ASSEMBLY INSTRUCTIONS SOLID WOODEN BED ... - Dormiente

4ASSEMBLYOF THE CENTRAL STRUTAND THE BACK SUPPORT5ACCESSORYASSEMBLY INSTRUCTIONSSOLID WOODEN BEDPONTESLEEPING REALLY WELLPush the back support onto the threaded rods and screw these tightly on bothsides with two socket screws each (M8). Position the bed frame in the desiredposition in your bedroom. Make sure that all the frame elements are at rightangles to each other. You can use shim material for horizontal alignment ofyour bed on uneven floors. Now insert your slatted frame system and also yourmattress into the bed frame.We wish you lots of pleasure with your new bedAnd hope that you sleep really well.4 xOPTIONALES ZUBEHÖR:BEDSIDE TABLEDear customer,We are happy that you have decided on a quality product from the natural mattressand bed manufacture Dormiente.These instructions will help you to assembly your bed. Use these instructions to findout that you do not need any previous skills as a craftsman for the assembly.In spite of taking the greatest possible care, we cannot completely exclude damagebeing caused to materials by transportation. We ask you, for this reason, to check thegoods for completeness and perfect condition first of all. Please inform us of damagecaused by transportation or manufacture and material faults before assembly sothat we can settle your claim for damages as quickly as possible. Please remember:wood is a natural product. Each tree grows in a different way, changes in the colouror grain of the wood, as well as a wood knot, are not a reason for complaint. Thisis exactly how your bed gets its individual character.Read through these instructions carefully and follow the notes. We wish you a lotof pleasure and health recuperative sleep with your new bed.Your dormiente GmbHSLEEPING REALLY WELLdormiente GmbHAm Zimmerplatz 3 • D 35452 HeuchelheimTel. +49 (0) 641 • 9 62 13 - 0Fax. +49 (0) 641 • 6 74 99E-mail: info@dormiente.comwww.dormiente.comStatus: 04-2009 information correct at the time of going to press but subject to change without noticeDr. Rüdiger PlänkerPONTE

1SCOPEOF DELIVERY2ASSEMBLYOF THE BED FRAME3ASSEMBLYOF THE CENTRAL STRUT AND THESUPPORT RAILS FOR THE SLATTED FRAMEThe construction described in the following text should be done by two peoplein order to avoid damage. Please place textiles under all the components beforeassembly. Be careful when you use tools, so that there are no pressure marks onthe wooden parts in the working area.COMPONENTSPONTEAll the parts of the frame will be laid out in the correct position. The top partis identified by the extra holes used for fastening the back support later.Continue by placing the fastening bracket at the desired height on the bed frameand screw this firnly to the centre strut.Top partBottom partSide part (left/right)Central strut with Federleiste (starting from 140 cm bed width)Fastening bracket (central strut)Socket screws M8Support rails (incl. wooden dowels and screws)Threaded rods with washers and nuts M 8Wooden dowelsAllen keyWrench1 x1 x2 x1 x2 x6 x4 x4 x20 x1 x1 xThe threaded rods are fitted to the side parts after the feet have been attachedto the side part and the wooden dowels are pushed into the holes provided forthis purpose.Please fasten the support rails to the side parts of the bed frame. Use a rubberhammer to carefully tap the short wooden dowels into the holes of the four supportrails for the slatted frame. You need four dowels for each support rail, if these arenot already in the rail.The side parts are then connected to the top and bottom part. Then screw a nut(M8) with a washer onto the threaded rods. Tighten up the connection carefullywith enclosed wrtench. Work carefully with the wriench so that there are nopressure marks on the wooden parts.Push the support rails with the wooden dowels into the holes provided for thispurpose in the side parts. The option here of selecting between two differentheights of slatted frames. Please select the lower hole in case of doubt.There is a small hole in the middle of each support rail. Please screw in one of theenclosed screws here to secure the support rail.OPTIONAL ACCESSORY:Back support (the fittings are already preassembled)Socket screws M 81 x4 xBEDSIDE TABLE