Material Handling Catalog - Casters

174model DCR-H-HP-DCSECURE GRIPDVD or VIDEOAVAILABLEDCR-SCALEmodelDCR-880-MmodelDCR-880-HEconomical Drum TransportersUnique portable unit designed to lift and transport plastic, steel, and fiber drums with atop lip. Steel jaw securely grips the top lip of the drum. Available with either a manualmechanical ratchet or a foot pump hydraulic lift mechanism. Straddle legs rotate foraccess to drums on pallets. Unit rolls on (4) 8" x 2" glass-filled casters. The push handlefolds down for easy access to ratchet and foot pump. All welded steel construction.Powder coated with a safety yellow finish. Optional scale weighs drums to an accuracyof +/-0.5 lbs. Optional scale includes (6) D cell batteries and an AC adaptor.MODELNUMBERJAW SERVICERANGEUNIFORMCAPACITYNET WT.(LBS.)LIST PRICEEACHDESCRIPTIONDCR-880-M HAND RATCHET 31" to 46½" 880 170 $819.00DCR-880-H FOOT PUMP 31" to 48½" 1,500 190 934.00DCR-880-H-HP FOOT PUMP 31" to 72" 880 240 1,022.00DCR-880-H-DC DC POWERED 31" to 48½" 1,500 200 $2,568.00DCR-880-H-HP-DC DC POWERED 27" to 74" 880 250 2,656.00DCR-SCALE OPTIONAL WEIGHT SCALE 1,500 70 $1,342.00DC-25/FC-70Drum ControllerTransport 55-gallon steel drums from work area to work area with the heavy-duty DrumController. This unit lifts drums off the ground 2¼" with minimal effort (all this is donewithout straps or ratchet). To lift drums, center the arms around the drum below theupper rib then pull the handle down. Inside straddle width is 25". Unit rolls smoothlyon 8" x 2" phenolic casters. Steel construction.MODELNUMBEROVERALL SIZE(W x D x H)LIFTHEIGHTUNIFORMCAPACITYNET WT.(POUNDS)LIST PRICEEACHDC-550 33" x 33¾" x 63" 2¼" 550 140 $516.00DC-25/FC-70Lo-Profile Drum Caddies with Bung Wrench HandleReduce injuries caused by manually lifting and moving drums. Transport (1) 55 or 30-gallon drum or (2) 5-gallon pails with the Lo-Profile Drum Caddy. To use: align unitin front of drum, remove handle, and grip drum with the handle. Tip drum up whileguiding the caddy base under the drum. Re-attach handle and transport drum to desiredlocation. Unit rolls easily on two 6" x 2" rigid wheels and one 3" x 1" swivel caster. Theremovable handle doubles as a bung nut wrench and seal remover. Cradle height is ½".Inside cradle diameter is 23½". Steel construction. Yellow painted finish.DRUM, CYLINDER, PAIL EQUIPMENTPhone (800) 348-0868NewNewMODELNUMBERSTRADDLE(W x D)UNIFORMCAPACITYNET WT.(POUNDS)LIST PRICEEACHWHEEL TYPELO-DC-MR 26" x 16" 1,000 MOLD-ON-RUBBER 38 $109.00LO-DC-CI 26" x 16" 1,200 STEEL 40 123.00LO-DC-PU 26" x 16" 1,200 POLY-ON-STEEL 38 109.00LO-DC-PH 26" x 16" 1,200 PHENOLIC 38 132.00DC-25/FC-70Manual Low Profile Hydraulic Drum TruckIdeal for loading and unloading 55 gallon steel, plastic and fiber drums when no forktruck is available. This device allows a single operator to engage elevated drums as wellas to transport and position drums. A spring-loaded clamp securely grasps the rim ofa drum. To elevate the rim clamp up to 5 feet, the truck incorporates a foot-operatedhydraulic pump. Unit rolls smoothly on 2 rigid 2½" x 1½" front wheels and 3⅛" x 1¼"poly rear wheels. Truck is easy to assemble/disassemble for storage.MODELNUMBEROVERALL SIZE(W x D x H)LOWEREDHEIGHTRAISEDHEIGHTUNIFORMCAPACITYNET WT.(POUNDS)LIST PRICEEACHLPDT 34" x 37" x 60" 32 7 /8" 64 9 /16" 600 155 $605.00DC-25/FC-70Pallet Straddling Drum TruckA single operator can engage, lift and transport drums stored either on the center ofpallets or the corner of containment skids. Works with 30 and 55 gallon steel, plastic andfiber drums. To engage a drum, the truck uses a rim clamp that securely grasps the toplip of the drum. Two rigid and two swivel polyurethane wheels provide a high degree ofmaneuverability; each swivel wheel is protected by guards and is equipped with brakes.MODELNUMBEROVERALL SIZE(W x D x H)LOWEREDHEIGHTRAISEDHEIGHTUNIFORMCAPACITYNET WT.(POUNDS)LIST PRICEEACHPSDT 38 9 /16" x 32" x 47" 35¾" 46 3 /8" 550 110 $521.00DC-25/FC-70www.vestil.com