U-09Fl Resin MSDS - On-Hand Adhesives, Inc.

HENKEL LOCTITE CORPORATION 1001 TROUT BROOK CROSSING 06/09/03ROCKY HILL, CONNECTICUT 06067EMERGENCY PHONE: (860) 571-5100MATERIAL SAFETY DATA SHEET Page 06 of 08Product Name:Loctite(R) Hysol(R) U-09FL Urethane Adhesive ResinItem No.: 293708. EXPOSURE CONTROLS, PERSONAL PROTECTION (continued)Monitoring techniques have been developed by NIOSH and OSHA. Uponrequest the manufacturer can make available methods which aremodifications of these NIOSH and OSHA methods.Medical Surveillance: Medical supervision of all employees who handleor come in contact with isocyanates is recommended. These shouldinclude preemployment and periodic medical examinations withpulmonary function tests (FEV, FVC as a minimum). Persons withasthmatic-type conditions, chronic bronchitis, or other chronicrespiratory diseases or recurrent skin eczema or sensitization shouldbe excluded from working with isocyanates. Once a person is diagnosedas sensitized to an isocyanate, no further exposure can be permitted.RespiratoryIn some situations, a respirator may be necessaryin addition to ventilation. The use of a positivepressure air-supplied respirator is mandatorywhen: airborne concentration of isocyanate areknown to exceed 0.005 ppm; operations areperformed in a confined space or area withlimited ventilation; material is heated orsprayed. An air-purifying respirator is notgenerally recommended based on the poor warningproperties of the isocyanate.9. PHYSICAL AND CHEMICAL PROPERTIESSee Section 2 for Exposure Limits.Appearance:Odor:Boiling Point:pH:Solubility in Water:Specific GravityVolatile Organic Compound(EPA Method 24)Vapor Pressure:Vapor Density:Evaporation Rate(Ether = 1)Clear liquidOdorlessNot determinedDoes not applyReacts slowly with water to generate carbondioxide.Not determinedNot availableNot availableNot availableNot available10. STABILITY AND REACTIVITYStability:StableHazardous Polymerization: May occur. Contact with moisture, other materialswhich can react with isocyanates, or temperaturesabove 400°F, may cause polymerization.Incompatibility:Water, amines, strong bases, alcohols. Will cause