installation instructions 2-panel vinyl sliding doors - Superior Windows
installation instructions 2-panel vinyl sliding doors - Superior Windows
installation instructions 2-panel vinyl sliding doors - Superior Windows
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
FIXED PANEL REMOVALRemove the head and sill cap from the center track. These areused to block the fixed <strong>panel</strong> in position and can be removed bycarefully prying up and out (DIAGRAM 2). Beginning at the top ofthe fixed <strong>panel</strong> and working down, pry the interlock clip off of the<strong>panel</strong> (DIAGRAM 3). Care must be taken to avoid scratching orgouging the <strong>vinyl</strong>. Remove the fixed <strong>panel</strong>. Snap out the sill riserthat is located below the fixed <strong>panel</strong> (DIAGRAM 4).Pry upsill cap.2REINSTALLATION OF DOOR PANELSReturn to <strong>Superior</strong>’s <strong>installation</strong> <strong>instructions</strong> at the fixed <strong>panel</strong> <strong>installation</strong> step.PryInterlock ClipSeries 9800 / 9900Interlock ClipRiserSeries 9100 / 9901Pry34INSTRP-1107 ©2010 <strong>Superior</strong> <strong>Windows</strong> & Doors superior-windows.com