Floor Polish Concentrate

ADDAPT ® FPC 500Floor PolishConcentrateTypical chemical and ADDAPT ® FPC 500 is a modified fine particle size emulsion, based on Acrylatephysical propertiescopolymers. The product contains Zinc, Polyethylene, Film forming- and Foam Controlagents; it is slip resistant.The emulsion is based on Acrylate copolymers.AppearanceMilky liquidSolid content 30 ± 1% (DIN 53189)Viscosity at 23 ºC max. 100 mPa.s (ISO 2555 -1989)(Brookfield RVT; @20; #2)Surfactant systemanionic/non-ionicpH 8.5 ± 0,5 (DIN 53785)Density at 20 ºC 1,03 g/cm 3 (DIN 53217)MFT ca. 0 ºC (DIN 53787)Freeze/Thaw Stability5 CyclesApplications and - Polishes for I & I Applications To obtain a 20% Polish, dilutetypical treat level2 parts FPC 500 with 1 part water.recommendedApplication of 2-3 layers result in aslip- and traffic resistant film.- Polishes for Domestic Applications An excellent Polish is obtained whendiluting FPC 500 1:1 with Water.For Wash & Wax application it isrecommended to add additionalSurfactants.- Buffable Polishes are obtained when combiningFPC 500 with a Wax emulsion.Increasing amounts of Wax emulsionsresult in soft(er), buffable polishes.The following formulation is highlyrecommended:66 % Water, de-ionised18 % ADDAPT ® WaxMul WM 12016 % ADDAPT ® FPC 500- Stone care Polishes addition of ADDAPT ® BioWet 75 isrecommended.55 % Water, de-ionised.40 % ADDAPT ® FPC 5005 % ADDAPT ® BioWet 75BenefitsADDAPT FPC 500 is recommended for both I & I and Domestic applications as aHard Floor Care product (cleaning and maintenance) for a wide variety of surfaces,with the exception of untreated wooden floors.No ‘Safety and Risk’ labelling necessary

ADDAPT ® FPC 500Safety and HandlingPlease read Material Safety Data Sheet (MSDS) before handling.Product SpecificationThis information is available on request through our local representative.PackagingThis information is available on request through our local representative.Quality PolicyThe objective of our quality policy is the continuous fulfillment of the internaland external requirements agreed upon with our partners with regards toeverybody’s performance.The Quality System of ADDAPT ® Chemicals BV is based on the principlesof the NEN-EN-ISO-Standard 9001: 2008.LiabilitiesAll recommendations for the use of our products, whether given by us inwriting, orally, or to be implied from the results of tests carried out by us, arebased on the current state of our knowledge. Notwithstanding any suchrecommendations, buyer or user remains responsible for satisfying himselfthat the products as supplied by us are suitable for his intended process orpurpose. Since we cannot control the application, use or processing of theproducts, we cannot accept responsibility thereof. Buyer has to ensure thatthe intended use of the products will not infringe any third party’s intellectualproperty rights. We warrant that our products are free from defects inaccordance with, and subject to, our general conditions of sale and supply.ADDAPT Chemicals BVPublication Number FPC99-500Achterdijk 13 d/e © ADDAPT Chemicals BV 2003NL-5705 CB Helmond version 2 : 2012The NetherlandsTel: + 31 - 492 - 59 - 75 - 75Fax: + 31 - 492 - 55 - 29 - 55E-mail: info@addapt-chem.comHome page: http://www.addapt-chem.comADDAPT ® FPC 500 2