KEP Counters & TimersKAL-D06 8 Digit Electronic Counter• Low speed input for contactclosures• High speed input sinks 18V max• Optional quadrature & highvoltage inputs• 10 year lithium battery –no external power needed• NEMA 4X (IP65) front• UL recognizedDisplay:Readout:Reset:Backlight:Hi-speed Input:Lo-speed Input:Quadrature Input:Reset Input:Direction Input:Hi-voltage Input:Hi-voltage Reset:Temperature:Case:SPECIFICATIONSLCD, digits 0.35" (9mm) high8 digits with leading zero blankingPanel or external (can be disabled)Requires external 5V supply (20 mA)NPN sink; 18V, 10kHz maxNPN sink or contact closure; 18V, 30Hz maxNPN sink or push pull, 18V, 2.5kHz max>15ms NPN sink or contact closure; 18V maxNPN sink or contact closure; 18V max (Lo=down)Count 10 pulses/sec max; opto-isolated 250VAC/120VDC max>15ms, opto-isolated 250VAC/120VDC max-10 to 60°C operating24 x 48 x 52 mmDIGITALMETERSKAL-DTIME 8 Digit Electronic Timer• Electronic or contact closure input• Powered by 10 yearlithium battery• High voltage inputoptional• NEMA 4X (IP65) front• UL ListedDisplay:Readout:Reset:Backlight:Timing Input:Reset Input:Direction Input:Hi-voltage Input:Hi-voltage Reset:Temperature:Case:SPECIFICATIONSLCD, digits 0.35" (9mm) high8 digits with leading zero blankingSECONDS: 99999999MINUTES and SECONDS: 99999-59HOURS and 1/100ths: 99999-99HOURS and MINUTES: 99999-59Panel or external (can be disabled)Requires external 5V supply (20 mA)NPN sink, negative edge trigger; 18V max>15ms NPN sink or contact closure; 18V maxNPN sink or contact closure; 18V max (Lo=down)Opto-isolated 250VAC/120VDC max>15ms, opto-isolated 250VAC/120VDC max-10 to 60°C operating24 x 48 x 52 mm924K Counter, Rate Meter & Timer• Displays actual value,presets, batch countor total count• 3 predefined parametersettings• Tracking presets• 4 stage RESET modes• 2 relay outputs• 3 stage key lockoutSPECIFICATIONSDisplay:2 line, 6 digit red LCDCount Inputs: NPN/PNP, 5kΩ, 55 kHz maxSwitching Level: Low=0-4 VDC, High=12-30 VDC (924KA)Count ModesPulse: cnt.dir, up.dn, up.up, quad, quad 2, quad 4,A/B, (A-B)/A x 100%Frequency: A, A-B, A+B, quad, A/B, (A-B)/A x 100%Timer:FrErun, Auto, InpA.InpB., InpB.InpB.Monitor/Reset Inputs: MPI, lock, gate, resetPulse Duration: 10 ms/1 ms min.Relay 1:Form A, programmable NO or NCRelay 2:Form CMax. Switching: 250 VAC / 110 VDC, 3 A, 750 VA / 90 WSensor Supply: 24 VDC, 80mATemperature:-20 to +65 °C operatingProtection:IP65 (front)Case:1/8 DIN (48 x 48 x 107mm)KAL-D06KAL-DQUAD06KAL-D06AC/DC8 digit counter with 10 yr battery8 digit counter with 10 yr battery& Quadrature Input8 digit counter with 10 yr battery& High Voltage InputORDERING INFORMATIONKAL-DTIMEKAL-DTIMEAC/DC924KA*924KB*8 digit timer with 10 yr battery8 digit timer with 10 yr battery& High Voltage InputCounter, Rate, Timer; 90-260 VAC powerCounter, Rate, Timer; 10-30 VDC power*Add suffix 0 for relay outputs, 1 for opto-coupler outputs42
KEP Counter/TimerLCD preset add/subtract counter,timer, frequency meter903K/904K Series• 6-Digit Counter, Timer orFrequency Meter• 2 Preset Values(Type 903K 1 Preset)• Input Scaling(0.0001 to 9.9999) Multiplier• 2-Line LCD Display• Count and Preset Rangeof -999999 to 999999• Add or Subtract Count Control• AC or DC Operation• Secondary Preset Batch Counter (904K)• 24 VDC to Power PeripheralsDisplay:Preset:Supply voltage:Housing:Protection:Power Supply:ORDERING INFORMATIONTo Order—Insert Number Code for Each Letter to Select Catalog NumberOrder Example: 904K-A-0-AA – B – C – DABCDBasic Unit903K Single Output904K Dual OutputsInput VoltageA 115 VACB 230 VACC 11 to 30 VDCD 24 VACE 48 VACOutputs0 Relay1 Opto-Isolated collector and emitterOptions— Blank if NoneA Backlit LCD Display (904K only)▲ 904KSPECIFICATIONS6-digit, 2-line, 7 segment LCD with signType 904 two preset valuesType 903 one preset value115 VAC, 230 VAC, 48 VAC or 24 VAC(tolerance ± 10%) or 11 to 30 VDC48 x 48 mm DINIP 65 (front)24 VDC, 80 mAKEP Totalizer/Rate MeterRatemeter/totalizer/processmonitor from analog inputs▲ INT69RTIntellect-69 Series• High/Low Scaling from Front Panel• 2 Set Points Assignable To Rate or Total• Display Rate (Pressure, Level, Watts, Etc.),Peak and Valley and Integrated Total• 0–5V, 0–10V, 1–5V, 4–20 mA or 0–20 mA Analog Input• NEMA 4X/IP 65 Front Panel• +24V Output for Peripherals• RS-422/RS-232 Serial Communications• 4–20 mA Output• Square Root Extraction• Optional Rate Per Day FeatureORDERING INFORMATIONTo Order—Insert Number Code for Each Letter to Select Catalog Number.Order Example: INT69RT-A-L-1-A-C1A – B – C – D – EABCDEBasic UnitINT69RT Ratemeter/TotalizerINT69R Ratemeter OnlyINT69PM2 Process MonitorDisplays from -19999 to +49999INT69T Totalizer OnlyOperating VoltageA110 VAC ±15% or 12 to 24 VDCB220 VAC ±15% or 12 to 24 VDCInputs— Blank for INT69PM2LLinear (standard)SSquare Law (optional)Control Outputs1 2-Open Collector Outputs (standard)2 2–10 Amp Form C Relays (optional)Options (Multiple Options Available)AAnalog Output (4–20 mA)DRate per Day, Hour or MinuteC1RS-232 communicationsC2RS-422 communications42a