Evolution Quick Pop-up - Exhibition Stands | Display Systems

Straight Graphic panel finishing13 2Apply mag tape to straight panels accordingto the diagram (all dimensions are approx).NB - If using graphic panels with straight hangersfollow the Curved graphic panel finishing instructions.Straight Pop-up assembly (using horizontal mag bars)1 2 3 4Take the frame, ensuring that the hanging studs are at the top. Stand the frame on the floor (2)and open up (3) until the locking arms lock the frame securely into place (4)56789Add the mag bars ontothe frame, vertically forfront and D-end panels.Then add horizontal magbars across the top andbottom of the frame.For Double sided graphicsfit mag bars to the rear,running vertically andhorizontally across thepop-up frame.Ensure that the magbars lock onto themagnetic pip securely.Unwrap each graphiccarefully and attach tothe system.Smooth the graphic ontothe mag bars, ensuringthat it sits flat and isaligned to the centre lineof each mag bar.10 11 12Repeat steps 8 and 9 for the rest of the graphic panels.This applies to front and rear graphics if applicable.Attach the D-End panelfront vertical edge.Curve the graphic roundto the back and attach theback vertical edge tocomplete..Important note:Remove all mag bars beforecollapsing the pop-up frame.NB - If using graphic panels with Straight hangers follow the assembly instructions for Curved pop-ups.

3 x 4 - Curved3 x 3 - Curved3 x 2 - CurvedSingle Sided21 mag bars, 4 front curved &2 D-end hangersDouble Sided30 mag bars, 4 front curved,4 rear curved & 2 D-end hangersSingle Sided18 mag bars, 3 front curved &2 D-end hangersDouble Sided24 mag bars, 3 front curved,3 rear curved & 2 D-end hangersSingle Sided15 mag bars, 2 front curved &2 D-end hangersDouble Sided18 mag bars, 2 front curved,2 rear curved & 2 D-end hangersOther products in our Pop-up range include:Xpress• Quality anodised finish• All front curve / D-end panels arethe same size• Smaller graphic size ‘Midi’ versionalso available• Option for graphics to be displayedboth sides3 x 1 - Curved3 x 4 - StraightSingle Sided12 mag bars, 1 front curved & 2D-end hangersDouble Sided12 mag bars, 1 front curved,1 rear curved & 2 D-end hangersSingle Sided21 mag bars, 4 straight hangersor 8 horizontal mag bars& 2 D-end hangersDouble Sided30 mag bars, 8 straight hangersor 16 horizontal mag bars& 2 D-end hangersSpider• Small 8mm tube frame withhigh tech styling• Quality anodised aluminium finish• Tallest pop-up in the range• Narrow footprint for use in morecompact spaces• Enhanced graphic support• Option for graphics to bedisplayed on both sides3 x 3 - StraightSingle Sided18 mag bars, 3 straighthangers or 6 horizontal magbars & 2 D-end hangersDouble Sided24 mag bars, 6 straighthangers or 12 horizontal magbars & 2 D-end hangers3 x 2 - StraightSingle Sided15 mag bars, 2 straight hangersor 4 horizontal mag bars& 2 D-end hangersDouble Sided18 mag bars, 4 straight hangersor 8 horizontal mag bars& 2 D-end hangers3 x 1 - Straight(All dimensions are approx and are in mm)Single Sided12 mag bars, 1 straight hangeror 2 horizontal mag bars &2 D-end hangersDouble Sided12 mag bars, 2 straight hangersor 4 horizontal mag bars &2 D-end hangers