71Die TablesDesigned to reduce back injuries and cumulative trauma disorders. Lifts heavy equipment to ergonomicworking height. Manually operated hydraulic foot pump and lift cylinder. Handle height is 41". Allwelded steel construction will provide years of service and hard work. Small frame size allows unit toaccess hard-to-reach locations. Two rigid and two swivel casters standard with floor lock.MODELNUMBERPLATFORMSIZE (W x L)UNIFORMCAPACITYLOWEREDHEIGHTRAISEDHEIGHTNET WT.(POUNDS)LIST PRICEEACHDIE-2430-36 24" x 30" 2,000 24" 36" 302 $561.00DIE-2430-48 24" x 30" 2,000 30" 48" 322 580.00DIE-2430-60 24" x 30" 2,000 36" 60" 345 619.00Lift & Tilt Carts with Sequence SelectModels CART-500-LT, CART-1000-LT, and CART-1000-LT-PSS have a uniquedesign which allows the user to RAISE and TILT materials to an ergonomic positionfor better posture and operator comfort. The manual hydraulic foot pump controlsthe platform lift, lower, and tilt. A manual selector valve is used to control the lift/lower sequence independently from the tilt sequence. The platform includes a 6½"high retaining lip on model CART-500-LT and 7" high on CART-1000-LT series.Cart is portable with two rigid and two swivel 5" poly casters.Models CART-400-LT and CART-600-LT are elevated by means of a foot actuatedhydraulic cylinder. As the table is raised, it simultaneously tilts to an angle of 45°at full elevation. Built-in retaining lip keeps containers in place. Units roll on 5"polyurethane casters, 2 rigid and 2 swivel with brakes.MODELNUMBERPLATFORMSIZE (W x L)UNIFORMCAPACITYMAXIMUMTILT*SERVICERANGENET WT.(POUNDS)DC-20/FC-70LIST PRICEEACHSTEEL CONSTRUCTIONCART-500-LT 21½" x 40" 500 35° 17 5 /8" to 34¼" 320 $2,125.00CART-400-LT 19½" x 30" 400 45° 13" to 31" 200 $675.00CART-600-LT 24" x 36" 600 45° 14" to 35" 300 744.00CART-1000-LT 22" x 33 5 /8" 1,000 40° 17½" to 35" 330 $992.00PARTIALLY STAINLESS STEEL CONSTRUCTIONCART-1000-LT-PSS 22" x 33 5 /8" 1,000 40° 17½" to 35" 330 $1,566.00*SERVICE RANGE FIGURED WITH PLATFORM LEVELAir Hydraulic CartsCART-1000-LTNewDC-25/FC-70Features two speed foot pump and hand held reciprocating air/oil power to raise the platform.Utilize the two speed foot pump for minor height adjustments and the factory air/oil power foreffortless lifting of up to 2,000 uniform pounds.Partially stainless steel carts are available. The platform, frame, handle, caster rigs, and hardware areall stainless steel. Pump assembly, hydraulic cylinder, and scissor legs are zinc plated. Wheels arepoly-on-poly.NewmodelAIR-800-DDVD or VIDEOAVAILABLECART-500-LTCART-400-LTCART-600-LTMODELNUMBERPLATFORMSIZE (W x L)UNIFORMCAPACITYSERVICERANGECASTERSIZENET WT.(POUNDS)LIST PRICEEACHSTEEL CONSTRUCTIONAIR-800-D 20" x 35½" 800 13¾" to 51" 5" x 1½" 285 $765.00AIR-1000 19¾" x 32½" 1,000 15¾" to 35½" 5" x 1½" 190 640.00AIR-1000-LD 31½" x 63" 1,000 15½" to 35½" 5" x 1½" 340 1,085.00AIR-1500-D 24" x 47¼" 1,500 19½" x 67" 6" x 2" 550 1,220.00AIR-1750 20" x 39½" 1,750 14¼" to 39½" 6" x 2" 265 768.00AIR-2000 24" x 47¼" 2,000 15" to 39½" 6" x 2" 385 858.00PARTIALLY STAINLESS STEEL CONSTRUCTIONAIR-800-D-PSS 20" x 35½" 800 13¾" to 51" 5" x 1½" 285 $1,379.00AIR-1000-PSS 19¾" x 32½" 1,000 15¾" to 35½" 5" x 1½" 190 1,157.00AIR-1000-LD-PSS 31½" x 63" 1,000 15½" to 35½" 5" x 1½" 340 1,852.00AIR-1500-D-PSS 24" x 47¼" 1,500 19½" x 67" 6" x 2" 550 2,028.00AIR-2000-PSS 24" x 47¼" 2,000 15" to 39½" 6" x 2" 385 1,758.00Pneumatic Scissor Lift TableDC-20/FC-70This unit works great in many environmentally sensitive applications. Table can be used anywhereutilizing only shop air. Air actuator valve included. No electrical power or hydraulic oil required.MODEL PLATFORM UNIFORM CAPACITY SERVICE NET WT. LIST PRICENUMBER SIZE (W x L)(POUNDS)RANGE (POUNDS) EACHAT-10 19½" x 39½" 200 13¾" to 31¼" 205 $864.00DC-20/FC-70modelAIR-1750model AT-10www.vestil.com Phone (800) 348-0868ERGONOMIC SOLUTIONS
72DC Powered and Manual Scissor CartsDVD or VIDEOAVAILABLEMANUAL TWO-SPEEDFOOT PUMPCustom FinishAvailable12V DC POWERTables provide unparalleled ergonomic support in lifting, palletizing, loading, and unloading applications.Carts are raised or lowered with either a 12V DC powered motor or a manual two-speed foot pump. Unitsroll smoothly with (2) rigid and (2) swivel 4" x 2" phenolic casters with brakes. Push handle is removable.Internal DC powered electric motor and 12V battery is included on DC units. Electric motoris rated at 1600 watts. Built-in battery charger is included (operated on 115V AC power). Pushbuttons to raise and lower lift are located on the power unit. Hand control on coil cord is alsostandard. Key-operated ON/OFF control for better security is built into the power unit. Platform isequipped with perimeter pinch-point guard for OSHA compliance.MODELNUMBERPLATFORMSIZE (W x L)SERVICERANGEUNIFORMCAPACITYLIFT SPEED OR# OF PUMPSNET WT.(POUNDS)LIST PRICEEACH12V DC POWERCART-23-10-DC 24" x 36" 11¼" to 32" 1,000 14 sec. 410 $1,664.00CART-23-15-DC 24" x 36" 11¼" to 32" 1,500 16 sec. 450 1,769.00CART-24-10-DC 24" x 48" 9¼" to 42½" 1,000 15 sec. 460 1,759.00CART-24-15-DC 24" x 48" 9¼" to 42½" 1,500 17 sec. 500 1,859.00TWO-SPEED FOOT PUMPCART-23-10-M 24" x 36" 11¼" to 32" 1,000 54 low - 27 high 380 $1,136.00CART-23-15-M 24" x 36" 11¼" to 32" 1,500 54 low - 27 high 420 1,231.00CART-24-10-M 24" x 48" 9¼" to 42½" 1,000 63 low - 31 high 430 1,241.00CART-24-15-M 24" x 48" 9¼" to 42½" 1,500 63 low - 31 high 470 1,331.00DC Powered Hydraulic Elevating Carts12V DC STANDARDDC-20/FC-70These carts are ideal for quick lifting and ergonomic material handling. Battery-powered units allowoperators to raise and lower platform with the push of a button. Units roll on two rigid and twoswivel polyurethane casters. Includes battery and on-board battery charger.model CART-1000D-DCmodel CART-1000-LD-DCmodel CART-1000-DCMODELNUMBERDESIGNPLATFORMSIZE (W x L)UNIFORMCAPACITYSERVICERANGENET WT.(LBS)LIST PRICEEACHCART-1000D-DC DOUBLE 20½" x 39¾" 1,000 19½" to 63¾" 484 $1,577.00CART-1000-DC SINGLE 20½" x 39¾" 1,000 17½" to 37½" 419 1,498.00CART-1000-WD-DC SINGLE 31½" x 47¼" 1,000 17" to 48" 485 1,775.00CART-1000-LD-DC SINGLE 24½" x 60" 1,000 17½" to 45" 473 2,018.00CART-2000-DC SINGLE 20" x 40" 2,000 15" to 39" 360 2,187.00CART-DS-1000 DOUBLE 20" x 33" 1,000 14" to 42" 370 2,349.00CART-SCTAB-500-DC SINGLE 20" x 33" 500 13" to 35" 366 $1,706.00CART-SCTAB-750D-DC DOUBLE 20" x 40" 750 14" to 42" 387 1,992.00CART-SCTAB-1000-DC SINGLE 20" x 40" 1,000 15" to 39" 402 1,920.00CART-SCTAB-2000-DC SINGLE 42" x 42" 2,000 15" to 39" 514 2,474.00Traction Drive Electric Hydraulic Elevating CartsDC-20/FC-70model CART-2000-DCmodel CART-DS-1000The Traction Drive Electric Hydraulic Elevating Carts make maneuvering heavy loads virtuallyeffortless. A twist style throttle with reverse facilitates the maneuverability of this cart. The push ofa button will raise and lower the platform. 24V DC system with 115V AC on-board charger andmaintenance free batteries. Standard features include: powered front industrial 6" x 2" drive wheels.24V DC STANDARD, OPTIONS ON PG. 43ERGONOMIC SOLUTIONSCART-DS-1000-CTD24V DC STANDARDDVD or VIDEOAVAILABLENewCART-1000D-DC-CTDMODELNUMBERPLATFORMSIZE (W x L)UNIFORMCAPACITYSERVICERANGENET WT.(POUNDS)LIST PRICEEACHCART-DS-1000-CTD 20" x 33" 1,000 15" to 41" 452 $4,048.00CART-2000-CTD 20" x 40" 2,000 16" to 40" 513 3,945.00BCI BATTERY CHARGE INDICATOR GAUGE 1 $82.00Powered Drive and Powered Lift Hydraulic Scissor CartsMODELNUMBERPLATFORMSIZE (W x L)UNIFORMCAPACITYSERVICERANGESCISSORTYPENET WT.(LBS.)DC-20/FC-70Fully powered carts provide users with motorized, variable-speed travel as well as powered liftingcapability. Carts roll smoothly and quietly on low-friction pneumatic and poly-on-steel wheels.High torque 24V DC drive and lift motors handle heavy-duty jobs. Standard features: easy-tooperatethrottle that adjusts forward and reverse speeds over a range of 0-3.7 mph, deck levelcontrol buttons (raise and lower), emergency reverse function, automatic braking, horn, key switch,integrated battery charger, and battery charge indicator. These carts use two 12V, 35Ah batteries.LIST PRICEEACHCART-1000-DC-CTD 20½" x 40" 1,000 20½" to 40" SINGLE 393 $3,401.00CART-1500-DC-CTD 20½" x 40" 1,500 23" to 66½" SINGLE 507 3,487.00CART-1000D-DC-CTD 20½" x 40" 1,000 20½" to 40" DOUBLE 405 3,409.00CART-1500D-DC-CTD 20½" x 40" 1,500 23" to 66½" DOUBLE 530 3,576.00DC-20/FC-70Phone (800) 348-0868www.vestil.com