COLD ROLLING MILL FACILITY for STEEL COIL and SHEET

LINE VCOMBINED TEMPERING AND TENSIONLEVELING LINEIntended for cold rolled strip, annealed cold rolled strip and hot deep galvanized stripManufacturerSiemens VAI ClecimYoM 1989Note: this line consists of two independent units: one temper mill and one tension leveler.Strip width600 – 1.300 mmStrip thickness0,2 – 1,5 mmMaterial Yield Point200 – 500 N/mm²Strip/MaterialMaterial Tension Strength300 – 700 N/mm²Leveler Tensionmax. 15.000 daNStrip elongation (two high D-Mill) max. 5%Strip elongation (tension leveler) max. 2%Four High Temper Mill Hydraulic pressure max. 1.000 tNote: This line is constructed for continuous strip tempering and leveling. These two basic line units maybe used together or separately, depending on the characteristics of material needed.Included is the perpendicular cutting and strip edge slitting as well as the electro-static strip oiling.All data have been prepared to the best of our knowledge, however we can not be held liable for any errors and or omissions.5 C o r e B u s i n e s s I n d u s t r i e s B VH e a d O f f i c e : O r a n j e N a s s a u l a a n 6 9 • 1 0 7 5 A L A m s t e r d a m • t h e N e t h e r l a n d sKvK Amsterdam: 30117967 • T. +31 20 470 0989 • F. +31 20 470 2084 • info@cbiworld.com