single-rotor rake - Reco

16 17TS 400 DNTS 426 DNTS 456 DNTHREE-POINT ATTACHMENTWITH TRAILING DEVICEIF WIDER WIDTHS ARE REQUIREDThe 400 series differs from the 300 series through its large-dimensioned rake head and the larger workingwidth that comes as a result. With up to 12 tine arms and 48 tines, neat and even raking is alwaysguaranteed for working widths of up to 4.50 meters. The series features a very sturdy design, ease ofhandling and excellent manoeuvrability due to its standard trailing device.LARGEWORKINGWIDTHS Large working width Enormous raking performance Exact swathsSWATHSVery exact swaths are possible even with a large forage mass thanks to the extra strong tine arms andthe long tines. Thanks to a cam track that can be adjusted on the outside, optimal swath formation isguaranteed at all times for all follow-up devices. In addition, the width of the swath can be adapted toyour requirements using the infinitely adjustable swath former.PERFECT GROUND ADAPTATIONThanks to the wide-track chassis and movable lower link bracket, optimum ground adaptation isguaranteed, even for large working widths. These models are particularly well suited to hillsides.DRIVEThe drive is via single-stage bevel gear with a split double bearing pinion shaft. In addition, the gear boxand cam track are enclosed and dust-tight, which guarantees a long service life.At a glance:Single-rotor rake with trailing deviceLarge working widthsNeat rakingTop swath formingPerfect ground adaptationGood on hillsidesSturdy, dust-tight, triple bearing driveD-shaped three-point headrackAdjustable lateral inclinationWE RECOMMEND: Spring-centred contact wheel15/6.00-6, for better groundadaptation Tandem axle with 16/6.50-8super-balloon tyres