You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>ADDAPT</strong> ® <strong>Ferrocor</strong> <strong>Flash</strong><strong>Corrosion</strong> <strong>Inhibitor</strong>Typical chemical andphysical properties<strong>Ferrocor</strong> <strong>Flash</strong> is a water soluble corrosion inhibitor for Ferrous and Zinc richsubstrates.It is a proprietary blend of Phosphate salts and Phosphonoxy esters.All constituents are EINECS registered and comply with the FDA regulation(incidental contact with foodstuff).AppearanceTurbid liquidDensity 1,22 – 1,30 g/cm 3Viscosity at 20 ºCSolubilityWater< 100 mPa.s (Brookfield #1, 50rpm)SolublepH 4 – 7Biodegradability Biodegradable (OECD 301 D)Applications and Emulsion paints and lacquers 0.5 to 1.5% wt. based.typical treat levelrecommendedTextile fluidsBenefitsOffers excellent solubility in water based systemsVery effective ferrous corrosion inhibitor; excellent salt spray results can beachieved in primers.Inhibits metal weight loss when steel is immersed in the aqueous systemcontaining <strong>ADDAPT</strong> ® <strong>Ferrocor</strong> <strong>Flash</strong>.Excellent passivator for yellow metals (Copper, etc.)Excellent inhibitor for Zinc and Zinc rich surfaces.Prohibits colour fading in pigments based on metal salts (i.e. Vanadium andBismuth salts like Pigment Yellow 104 and 106)Its use is not restricted by the water hardness.CautionStore in the original closed DARK containers at ambient temperatures.Avoid exposure to extreme temperatures
<strong>ADDAPT</strong> ® <strong>Ferrocor</strong> <strong>Flash</strong>Safety and HandlingPlease read Material Safety Data Sheet (MSDS) before handling.Product SpecificationThis information is available on request through our local representative.PackagingThis information is available on request through our local representative.Quality PolicyThe objective of our quality policy is the continuous fulfillment of the internaland external requirements agreed upon with our partners with regards toeverybody’s performance.The Quality System of ADD APT ® Chemicals BV is based on the principles ofthe NEN-EN-ISO-Standard 9001: 2008.LiabilitiesAll recommendations for the use of our products, whether given by us inwriting, orally, or to be implied from the results of tests carried out by us, arebased on the current state of our knowledge. Notwithstanding any suchrecommendations, buyer or user remains responsible for satisfying himselfthat the products as supplied by us are suitable for his intended process orpurpose. Since we cannot control the application, use or processing of theproducts, we cannot accept responsibility thereof. Buyer has to ensure thatthe intended use of the products will not infringe any third party’s intellectualproperty rights. We warrant that our products are free from defects inaccordance with, and subject to, our general conditions of sale and supply.<strong>ADDAPT</strong> Chemicals BVPublication Number FC03-<strong>Flash</strong>Achterdijk 13 d/e © <strong>ADDAPT</strong> Chemicals BV 2004NL-5705 CB Helmond Version 3 : 2012The NetherlandsTel: + 31 - 492 - 59 - 75 - 75Fax: + 31 - 492 - 55 - 29 - 55E-mail: info@addapt-chem.comHome page: http://www.addapt-chem.com<strong>ADDAPT</strong> ® <strong>Ferrocor</strong> <strong>Flash</strong> 2
Change language