Charles Endirect Ltd

GLAND PLATES AND EXTENSION BOXESIsolatorEnclosureL1L2L3GlandPlatesPlasticGrommetA* = PlasticB* = BrassHolesC* = BrassFerrulesK* = PlasticM* = BrassHolesP* = BrassFerrulesX6X0X4Extension Boxes and Their Gland PlatesN/A- accepts A, B and C Gland Plates- accepts X1, X2, X3 and D, E and F Gland Plates- accepts K, M and P Gland PlatesD* = Plastic X1 - accept D, E and F Gland PlatesL4E* = BrassHolesX2 - accept D, E and F Gland PlatesX3 - accepts G, H and J Gland PlatesF* = Brass X5 - fits onto X3 for extra termination space and acceptsFerrulesG, H and J Plates* Digit to denote number and size of holes/ferrulesTermination RacksThere is a wide range of terminal block arrangements in the extension boxes to facilitatethe termination and looping of larger cables. These are Termination Racks (.../TR../...).Selection Chart for Standard Types of IsolatorsGuide to using the chart in following pages:To identify required product :1. Select incoming cable size in first column, e.g. 4mm, 3C2. Select incoming cable configuration in second column, e.g.single looped3. Select number of outgoing fused circuits, e.g. 1 upward circuit4. Select gland option, e.g. BW glandsIn the example above (4.0mm 3C incoming looped with 1 upward fused circuit withcompression glands), the required unit is L2/SFE/B1.(Note: the same unit with a 6 amp MCB would be L2/SM6E/B1.)Isolator with Pre-Wired Tails IsolatorOur standard double pole, single fuse isolator can be supplied fitted with an internalearth, plastic gland plate and incoming tails including two earth tails, one with 8mmcrimpOrder Reference: L2/SFE/A1/6.0/350+350E+510E/M8 Lug Tailswww.charlesendirect.comTel@ 01963 828400 October 2013