SLEEPING REALLY WELL - Dormiente

DELUXE 2MDELUXE 4M50 51DELUXE 2 M 2-motor technology for comfort adjustment of back and leg area.DELUXE 4M With all the qualities of the 2M slats but with 4 motors intotal. Motors 1 and 2 control the comfort levels of the head and foot area.Motor number 3 adjust the calves’ area thereby affecting hip and lower backpositioning. The additional 4th motor regulates the slats responsible for headand upper-spine comfort.DELUXEM O T O R S L AT SCLASSICWORLD CLASS TECHNOLOGY FOR OPTIMAL COMFORT AT AGLANCE:• Height approx. 90mm• Frame made from beech plywood• Shoulder-cushion made from 100% natural latex with high all-pointelasticity for optimum support of the shoulder area• Head- and foot zone with softer, more responsive slat cups• Specific shoulder comfort zone• 3-level adjustability of the hip and lower back area• Particularly high raise slat positioning for optimal support• Slat cups made from hard-wearing Hytrel• Choose between 2 or 4 motors to adjust different areas of the slats• Demand switch shuts off electric circuit completely to stopelectro-magnetic fields when not in useTHE SYSTEM 7 MOTOR FRAME AT A GLANCE:• Excellent combination of functionality, flexibility and stability• The only all-point-elastic, adjustable slatted frame on the market• Consistent all-point elasticity throughout the entire width and length• Robust frame from laminated beech, oiled and waxed• Adaptable to either the back/side or front sleeping position• Individual elements available in different degrees of firmness• Comfort can be individually adjusted at any time• Natural fabrics, strictly tested for chemical residues• Suitable for most bed frames depending on slat lowering set-up.• Height of frame 7.0 cm (wood) + 9.0 cm (SYSTEM 7 element) = 16.0 cm• Emergency power cut out system• Demand switch to shut off electric circuit when not in useM O T O R S L ATSYSTEM 7 ®NEW CLASSIC 2MThe new motor slat CLASSIC 2M adds the convenience and comfort of2 motor adjustability to the benefits of the CLASSIC NATURAL S slat system(see page 48). The height of the frame is approx. 100mm, frame madefrom beech plywood, optimal positioning of the legs (incremental adjustmentof the calves area for pressure release of back) due to innovative placement ofthe 2-motor technology, 44 individual slats with honeycomb-surface made frombeech plywood, 3x3 lower back adjustability, slat cups made from hardwearingHytrel, demand switch to shut off electric circuit when not in use, emergencypower cut out systemOur MOTOR FRAME SYSTEM 7 ® combines the convenience of amotor frame with the orthopaedic design of our individually adjustable,all-point-elastic 7 zone slatted frame, SYSTEM 7. The removable100% latex elements with their differing degrees of firmness canbe positioned individually to suit either the back | side or the frontsleeping position.