pack your own capillaries for hplc and mass spec - Western Analytical

C O M P O N E N T SC O L U M N E N D F I T T I N G SProvide system connections while retaining the silica bedReusable - simply replace the screen after multiple usesFor direct-connection of 360um or 1/32” OD columnsColumn End Fittings retain a silica bed while packing and connect the finishedcolumn to your system. They are reusable, and the filter screen whichretains the silica is easily replaced after multiple uses. The fittings below aremade for direct-connection of either 360µm or 1/32” OD columns. Note thatone endfitting may be modified into the other by exchanging both screenand microferrule, or use the F-385X to adapt 360µm tubing to 1/32” OD.Part Number Description Price360µmM-538M-126F-152360µm OD column End Fitting, with (5) 1µm Titanium screens, 10nLReplacement screens for M-538, 1µm, Titanium, 2-packReplacement microferrule for 360µm OD columns, PEEK$ 178.60$ 53.50$ 6.001/32”M-548M-134F-1121/32” OD column End Fitting, with (5) 1µm Titanium screens, 22nLReplacement screens for M-548, 1µm, Titanium, 2-packReplacement microferrule for 1/32” OD columns, PEEK$ 178.60$ 53.50$ 6.00MiscP-416F-385XReplacement female nut for M-538 and M-548, PEEKTubing Sleeve Adapter, 360um ID x 1/32” OD, PEEK, 10-pack$ 5.35$ 18.00P R E S S U R E S O U R C E A C C E S S O R I E SHigh-pressure tubing and connectionsGauges, valves, and flow control accessoriesConnection of the Nanobaume TM to a pressure supply source requires onlyan adapter and a length of high-pressure tubing. Inserting a gauge intothe fluid stream (using the Gauge Tee) will allow you to monitor the packingpressure. A 3-Way Valve is an easy way to connect or remove the unit fromthe pressure source. Please note that the SP-300 packing unit is recommendedfor use with liquid media only.Part Number Description PriceSS1030-5FTSS1030-20CMPK1030-GSSP-ISSD1ME2SSP-ISSD1MC2U 416U 401U 433PGS254SLMSSI 02-0124Tubing, 316 stainless steel, 1/16” OD x 0.030” ID x 5’ longTubing, 316 stainless steel, 1/16” OD x 0.030” ID x 20 cm longTubing, PEEK (green), 1/16” OD x 0.030” IDPort Adapter, SS316, 1/16” OD tube x 1/8” NPT, 90° anglePort Adapter, SS316, 1/16” OD tube x 1/8” NPT, straightReplacement Female Nut, for port adapter, SS316Replacement Ferrule, 1/16”, for port adapter, SS316Pressure Gauge Tee, with two 10-32 fittings for 1/16” tubingPressure Gauge, 0-10,000 psig, liquid filled, stainless steelThree-way valve with bottom vent, SS316$ 15.75$ 4.32$ 2.40 /ft$ 17.00$ 16.00$ 3.45$ 2.35$ 51.00$ 75.00$ 130.004