Automotive - DC Hydraulics.com

Automotive productsHTJ1200 - UNIVERSAL LIFTING SYSTEMThe modular construction methods now used in the automotive industryare placing new demands on workshop equipment. Vehicle parts such asmotor blocks or rear axles have to be dismantled and mounted from below.With the HTJ1200 system, these heavy lifts can be done in a effectiveand controlled way.The system is suitable for removing and fitting complete engine assemblies,rear axles, gearboxes, fuel tanks,exhaust systems and much more. Withits lifting capacity of almost 550 kg, theHTJ1200 universal handling system comeswith enough power for all kinds of jobs• It saves time & moneyWork can be carried out by one personinstead of several. Furthermore, additionalrepair jobs can be carried out directly onthe working platform. Therefore, the systemreduces the total working time for completerepairs.Lifting is done pneumatically and hydraulically.With pneumatics the load can beraised or lowered quickly. The hydrauliclifting gives the operator higher control andprecision of the lifting procedure.REHOBOT’s universal handling system is patented. The system is designedto meet today’s and tomorrow’s needs. Modification meeting the requirementsof your car model may be supplied upon request,Technical dataNameHTJ1200-2 UniversalCapacity545 kgHeight min./max. 755 mm/1700 mmPneumatic stroke 472 mmHydraulic stroke 473 mmReq. air pressure 0.8 MPa (8 bar)Length1050 mmWidth1050 mmWeight76 kgPlease contact REHOBOT to obtain item number inconjuction with your order of the HTJ-1200 system.We offer a wide selection of interface mechanics andkits adopting the HTJ to your type of vehicle model.SECRETS OF THE HTJ - SYSTEMThe reason why the HTJ1200-system is so useful is due to themodular & robust design of the system.Adaptors enables the same base unit of the HTJ to be used foreach car model. Therefore the same base unit may be usedindependent of the car model and manufacturer. Thus creatinga real generic lifting system!9