Safety Data Sheet

DRSafety Data Sheetaccording to 1907/2006/EC, Article 31Page 1/4Printing date 09.03.2009 Revision: 09.03.20091 Identification of substance· Product details· Trade name greenteQ D4-Leim 2K· Application of the substance / the preparation Adhesives· Manufacturer/Supplier:VBH Holding AGSiemensstrasse 38D-70825 Korngal-MünchingenTel. +49 (0) 7150 / 15-0http://www.vbh.deEmail:info@vbh.de· Informing department: info@vbh.de· Emergency information:+49 (0) 89-19 240tox@lrz.tum.de2 Hazards identification· Hazard designation: void· Information pertaining to particular dangers for man and environmentThe product does not have to be labelled due to the calculation procedure of the "GeneralClassification guideline for preparations of the EU" in the latest valid version.· Classification systemThe classification is in line with current EC lists. It is expanded, however, by information fromtechnical literature and by information furnished by supplier companies.* 3 Composition/information on ingredients· Chemical characterization· Description:Aqueous, modified adhesive based on polyvinyl acetateWater-based adhesive, based on Vinyl acetate· Dangerous components: Void· Additional information For the wording of the listed risk phrases refer to section 16.4 First aid measures· General information No special measures required.· After inhalation Supply fresh air; consult doctor in case of symptoms.· After skin contact The product is not skin irritating.· After eye contact Rinse opened eye for several minutes under running water.· After swallowing In case of persistent symptoms consult doctor.5 Fire fighting measures· Suitable extinguishing agentsWater hazeFire-extinguishing powderCarbon dioxide· Protective equipment: No special measures required.6 Accidental release measures· Person-related safety precautions: Not required.(Contd. on page 2)GB

DRSafety Data Sheetaccording to 1907/2006/EC, Article 31Page 2/4Printing date 09.03.2009 Revision: 09.03.2009Trade name greenteQ D4-Leim 2K(Contd. of page 1)· Measures for environmental protection: Dilute with much water.· Measures for cleaning/collecting:Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).· Additional information: No dangerous materials are released.7 Handling and storage· Handling· Information for safe handling:No special measures required.No special precautions necessary if used correctly.· Information about protection against explosions and fires: No special measures required.· Storage· Requirements to be met by storerooms and containers:Store only in the original container.Protect from Freezing· Information about storage in one common storage facility: Not required.· Further information about storage conditions: Protect from frost.8 Exposure controls and personal protection· Additional information about design of technical systems: No further data; see item 7.· Components with critical values that require monitoring at the workplace:The product does not contain any relevant quantities of materials with critical values that have to bemonitored at the workplace.· Additional information: Based on information valid at the time of writing.· Personal protective equipment· General protective and hygienic measuresThe usual precautionary measures should be adhered to in handling the chemicals.· Protection of hands:The glove material has to be impermeable and resistant to the product/ the substance/ thepreparation.· Material of glovesThe selection of the suitable gloves does not only depend on the material, but also on further marksof quality and varies from manufacturer to manufacturer. As the product is a preparation of severalsubstances, the resistance of the glove material can not be calculated in advance and has thereforeto be checked prior to the application.· Penetration time of glove materialThe exact break through time has to be found out by the manufacturer of the protective gloves andhas to be observed.· Eye protection: Safety glasses recommended during refilling.9 Physical and chemical properties:· General InformationForm:Colour:Smell:FluidWhiteCharacteristic· Change in conditionMelting point/Melting range: Not determinedBoiling point/Boiling range: 100°C(Contd. on page 3)GB

DRSafety Data Sheetaccording to 1907/2006/EC, Article 31Page 3/4Printing date 09.03.2009 Revision: 09.03.2009Trade name greenteQ D4-Leim 2K· Flash point: Not applicable· Self-inflammability: Product is not selfigniting.· Danger of explosion: Product is not explosive.· Vapour pressure at 20°C: 23 hPa· Density at 20°C 1.09 g/cm³· Solubility in / Miscibility withWater:· pH-value at 20°C: 6Fully miscible· Solvent content:Organic solvents: 0.0 %Water: 51.6 %· Solids content: 50.0 %(Contd. of page 2)10 Stability and reactivity· Thermal decomposition / conditions to be avoided:No decomposition if used according to specifications.· Dangerous reactions No dangerous reactions known· Dangerous products of decomposition: No dangerous decomposition products known11 Toxicological information· Acute toxicity:· Primary irritant effect:· on the skin: No irritant effect.· on the eye: No irritant effect.· Sensitization: No sensitizing effect known.· Additional toxicological information:The product is not subject to classification according to the calculation method of the General ECClassification Guidelines for Preparations as issued in the latest version:When used and handled according to specifications, the product does not have any harmful effectsaccording to our experience and the information provided to us.12 Ecological information:· General notes:Water hazard class 1 (Self-assessment): slightly hazardous for water.Do not allow undiluted product or large quantities of it to reach ground water, water bodies orsewage system.* 13 Disposal considerations· Product:· RecommendationMust not be disposed of together with household garbage. Do not allow product to reach sewagesystem.(Contd. on page 4)GB

DRSafety Data Sheetaccording to 1907/2006/EC, Article 31Page 4/4Printing date 09.03.2009 Revision: 09.03.2009Trade name greenteQ D4-Leim 2K(Contd. of page 3)· European waste catalogue08 04 14 aqueous sludges containing adhesives or sealants other than those mentioned in 08 041308 04 16 aqueous liquid waste containing adhesives or sealants other than those mentioned in 0804 15· Uncleaned packagings:· Recommendation: Disposal must be made according to official regulations.· Recommended cleaning agent: Water, if necessary with cleaning agent.14 Transport information· Land transport ADR/RID and GGVS/GGVE (cross-border/domestic)· ADR/RID-GGVS/E Class: -Not regulated.· Maritime transport IMDG/GGVSea:· IMDG/GGVSea Class: -Not regulated.· Marine pollutant: No· Air transport ICAO-TI and IATA-DGR:· ICAO/IATA Class: -Not regulated.15 Regulatory information· Designation according to EC guidelines:Observe the normal safety regulations when handling chemicalsThe product is not subject to identification regulations under EC Directives and the Chemicals(Hazard Information and Packaging for Supply)(CHIP) Regulations.· National regulations· Technical instructions (air): This classification is only relevant for Germany and Austria.· Water hazard class: Water hazard class 1 (Self-assessment): slightly hazardous for water.· Other regulations, limitations and prohibitive regulations· VOC (EU) in %: 3.17 %· VOC (EU) in g/l: 79.0 g/l16 Other information:These data are based on our present knowledge. However, they shall not constitute a guarantee forany specific product features and shall not establish a legally valid contractual relationship.The information provided about the product on this Safety Sheet has been compiled fromknowledge of the individual constituent.The data given here only applies when product used for proper application(s). The product is notsold as suitable for other applications - usage in such may cause risks not mentioned in this sheet.Do not use for other application(s) without seeking advice from manufacturer.· Department issuing data specification sheet: Quality assurance· Contact: info@vbh.de· * Data compared to the previous version altered.GB