Page 596 and 597:
Page 598 and 599:
Page 600 and 601:
Page 602 and 603:
Page 604 and 605:
Page 606 and 607:
Page 608 and 609:
Page 610 and 611:
Page 612 and 613:
Page 614 and 615:
Page 616 and 617:
Page 618 and 619:
Page 620 and 621:
Page 622 and 623:
Page 624 and 625:
Page 626 and 627:
Page 628 and 629:
Page 630 and 631:
Page 632 and 633:
Page 634 and 635:
Page 636 and 637:
Page 638 and 639:
Page 640 and 641:
Page 642 and 643:
Page 644 and 645:
Page 646 and 647:
Page 648 and 649:
Page 650 and 651:
Page 652 and 653:
Page 654 and 655:
Page 656 and 657:
Page 658 and 659:
Page 660 and 661:
Page 662 and 663:
Page 664 and 665:
Page 666 and 667:
Page 668 and 669:
Page 670 and 671:
Page 672 and 673:
Page 674 and 675:
Page 677 and 678:
NOTES
Page 679 and 680:
TERMS AND CONDITIONSMINIMUM ORDER:F
show all

edited p005-009 - Our Site is Under Construction

Create successful ePaper yourself

Delete template?

Save as template?