CEL | Feeder Pillars | Distribution Pillars - Charles Endirect Ltd

CEL | Feeder Pillars | Distribution Pillars 

www.charlesendirect.com

| 2 | 

INTRODUCTION 

The CEL range of feeder pillars has been tried and tested in an extensive variety of applications 

and conditions to prove their durability against the elements and the rigours of all urban and rural 

environments. CEL provides one of the most comprehensive ranges of feeder pillars, both shells 

and pre-wired with distribution equipment, in the UK market, with a range of sizes and options to 

suit a wide variety of applications. 

The range includes Mini pillars manufactured from 3mm mild steel to Maxi double door pillars 

manufactured from 5mm mild steel. Pillars are also manufactured in Grade 304 or 316 stainless 

steel and GRP. Standard finish is hot dipped galvanised to BSEN ISO 1461, but 

all pillars can be powder coated to RAL or BS colours with options of anti-graffiti 

and HA specifications. 

CEL are committed to providing excellent quality and service and have made a 

deliberate investment in finished stock to ensure the promptest delivery times. 

All products are designed, manufactured and inspected under stringent Quality 

Control Systems resulting in products and service levels which comply with, or 

exceed, the requirements of current legislation and regulations. 

COMPLIANCE 

OPERATING STANDARDS 

Quality Management System ISO 9001:2008 

3mm & 5mm Mild Steel HR4 

Stainless Steel CR304 & CR316 

Hot Dip Galvanising BSEN ISO 1461 

Pre-wired design, build and test BSEN 60439-1 

Electrical Installation BS7671 IEE Wiring Regs 17th Edition 

Welding BS4872 

Hazard Warning Labels BS5378 

MCB BS 60898 

Switch Fuse BSEN 60947-3 

Cables BS 6364

Mini Range FMP SMP RMP 

The advantages for you 

Manufactured for Quality: 

3 Constructed from 3mm steel plate hot dipped galvanised to 

BSEN ISO 1461 

3 Powder Coated finish also available – please specify colour 

3 12mm external grade plywood fully treated backboard 

Anti-Vandal Features: 

3 Fitted with tri-head locks 

3 Alternative locks available 

Ease of Installation: 

3 Detachable door 

3 Ground level clearly marked 

3 6mm brass earth stud on pillar and door with 500mm earth strap 

3 Hazard warning labels to BS5378 

FMP unique features 

3 Folded door with cut away side – improved access 

SMP unique features 

3 Flat fitting door – improved ingress protection 

RMP unique features 

3 Recessed door with integral door handle – easy to open 

3 Supplied complete with painted root 

3 8mm screw thread lock for added security 

3 Standard approved unit in Southern Ireland to ESB specification 

Optional Extras 

Description Order Code (add to ref) 

One louvre at the top and bottom of door LP 

Painted Root PR 

Powder Coat Paint Colour 

Security Hex Lock HEX 

Highways Agency Paint Finish G2 

EXTERNAL DIMENSIONS (mm) BACKBOARD 

WORKING 

DEPTH DOOR APERTURE WEIGHT 

Ref H W D R O/AH H W H W Kg 

FMP15 460 300 150 150 610 290 285 130 280 285 17 

FMP20 700 160 125 300 1000 600 145 105 570 150 14 

FMP30 700 160 150 300 1000 600 145 130 570 150 17 

FMP40 700 210 150 300 1000 600 200 130 570 195 20 

SMP30 700 160 150 300 1000 600 150 150 580 142 16 

SMP40 700 210 150 300 1000 600 200 200 580 192 19 

SMP50 700 210 210 300 1000 600 200 200 580 192 23 

SMP60 950 360 150 300 1250 800 350 350 780 342 33 

RMP30 680 285 160 320 1000 550 235 118 550 222 28 

RMP40 673 400 225 360 1033 545 335 183 545 335 40 

|3 |

Midi Range BDP 




BSEN ISO 1461 

3 Powder coated finish also available – please specify colour 


3 Fitted with cast stainless steel block hinges 

3 Hinged door with IP55 seal for improved ingress protection 


3 Recessed Door 

3 Fitted with twin tri-head locks 

3 Alternative locks available 

BDP unique features 

3 Detachable root 

3 Heritage option available 

BDP03 unique features 

3 To DRD NI Specification 

3 Painted green 

BDP 

3 Fitted with CLL anti-vandal locks 

3 Fitted with hasp & staple for added security 

3 Enclosed root section with removable front plate for easy access 

3 Document holder fitted 

BDP/FP2 unique features 

3 Fitted with hasp & staple for added security 

3 Fitted with CLL anti-vandal locks as standard 

3 Louvres fitted on both sides for ventilation 


| 4 | 


One louvre at the top and bottom of door LP 

Anti-vandal locks CLL 

Yale Lock Yale 

Hasp & Staple HS 





3 Painted root as standard 

3 6mm brass earth stud on pillar and door with 500mm earth strap 

3 Will accept CEL stainless steel distribution boards 


CEL cast stainless steel hinge as 

fitted in BDP and CFP ranges 


WORKING 



BDP50 750 250 150 300 1050 650 230 130 550 144 24 

BDP60 850 350 225 300 1150 750 330 205 650 244 26 

BDP70 950 450 250 300 1250 850 430 230 750 344 47 

BDP80 1050 550 275 300 1350 950 530 255 850 444 60 

BDP90 1150 650 300 300 1450 1050 630 280 950 544 75 

BDP100 1250 800 325 300 1550 1150 780 305 1050 694 102 

BDP03 770 700 210 250 1020 685 685 190 600 594 61 

FP2 710 450 250 300 1010 590 430 230 490 345 45 

BDP03 

FP2

Maxi Range CFP 




BSEN ISO 1461 


3 Hinged door(s) with IP55 seal for improved ingress protection 


3 Door stay locks door at 90° (5mm pillars) 

3 3mm pillars fitted with cast stainless steel block hinges 

3 5mm pillars fitted with cast stainless steel hinges with integral 

door stay 


3 Fitted with anti-vandal locks 

3 3mm pillars have recessed door(s) 



Louvre panel with three slats on each side LP 

Yale Lock Yale 

Hasp & Staple HS 




3 Detachable painted root as standard 

3 6mm brass earth stud on pillar and door(s) with 500mm 

earth strap 


3 Complete with lifting eyes 



WORKING 



3mm SINGLE DOOR MAXI 

CFP320 1350 800 350 400 1750 1170 780 300 1050 695 87 

3mm DOUBLE DOOR MAXI 

CFP350 1350 1200 450 400 1750 1170 1180 400 1050 1095 165 

5mm SINGLE DOOR MAXI* 

CFP510 1350 600 450 400 1750 1170 580 410 1050 520 144 

CFP520 1350 800 450 400 1750 1170 780 410 1050 720 158 

CFP540 1350 1000 450 400 1750 1170 980 410 1050 920 207 

5mm DOUBLE DOOR MAXI* 

CFP550 1350 1200 450 400 1750 1170 1180 410 1050 1120 226 

CFP572 1600 1500 450 400 2000 1420 1480 410 1300 1420 320 

CFP580 1600 2000 450 400 2000 1420 1980 410 1300 1920 405 

CFP590 1600 2500 450 400 2000 1420 2480 410 1300 2420 436 

*5mm CFP Pillar Stainless Steel Hinge 

3 Precision cast stainless steel hinge assembly with integral door stay feature 

3 Locks door at 90 degrees 

3 The hinge is robustly constructed using a structural geometry that optimises stiffness 

3 Stay locking is simple, reliable and elminates risk from ‘wind slamming’ doors 

CEL stainless steel hinge and 

door stay as fitted to 5mm CFP 

pillars. 

| 5 |

Stainless Steel Feeder Pillars 

With a design life of some 50 years the CEL range of Stainless Steel 

Feeder Pillars offer the ultimate fit and forget durability and long 

service. Available empty or pre-wired across the range, the BDP 

series will accept CEL’s range of stainless steel distribution boards. 



3 Constructed from 3mm Grade 304 stainless steel 




3 Fitted with twin tri-head locks – Anti-vandal locks available 



3 6mm brass earth stud on pillar and door with 500mm 

earth strap 


FMP/S unique features 

3 Folded door with cutaway side - improved access 

SMP/S unique features 

3 Flat fitting door - improved ingress protection 

BDP/S unique features 

3 Hinged door with IP55 seal for improved ingress protection 

3 Fitted with cast stainless steel block hinges 



WORKING 



FMP30/S 700 160 150 300 1000 570 145 130 570 145 17 

FMP40/S 700 210 150 300 1000 570 195 130 570 195 20 

SMP30/S 700 160 150 300 1000 600 150 130 570 145 16 

SMP40/S 700 210 150 300 1000 600 200 130 580 195 19 

BDP60/S 850 350 225 300 1150 750 330 205 650 245 36 

BDP70/S 950 450 250 300 1250 850 430 230 750 345 47 

BDP80/S 1050 550 275 300 1350 950 530 245 850 445 60 

BDP90/S 1150 650 300 300 1450 1050 630 280 950 545 75 

Bespoke Stainless Steel Feeder Pillars 

In addition to holding stocks of the standard range of stainless 

steel pillars, CEL design and build bespoke stainless steel pillars 

to meet specific requirements including grade 316. 

| 6 |

City Range Of Specialised Architectural Feeder Pillars 

A selection of pillars manufactured in either stainless steel or galvanised steel for temporary 

supply applications. This range offers solutions combining performance, quality and style. 

Standard CEL Market Trader advantages for you 

3 Manufactured for Quality 

3 Anti-Vandal Features 

3 Ease of Installation 

The Smithfield 

Unique Features 

3 Constructed from 3mm steel plate 

3 Standard finish to BSEN ISO 1461 hot dipped galvanised 

3 Available in stainless steel 

3 Double doors which can be independently locked 

3 Can be supplied empty or pre-wired with up to 6 230V sockets, 

RCBO protected or to customer’s specifications 

3 Space for DNO supply 

The Dome 


3 Constructed from Grade 304 stainless steel 


3 Pre-wired with up to six 230V sockets, RCBO protected 

3 Sockets mounted in powder coated stainless steel 

modular panel (removable for maintenance) 


3 Flange mounting or root options available 

The Tower 

(Suitable for private supply only) 


3 Constructed from Grade 304 stainless steel 

3 Pre-wired with up to four 230V sockets, RCBO 

protected 

3 Sockets mounted in brushed stainless steel 

modular panel 

3 Flange mounting or root options available 

The Barbican 


3 Constructed from 3mm steel plate 

3 Standard finish to BSEN ISO 1461 hot dipped 

galvanised 

3 Available in stainless steel 


3 Can be supplied empty or pre-wired with up to 4 

230V sockets, RCBO protected 



WORKING 

DEPTH DOOR APERTURE 

Ref H W D R O/AH H W H W 

Smithfield BDP/MT 1270 800 325 300 1570 1150 780 275 500 

500 

Dome DMT400 1250 Dia 406 300 1550 

N/A 540 

Lower 450 x 250 

450 

Tower TMT300 1000 Dia 273 300 1300 N/A N/A 780 260 

Barbican GEM1000 1056 376 326 300 1356 598 

350 

250 

250 

276 500 

250 

695 

695 

260 

260 

268 

268 

| 7 |

Specialist Feeder Pillars 

CEL have built their success on listening to customers, and have designed pillars to suit specific 

applications. 

Folding Pillar (FFP) 

Folding supply pillar providing unobtrusive temporary power supplies (two RCBO protected sockets) 

which only operate in the vertical position offering safe operation in open spaces. When not in use 

the pillar folds away discreetly. 

3 Strong design to withstand foot and vehicle traffic 

3 Options of manufacture in galvanised steel or stainless steel 

3 Pillar is raised, locked upright and opening covered in one smooth operation 

3 Easy to raise and lower, due to maintenance free gas strut - max 20 kilo lift 

3 All electrical parts sealed to IP67 

3 Pillar is isolated in closed (lowered) position 

3 Maximum 300mm planting depth to avoid underground services 

3 Trough for surface dressing allows matching of surrounding area 

Fibre Glass Range (GRP) 

3 Single (GRP320) and Double Door (GRP350) versions 

3 GRP composite to provide max ‘U’ value of 3.0W/m2 Deg C (thermal insulation) 

3 30 minute fire resistance to BS476 Part 22 

3 Self-extinguishing laminate to BS476 Part 7 Class 2 

3 Designed Ingress Protection IP54 

3 2No internal stainless steel, bonded in, hinges per door 

3 2No tri-head locks fitted as standard - other lock options available 

3 Fitted with 10mm external grade and treated ply backboard 

3 Standard external finish smooth gel-coat colour green or grey 

(other RAL or BS colour options available) 

3 Base flange for fixing to prepared concrete base (we strongly recommend a 

‘stepped’ base to ensure integrity of weatherproof seal) 


WORKING 

DEPTH DOOR APERTURE 

Ref H W D H W H W 

GRP320 1290 775 400 740 915 350 960 640 

GRP350 1290 1420 400 1350 915 350 960 1230 

Heritage Pillars 

Any pillar from the BDP and CFP range can be manufactured in the Heritage style, providing a classic 

design for town centre situations. Pillars painted black with gold filigree as standard, but other options 

are available. 

Example Ref: BDP60 in Heritage style = BDP60 Heritage Pillar. 

| 8 |

Feeder Pillar Accessories 

Alternative locks and accessories are available for most pillars in our range: 

Anti-Vandal Locks: 

CLL Lock complete with anti-vandal cap 

CLL Key 

Manufactured from precision die cast components 

Lock insert precision CNC machined using 316 stainless steel 

Can be fitted to BDP pillars as an optional extra 

Yale Lock Can be fitted to Midi and Maxi pillars for added security 

Yale Padlock Can be fitted to Midi and Maxi pillars for added security 

Crown Locks Can be fitted to Mini and Midi pillars as an optional extra 

Hex Locks in place of standard tri-head lock 

Keys: 

Tri-head Key 

Hex Head Key 

CLL Key 

Hasp & Staple Can be fitted to Midi and Maxi pillars for added security to allow fitment of padlock 

Endure Range of Stainless Steel Distribution Boards 

Manufactured from high quality stainless steel – corrosion proof and impact resistant. 


3 Manufactured from high quality brushed stainless steel 

3 Designed for use in harsh environments 

3 Available in 8, 12 or 18 module widths 

3 Designed to maximum cabling space 

3 Tested to IP44 

3 Fitted with tri-head lock 

3 Brass removable gland plate 

3 Ideal for use in pre-wired distribution pillars 

Dimensions (mm): 

Ref Height Width Depth 

SSDB-08 360 180 145 

SSDB-12 360 250 145 

SSDB-18 366 360 145 

Door depth = 37.5 

C-Lock AV body fitted with 

stainless steel insert 

C-Lock cap 

C-Lock key 

| 9 |

Distribution Feeder Pillars to BSEN 60439-1 

CEL pride themselves on the manufacture of quality, safe products which are fit for purpose, and as part of this 

commitment have a dedicated in-house team to design, build and test pre-wired distribution equipment to BSEN 

60439-1, Low Voltage Switchgear and Controlgear Assemblies. The pre-wiring of CEL distribution pillars ensures that 

on-site installation time by the contractor is kept to the absolute minimum. 

It is the responsibility of this team to work very closely both with our own Sales Managers and the end customer, to 

ensure that the final product will meet both the customer’s requirement and be successfully tested and certified to 

BSEN 60439-1. Hence: 

3 Design works together with Fabrication and Assembly 

3 Clear design ensures compliance with standards 

3 Construction must comply with the design 

3 Ensures best assembly methods are used 

3 Manufactured to ISO standards 


3 Free technical support and design service 

3 Certification to BSEN 60439 -1 (peace of mind) 

3 Range of single phase and three phase standard types 

3 Project specific bespoke solutions 

3 Parametric 3D modelling and AutoCAD software 

3 Range of stainless steel distribution boards 

3 Variety of control and protection options available 

3 Experience in designing with variety of OEM equipment, i.e. MEM, Hager 

3 O&M manual issued 

3 Light, heater, thermostat and 13A RCCB socket can be factory fitted 

Electrical Standards of Components 

Fuse switch disconnectors BS EN 60947-3:1999 

Switch disconnectors BS EN 60947-3:1999 

Distribution boards BS EN 60439-3:1991 

Fuse holders BS88-2.2:1988 

Fuse links BS88-2.2:1988 

Miniature circuit breakers BS EN 60898 or BS EN 60947-2:2003 

Contactors BS EN 60947-4-1:2001 

RCCBs BS EN 61008-1:1995 

RCBOs BS EN 61009-1:1995 

Operation & Maintenance Manual 

All pre-wired distribution equipment is supplied with an O&M manual, which consists of: 

Test certificate to BSEN 60439-1 

Instructions including information concerning: 

Installation 

Connection 

Electrical specification 

Incoming fuse data 

Earthing system 

Service condition 

| 10 |

Distribution Feeder Pillars Typical Designs 

CEL are able to design pre-wired equipment using a selection of OEM 

equipment, dependent on client preference and/or suitability for application – 

here are some typical designs using different equipment. 

M11 Junction 11 Pre-wired Lighting Supply Pillar 

Unique Product Reference: PQ4026 

CFP350 Feeder Pillar fitted with modular polycarbonate IP65 enclosures 

SP& N Distribution panel with 14 BS88 fuseways 

Incoming Supply Connection: DNO=< 100A 

Operating Voltage Uo: 230V AC 

Design Current Ib: 100A 

Greenwich Peninsula Riverside South Supply Pillar 

Unique Product Reference PQ2809/FP13 

SP355 Bespoke Pillar fitted with Hager Equipment 

Panel board 8 TP&N Way with 100A 4P switch and 

protection devices 

Incoming Supply Connection: DNO=< 100A 



West Derry Road A287 Crossing 


BDP60 Feeder Pillar fitted with CEL 12 way s/steel dist board 

Pre-wired with double insulated tails 

DNO supply 



High Heavens Recycling Centre, High Wycombe 


CFP590 Feeder Pillar fitted with MEM equipment 

TP&N Fuse Switch Disconnector 

2 x TP&N Distribution Boards 

95A AC3 3P Group Switch Contactor 

Incoming Supply Connection: 120/4C XLPE/PVC/SWA 

Operating Voltage Uo: 400V AC 50 Hz 


| 11 |

Standard Distribution Feeder Pillars 

CEL have developed a range of single and three phase standard Distribution Pillars – these designs have proved to meet the 

requirements of a number of applications in the street lighting industry. 

Single Phase Distribution Pillars 

| 12 | 

Product Code Feeder Pillar 

Standard SP&N pre-wired supply feeder pillars - 2 to 12 outgoing BS88 fuse ways 

External 

dimensions 

H x W x D (mm) 

All have 300mm 

planted root 

Outgoing 

Ways 

Protection devices 

Maximum cable 

terminations 

(mm 2 ) 

Available gland 

plate space X/Y 

(mm) 

CEL/TYPE/R602 BDP70 950 x 450 x 250 2 Fuses BS88 =< 32A 16/3C - 25/2C 110 x 70 





CEL/TYPE/R612 

Common Features 

BDP90 1150 x 650 x 300 12 Fuses BS88 =< 32A 16/3C - 25/2C 270 x 70 

Incoming supply Uo 230V AC 50Hz 

Design current Ib 100A 

Space for DNO cut-out & meter SP&N =< 100A Yes 

Pre-wired tails L/N 25mm2 Main earth CPC E 16mm2 Fully earth bonded Yes 

Distribution panel Charles Endirect SSDB range in stainless steel 

Main switch 100A 2P switch disconnector 

Outgoing circuits 24 hour supplies (not group switched) 

Wiring standard BS 7671 

Test and certified BSEN 60439-1 

O&M pack with test certificate Supplied in plastic document holder fitted within the pillar 

Alternative incoming supply connection Private cable = < 25mm2 2 or 3 core SWA (by others) 

Option kit Thermostat and compact 60 watt heater (sub assembly item SA/66)

Standard Distribution Feeder Pillars 

Three Phase Distribution Pillars 

Product Code Feeder Pillar 

Standard TP&N pre-wired supply feeder pillars - 6 to 8 outgoing BS88 fuse ways 

External 

dimensions 

H x W x D (mm) 

All have 300mm 

planted root 

Outgoing 

Ways 

Protection devices 

Maximum cable 

terminations (mm 2 ) 

CEL/TYPE/R600GS CFP572 1600 x 1500 x 450 6 Fuses BS88 =< 32A 35/4C 

CEL/TYPE/R60024 CFP572 1600 x 1500 x 450 6 Fuses BS88 =< 32A 35/4C 

CEL/TYPE/R800GS CFP572 1600 x 1500 x 450 8 Fuses BS88 =< 32A 35/4C 

CEL/TYPE/R80024 CFP572 1600 x 1500 x 450 8 Fuses BS88 =< 32A 35/4C 

Common Features 

Incoming supply Uo 400V AC 3PH 50Hz 

Design current Ib 100A 

Space for DNO cut-out & meter SP&N =< 100A Yes 

Pre-wired tails L/N 25mm2 Main earth CPC E 16mm2 Fully earth bonded Yes 

Distribution panel Industrial grade metal clad 

Main switch 100A 2P switch disconnector 

Outgoing circuits 24 = 24 hour supplies GS = Group Switched 

Wiring standard BS 7671 

Test and certified BSEN 60439-1 

O&M pack with test certificate Supplied in plastic document holder fitted within the pillar 

Alternative incoming supply connection Private cable = < 25mm2 2 or 3 core SWA (by others) 

Option kit Thermostat and compact 60 watt heater (sub assembly item SA/66) 

| 13 |

Project Specific Bespoke Solutions 

CEL also offer a design service, working with the client from the conception of a project to 

delivery. 

Everybody in the Supply Chain has a responsibility to ensure that the product is safe, from the 

specifier, to CEL as the manufacturer, to the installer. 

All CEL distribution equipment is designed, manufactured and tested to BSEN 60439-1. A 

design is prepared under instruction from the Specifier who receives a CAD drawing giving 

details of layout, together with a unique reference which can be used in the 

specification documentation. 

When a project comes to construction phase, Design and Assembly work closely together to 

ensure build complies with the design. Quality systems under ISO 9001:2008 are followed 

throughout the manufacture. 

On completion, all distribution equipment is tested using calibrated instruments, with the 

results being recorded. All assemblies are inspected both mechanically and electrically. 

Electrical continuity of the protective circuits is checked. 

A Certificate of Type Test is produced and included in the O&M Manual supplied with the 

product. 

To provide full traceability, all completed distribution 

pillars are supplied complete with a name plate 

affixed showing: 

3 Identity number 

3 Standard 

3 Rated Operational Voltage Ue 

3 Rated Insulation Voltage Ui 

3 Degree of Protection 

3 Date of Manufacture 

|14 |

Case Study 

Riverside Resource Recovery Facility 

Location: South Bank of River Thames, Belvedere 

The RRR Facility is an energy recovery plant planned as an alternative to a 

landfill site. The facility is a river-served recovery plant with waste delivered 

by barges and tugs. The plant generates its own power and exports power to 

the National Grid. 

Specification: A bespoke feeder pillar, with a footprint of 

2800mm x 900mm, consisting of two standard feeder cubicles in a ‘back to 

back’ arrangement to service the following: 

General Power 

Sub Mains Circuit 

Low voltage 110V centre tapped earth socket outlets/connection units 

General area lighting and floodlighting 

Jetty Navigational Lighting and Emergency Lighting 

The pillar was to be sited on a jetty. Therefore it was recommended that 

it be fabricated in 5mm 316 grade stainless steel to suit the marine 

environment. Electrical distribution panels to be in modular polycarbonate, 

IP65 enclosures, with the following general specification: 

Material: Thermoplastic 

Application Areas: Harsh Environments/Outdoor Use 

Ambient Conditions: -5o C to +40o C 

Insulation: Protection Class II 

Impact Strength: IK 08 (5 Joule) to DIN EN 50 102 

Ingress Protection: IP65 – Dust Proof & Water Jets 

Electrical Parameters: Rated Current 630A Insulation Voltage AC/DC 690 

Burning Behaviour: Glow Wire Test 960o C to IEC 60 695-2-1 

Temperature Resistance: -40°C up to +120°C 

UV Resistance: Direct Sun Radiation 

Chemical Resistance: Acid & Lye 10%, Petrol & Mineral Oil 

Toxic Behaviour: Silicon & Halogen Free 

Design: After much discussion between CEL Designer and Consultant, a 

design was agreed, a unique product reference, PQ2909, allocated and 

outline drawings prepared and submitted to the client. The job subsequently 

went out to tender and prices were submitted by contractors. 

Manufacture: Once the formal order was received, detailed circuit 

diagrams were prepared and submitted for approval. Several design 

changes occurred as the project progressed and once final design was 

approved, fabrication of the pillar and assembly of the electrical equipment 

began. 

Testing: Carried out to BSEN 60439-1. Because of the very special 

requirements for this project the customer sent a representative to witness 

the test. 

Delivery: Due to the nature of the site and the product, a specific delivery 

date and time was arranged. 

For further information please contact 

our Customer Services Team 

Riverside Resource Facility 

Product Ref: PQ2909 

| 15 |

Charles Endirect Ltd is a market 

leader in the street lighting industry. 

The company’s innovative product 

range includes: 

ISOLATORS & CUT-OUTS 

LSI Range 

Festive Lighting 

Helix Range 

Extension Boxes & Gland Plates 

FEEDER & DISTRIBUTION PILLARS 

Mini Pillars 

Midi Pillars 

Maxi Pillars 

Stainless Steel Pillars 

Specialised Architectural Pillars 

Pre-wired Distribution 

BELISHA EQUIPMENT 

Gallery 

Light Sources 

Globes 

Accessories 

ENERGY SAVING 

Power Switches 

Gear Trays 

Electronic Ballasts 

Control Gear 

Energy Management System 

LEDs 

EARTHING 

Cable Glands 

CETs 

Accessories 

MISCELLANEOUS 

Passive Safety 

Fuses 

Surge Protection 

Emergency Doors 

Strimmex 

4090 

T +44 (0)1963 828400 

F +44 (0)1963 828401 

E info@charlesendirect.com 

www.charlesendirect.com 

Wessex Way 

Wincanton Business Park 

Wincanton 

Somerset BA9 9RR 

Charles Endirect Ltd operates a policy of continuous product development and improvement. 

The facts and information offered in this document are correct at the time of going to press. 

©2010 Charles Endirect Ltd

CEL | Feeder Pillars | Distribution Pillars - Charles Endirect Ltd

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?