Material Handling Catalog - Casters

89Low-Profile Powered CarouselThe Low-Profile Powered Carousel features a heavy-duty steel non-skid tread plate platform 48"in diameter. This unit handles loads up to 4,000 pounds. Model POW-CAR-LP features 300°ramp allowing access for pallet trucks, approach ramp is not necessary. Model POW-CAR iseasily accessible with a fork truck; optional approach ramp is required for pallet truck use. A footcontrol with a variable speed control (8 foot power cord), cushion start/stop, and rugged ¾ HPmotor with belt drive are standard. Units are pre-wired to work on 115V/single phase power.MODELNUMBERMODELNUMBER DIAMETER HEIGHTUNIFORMCAPACITYNET WT.(POUNDS)LIST PRICEEACHR.P.M.PT-100 12" 4½" 100 3-1/2 34 $474.00PT-250 18" 5½" 250 3 56 681.00PT-750 18" 6 3 /8" 750 2 66 859.00FOOT CONTROL, MODEL FC-2, $92.00 LISTOPTIONAL 1 OR 2 R.P.M., model PT-1/2RPM, $51.00 LIST (NOT available on PT-100)COUNTER-CLOCKWISE ROTATION, model PT-CCW, $43.00 LISTMODELNUMBERCAROUSELHEIGHTMODELNUMBER DESCRIPTION R.P.M. HEIGHTHEIGHTRANGEUNIFORMCAPACITYUNIFORM CAPACITY(POUNDS)NET WT.(POUNDS)NET WT.(POUNDS)NET WT.(POUNDS)LIST PRICEEACHDESCRIPTIONR.P.M.POW-CAR-LP 115V AC POWER 1" 4,000 3-12 450 $4,099.00POW-CAR 115V AC POWER 2 3 /8" 4,000 3-12 569 3,360.00SWA-R-4836 PALLET TRUCK APPROACH RAMP 48"W x 36"L x 2¼" 175 $353.00SWA-R-4848 PALLET TRUCK APPROACH RAMP 48"W x 48"L x 2¼" 220 467.00DC-20/FC-60Stand Alone Powered CarouselEasily rotate pallets, skids, and other large objects with these rugged powered carousels. Eachunit includes a 48" diameter round tread plate turntable. Turntable is supported with invertedcasters for use as bearings. Units come with turntable, base, 115V 1 phase power unit, andvariable-speed control (electric/hydraulic unit has fixed speed control). Turntable is operated witha foot control. Uniform capacity is 4,000 lbs. Heavy-duty steel construction.LIST PRICEEACHSTPC-CD CHAIN DRIVEN 3-12 24" 788 $4,021.00STPC-EHD ELECTRIC HYDRAULIC DRIVEN 8 13½" 788 4,245.00Heavy-Duty King Pin CarouselMODELNUMBERSIZE(W x L) HEIGHTUNIFORMCAPACITY(LBS)NET WT.(POUNDS)DC-20/FC-60LIST PRICEEACHCA-KP-3636-4 36" x 36" 2 5 /8" 4,000 221 $1,033.00CA-KP-3636-6 36" x 36" 2¾" 6,000 263 1,127.00CA-KP-4848-4 48" x 48" 2 5 /8" 4,000 367 $1,349.00CA-KP-4848-6 48" x 48" 2¾" 6,000 442 1,408.00CA-KP-6060-4 60" x 60" 2 5 /8" 4,000 554 $1,579.00CA-KP-6060-6 60" x 60" 2¾" 6,000 654 1,682.00Powered Turntables115V 1-PHASE STANDARD115V 1-PHASE STANDARD115V 1-PHASE STD, OPTIONS ON PG. 43All the ergonomic benefits of the standard carousel with a top plate and stabilizing center pin.Unit will handle a wider variety of loads. Features include ¼" tread plate top on 4,000 lbs. and⅜" tread plate top on 6,000 lbs. models. Also includes a heavy-duty maintenance free bearing.The king pin design allows off set loading up to 50% of the capacity on at least 50% of the deck.Standard top plates are square with rounded corners. Contact factory for special sizes.Turntables with Powered Height AdjustmentDC-25/FC-60Keep tedious material handling at your fingertips. Easy, smooth, clockwise rotation for hundreds ofapplications. Rotation speed is non-adjustable. These Powered Turntables are wired to 115V, 1 phase.An on/off selector switch incorporated in a 3 foot cord provides power to the unit. A side skirt toprotect items from getting into the rotating mechanism is standard. Rotation is clockwise.DC-25/UPS/FC-60115V 1-PHASE STD, OPTIONS ON PG. 43These turntables with powered height adjustment allow the operator to raise or lower turntable toan ergonomic height. Each unit has a 360° manual turntable. AC power, 115V, 1 Phase with handcontrol for height adjustment. Height is adjusted with an electric linear-actuatorLIST PRICEEACHDIAMETERTT-18-LA 18" 27" TO 42¾" 750 232 $1,499.00TT-24-LA 24" 27" TO 42¾" 750 267 1,595.00TT-30-LA 30" 27" TO 42¾" 750 295 1,625.00DC-25/FC-60model POW-CARmodel POW-CAR-LPCENTER KING PINLOW PROFILE DESIGNDOES NOT REQUIREAPPROACH RAMP FORPALLET TRUCK USE.model STPC-CDDVD or VIDEOAVAILABLEwww.vestil.com Phone (800) 348-0868PACKAGING EQUIPMENT