200 W 200 W MH - Hidromek

EXCAVATORSince the very first phase of its design, the new generation GEN has been developed so thatthe user could control the machine with an extraordinary ease, in an environment of totalcomfort, feeling himself like in his own office.WiperControlsThrottle LevelControllerDisplayDriving ModesThat is why, GEN - the new generation of excavators Hidromek, for first time in its class, hasbeen equipped with OPERA (Hidromek Operator Interface).LightingControlsMenuNavigationOPERA, the user interface especially developed for the GEN series Hidromek excavatorsintegrates all the control devices on a aesthetically designed console ergonomically locatedfor easy access and deal, a TFT color screen with high resolution, and the Electronic ControlUnit.With OPERA it is extraordinary easy to understand and manage functions such as:Electronic Visual DisplayAudio SystemControl ButtonsEngine Start-Stop• Engine RPM control• Navigating and scrolling the menus• Choose the most appropriate mode of working• Control the lights and wipers• Manage radio/MP3• Stop-Start the engine to ensure maximum fuel economy during the waiting times.• Control of the cameras – rear view and on the arm (optional)• Observe the conditions information, such as hydraulic pressure, engine coolant andhydraulic oil temperature, turbo boost pressure, fuel pressure, atmosphere pressure andothers.• Error Codes• Times of work - as a time of excavating, work with attachments (breakers etc), travel, etc.• Time to the next maintenanceAudio VolumeInstrument Panelamong others.Electronic Control Unit

HMK 200 WEXCAVATOROpera Control System• Perfect control• Fuel economy• Long component life• Low noise level and exhaust gas emission• Operator comfort• Warning and protection (security) features• Malfunction / fault indication feature• Auxiliary functionsOpera Control System ,consists of 4 power mode and 3 work modes,introduces operator most suitable working conditions in accordancewith requirements of work with high performance and economic workingoptions through perfect matching with diesel engine and hydraulic pump.MODE SELECTIONSA-Power Mode SelectionPOWER MODEF (Sensitive Mode)E (Economy Mode)P (Power Mode )HP(High Power Mode)This mode is used for light works requiring sensitivemovementsThis mode is for light work in which low fuelconsumption is desired.P mode is for general digging and loading works.This mode is for heavy and high speed requiredworks. It is suitable for when productivity is consideredB- Working Mode SelectionWORKING MODED (Digging Mode)It is designed for normal digging operations.B (Breaking Mode)It is designed for breaking operations.O (Optional attachment Mode) It is designed to work with optional attachment.WARNING AND PROTECTION FEATURESContinuous Monitoring:Opera Control System, continuously monitors most important parametersof machine and promptly warn operator in case of any abnormality.Such warning can be in three ways:• Audible warning• Warning lights• IndicatorsOverheating Prevention Function:If engine water temperature and hydraulic oil temperature exceedscertain temprature , electronic control system provides continuous workby decreasing pump flow rate and engine rpm .Automatic preheating :Automatic preheating provides reaching machine to optimum workingtemperatures by measuring air intake temparature , cooling watertemperature and hydraulic oil temperature of diesel engine. Machinecontrol unit removes engine rpm from idling to 1200 rpm when enginecooling water is lower than 30°C or hydraulic oil temperature is lowerthan 0°C and stay on this rpm until warm up . By this way early wearingof main components beginning engine in the first place is prevented.However if there is emergency and machine is required to be movedquickly , such function can be cancelled by pressing button on displaypanel.Automatic Malfunction Indication:When machine displays any malfunction, code representing suchmalfunction appears on display panel for warning purpose.Malfunction Messages Memory:Opera Control System has feature of keeping occured malfunctions inthe machine in its memory.Fuel filter Congestion Warning:Notifies pollution of fuel filter to operator by view.TECHNICAL SPECIFICATIONSManuel Mode Selection:In case of any malfunction in control system of the machine, it is possible toswitch to manual mode and continue operation by means of a button locatednear fuse box. Hydraulic pump flow rate is fixed and also engine rpm can be setbetween 900 rpm and maxinumum rpm manually.Component Information and Main Setting Values:Information regarding serial numbers of the components of the machine can beloaded on the control unit and may be recalled when required. It is also possibleto read the required malfunction information on the display panel through thecontrol unit during fault searching.Program Loading and Modification:There are computer connection ports on control unit of the machine.By means ofsuch ports, programs of which parameters are either the same or different canbe loaded on the machine.AUXILIARY FEATURESAutomatic Powerboost:When more power than normal working conditions is needed, electronic controlsystem allows working at high performans through increasing system pressure.Automatic Powershift:If more power is needed during digging and travel , required power is obtainedby mounting engine rpm and pump flow rate above setup valueAutomatic Idling:While levers are in the middle position, in case of no movements at levers,electronic control system decreases engine rpm to 1200 rpm and then decreaseto idling in order to prevent redundant fuel consumption. Automatic Idlingfunction can be activated also at any time determined by operator. Whenoperator touches to lever , engine rpm and pump flow rate of previously selectedmode is restored . This function can be canceled by operator if he desires. Bythis way desired power from engine can be obtained.Condition Information:Instant, hourly and total fuel consumption information of machine can bemonitored. Also , many parameters such as; battery voltage , engine load, pumppressures , cooling water temperature, and hydraulic oil temprature can bemonitoredMaintenance Information:There is warning system that informs operator about periodic maintenancetime automotically. Also parameters related with machine maintenance can bemonitored on control panel.Operation Hours:Detail working hours of machine , such as working hours, travel hours,attachment hours , breaking hours, are kept on the memory.Anti-Theft System:Anti-theft system is set up by defining private code for each operator.Language Selection:Selection of multi-language on the remote control panel.

HMK 200 WEXCAVATORACCESSORIESSTANDARD BUCKETOPTIONAL BUCKET SELECTION DIAGRAMHEAVY DUTY TYPEWidthCapacityWeightNumber of teeth5 3 3 4 4 6Note: Single radius buckets and rock type buckets are availableBREAKOUT FORCESArm lengthBucket diggingforce (power boost)Arm breakout force(power boost)Bucket diggingforce (power boost)Arm breakout force(power boost)“Material density less than 1,900 kg/m³ (wet excavation, etc)”“Material density less than 1,600 kg/m³ (dry excavation, etc)”“Material density less than 1,200 kg/m³ (dry soil, clay, lime, coal etc)”“Not suitable”WARNING• Optional attachment and accessory standards offered withmachines may differ according to countries.• Please consult your authorized dealer to provideattachments and accessories.

LIFTING CAPACITIESEXCAVATORHMK 200W Boom: 5.8m, Arm: 2.40m, Bucket: 1.00m³ (SAE), Front Dozer / Rear Leg: Front: SideHMK 200W MH Boom: 6.8m, Arm: 4.1m: Front: SideA, mB, mLoad Unit1.53.0 4.5 6.0 7.5Maximum ReachA, mX, mH, mLoad Unit34.5 6.0 7.5 9.0 10.5Maximum ReachR, m6.0kg*4650*4650*4000*40007.3510.5kg*7550*7550*6600*6600*6400*64006.504.5kg*6350*6350*5250*5250*47004250*405037507.999.0kg*6300*6300*5700*5700*550050008.123.0kg*8150*8150*60505900*51004100*425034008.317.5kg*6350*6350*5650*5650*51004250*505041009.211.5kg*96008800*68005600*54503950*470033008.355.0kg*8100*8100*6750*6750*58005650*51504250*475036009.960 (ground)kg*6000*6000*101508500*72505400*56503850*520034008.104.5kg*9350*9350*7300*7300*60505500*52004150*4500330010.44-1.5kg*7450*7450*11250*11250*99509950*72505350*55003800*540038007.553.0kg*10650*10650*79007450*63505350*53004100*44503250*4300315010.69-3.0kg*12550*12550*89508950*65505400*565047006.621.5kg*7600*7600*82007150*64505150*52504000*42503200*4100310010.71-4.5kg*9250*9250*6600*6600*5650*56505.080 (ground)kg*6150*6150*80006950*63005050*50503900*38503200*3850315010.52-1.5kg*3350*3350*7050*7050*73006850*58005000*45003900*3500355010.11-3.0kg*7300*7300*6050*6050*4800*4800*3500*3500*3000*30009.44A Load RadiusB Load Point HeightC Lifting CapacityNotesLifting capacities are according to SAE J1097 and ISO 10567.Load point is on the bucket.Lifting capacity cannot exceed 75% of tip over capacity or87% of total hydraulic capacity.Values marked with ( * ) are limited by hydraulic capacity.5. Not included polyp attachment

200 W MH DIMENSIONSEXCAVATORGENERAL DIMENSIONSWORKING DIMENSIONSBoom DimensionArm Dimension6,800 mm4,100 mmBoom DimensionArm Dimension6,800 mm4,100 mmA - Axle DistanceB - ThreadC - Rotation Axis – Front Axle DistanceD - Rotation Axis – Rear Axle DistanceE - Upper Chassis to GroundClearanceF - Counterweight DistanceF ´ - Countweight Turning RadiusG - Upper Frame WidthH - Cab HeightH´- Cab Rising HeightHy- Total Cab HeightI - Outrigger Ground ClearanceJ - Width at TiresK - Outrigger Width (Overall)L - Outrigger Digging DepthM - Overall Length / TransportN - Boom Height / Transport2,780 mm2,800 mm2,400 mm5,580 mm340 mm2,720 mm3,840 mm125 mm9,940 mm3,150 mmO - Maximum Reach DistanceP - Maximum Reach at Ground LevelR - Maximum DepthS - Maximum HeightT - Polyp-Grab and Equipment Height10,720 mm10,520 mm4,320 mm12,250 mm2,230 mm

HMK 200 WEXCAVATORDETAILS

EQUIPMENT LISTEXCAVATORSpecial Equipment List2.92 m armVarious size bucketsAutomatic lubrication systemHydraulic breaker lineRotator lineBoom safety valveArm safety valveOverload warning systemHydraulic breakerHydraulic quick couplerRipperRotatorAdditional working lamp, above cap, rearWindscreen protective nettingHeadlightsHidromek Smart LinkCameraRotational moving hydraulic shear installationStandard Equipment ListRadio/MP3Air conditionerCab heating systemFOPS approved cabinComputer connection portFuel transfer pumpFront air filterDouble air filterAutomatic idlingEngine pre-heating facilityOverheating, low engine pressure, air filterclogging indicatorsBattery charge warning systemWorking Lamp, above cab, frontBeacon Lamp

(EN) December 2011Your Local Distributor:FACTORY - HEADQUARTERSAyaº yolu 25. km 1. Organize Sanayi Bölgesi Osmanli Caddesi No: 106935 Sincan / ANKARA / TURKEYPhone: (+90) 312 267 12 60 Fax: (+90) 312 267 21 12www.hidromek.com email: export@hidromek.com.trWarningHİDROMEK has the right to modify the specifications and design ofthe model indicated on this brochure without prior notice