产 品 规 格 书 SPECIFICATION
产品规格书 SPECIFICATION - 无锡市好达电子有限公司
产品规格书 SPECIFICATION - 无锡市好达电子有限公司
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>规</strong> <strong>格</strong> <strong>书</strong> 编 号SPEC NO :<strong>产</strong> <strong>品</strong> <strong>规</strong> <strong>格</strong> <strong>书</strong><strong>SPECIFICATION</strong>CUSTOMER 客 户 :PRODUCT <strong>产</strong> <strong>品</strong> :MODEL NO 型 号 :MARKING 印 字 :SAW FILTERHDF429.42A SMD-6HDF640MPREPARED 编 制 : CHECKED 审 核 :APPROVED 批 准 : D A T E 日 期 : 2011-8-31客 户 确 认 CUSTOMER RECEIVED:审 核 CHECKED 批 准 APPROVED 日 期 DATE无 锡 市 好 达 电 子 有 限 公 司Shoulder Electronics Limitedwww.shoulder.cn Tel:0755-82916880 Fax:0755-82916881 E-mail:info@shoulder.cn Page 1 of 8
SAW FILTERHDF429.42A SMD-6更 改 历 史 记 录History Record更 改 日 期Date<strong>规</strong> <strong>格</strong> <strong>书</strong> 编 号Spec. No.<strong>产</strong> <strong>品</strong> 型 号Part No.客 户 <strong>产</strong> <strong>品</strong> 型 号Customer No.更 改 内 容 描 述Modify Content备 注Remarkwww.shoulder.cn Tel:0755-82916880 Fax:0755-82916881 E-mail:info@shoulder.cn Page 2 of 8
SAW FILTERHDF429.42A SMD-61. SCOPEThis specification shall cover the characteristics of SAW filter With HDF429.42A used for thepage system.2. ELECTRICAL <strong>SPECIFICATION</strong>DC Voltage VDC10VAC Voltage Vpp10V50Hz/60HzOperation temperature -30℃ to +95℃Storage temperature -45℃ to +95℃Max RF Power Level10dBmElectronic Characteristics2-1.Typical frequency responsewww.shoulder.cn Tel:0755-82916880 Fax:0755-82916881 E-mail:info@shoulder.cn Page 3 of 8
SAW FILTERHDF429.42A SMD-62-2.Electrical characteristicsUnit Minimum Typical MaximumCenter Frequency MHz - 429.42 -Insertion Loss (In Fc +/-0.5 MHz) dB 2.0 3.5Amplitude Ripple (In Fc +/- 0.5MHz) dB 0.5 1.5VSWR (In Fc +/-0.5 MHz) 1.5 2.5Relative Attenuation10 MHz ~410 MHzdB 40 50 -450 MHz~ 1000MHz40 50Input/Output Impedance Ohms 503. TEST CIRCUIT4. DIMENSIONwww.shoulder.cn Tel:0755-82916880 Fax:0755-82916881 E-mail:info@shoulder.cn Page 4 of 8
SAW FILTERHDF429.42A SMD-6Marking:HDF640MHD: BrandF: Filter6: SMD-640M: No.5. ENVIRONMENTAL CHARACTERISTICS5-1 High temperature exposureSubject the device to +85℃ for 16 hours. Then release the filter into the room conditionsfor 24 hours prior to the measurement. It shall fulfill the specifications in 2-2.5-2 Low temperature exposureSubject the device to -40℃ for 16 hours. Then release the device into the room conditionsfor 24 hours prior to the measurement. It shall fulfill the specifications in 2-2.5-3 Temperature cyclingSubject the device to a low temperature of -40℃ for 30 minutes. Following by a hightemperature of +85℃ for 30 Minutes. Then release the device into the room conditionsfor 24 hours prior to the measurement. It shall meet the specifications in 2-2.5-4 Resistance to solder heatDip the device terminals no closer than 1.5mm into the solder bath at 260℃ ±10℃ for10±1 sec. Then release the device into the room conditions for 4 hours. The device shallmeet the specifications in 2-2.5-5 SolderabilitySubject the device terminals into the solder bath at 245℃ ±5℃ for 5s, More than 95%area of the terminals must be covered with new solder. It shall meet the specifications in2-2.5-6 Mechanical shockDrop the device randomly onto the concrete floor from the height of 1m 3 times. the deviceshall fulfill the specifications in 2-2.5-7 VibrationSubject the device to the vibration for 1 hour each in x,y and z axes with the amplitude of1.5 mm at 10 to 55 Hz. The device shall fulfill the specifications in 2-2.6. REMARK6.1 Static voltageStatic voltage between signal load & ground may cause deterioration &destruction ofthe component. Please avoid static voltage.6.2 Ultrasonic cleaningUltrasonic vibration may cause deterioration & destruction of the component. Pleaseavoid ultrasonic cleaningwww.shoulder.cn Tel:0755-82916880 Fax:0755-82916881 E-mail:info@shoulder.cn Page 5 of 8
Change language