single-rotor rake - Reco

14 15THREE-POINT ATTACHMENTWITH TRAILING DEVICETS 301 DNTS 351 DNTS 391 DN Operation with small tractors Ease of handling Neat rakingTHE ALL-ROUNDERThe single-rotor rakes with trailing device from the 300 series are outstanding due to their low weight,their sturdy design, their ease of handling and their versatile use. These rakes can therefore be usedwith a tractor performance level of as low as approx. 23 hp. Perfect for use in different regions. Thanksto its 8 or 10 tine arms and 3 or 4 tines, each arm guarantees perfect and neat raking performance at alltimes. Only the best for your quality forage!SWATHSVery exact swaths are possible even with a large forage mass thanks to the extra strong tine arms andthe long tines. Thanks to a cam track that can be adjusted on the outside, optimal swath formation isguaranteed at all times for all follow-up devices. In addition, the width of the swath can be adapted toyour requirements using the continuously adjustable swath former.PERFECT GROUND ADAPTATIONThanks to the wide-track chassis and movable lower link bracket, optimum ground adaptation is guaranteed.These models are particularly well suited to hillsides.TS 391 DNDRIVEThe drive is via single-stage bevel gear with a split double bearing pinion shaft. In addition, the gear boxand cam track are enclosed and dust-tight, which guarantees a long service life.Swath deposit on the right – makes ergonomic sense!At a glance:Single-rotor rake with trailing deviceLow weight, sturdy designNeat rakingTop swath formingPerfect ground adaptationGood on hillsidesSturdy, dust-tight, triple bearing driveD-shaped three-point headrackAdjustable lateral inclinationWE RECOMMEND: Contact wheel 15/6.00-6, forbetter ground adaptation Tandem axle, for smoothrunning neat work in allconditions and with all typesof forage