WORKING CATALOGUE 2008

DESIGNED BY F.A.PORSCHEBATTERY TRIM / BATTERY NO TRIMDESCRIPTION1, 2, 3 or 4 lamp adjustable- system, forrecessed ceiling thicknesses of 1-30mm.Suitable for use with 12 volts, main voltage andmetal halide lamps which can be used in avariety of combinations.Pressed steel and matt black, powder-coatedrecessed housing, extruded aluminum recessedtrim frame for use with false ceiling systems.(Battery No Trim).Steel “compass-type” adjustment mechanism,powder-coated matt black. Innovative steelbracket fixing system, painted black, with allenkey locking mechanism. Die-cast aluminumknurled rings housed in a 3mm steel frame.Terminal block positioned on canopy housingbox.Halogen: additional high-resistance PPS innerring, for mounting lamp and anti-glarefunctions.Discharge: die-cast aluminum alloy heat sinkpositioned above the lamp support, 3mmtempered glass cover.Finishes: matt white (20), mercury (08),matt black (14).REFLECTORSSuper-pure, anodised-aluminum, silverreflectors with polished specular finish.LAMPSHalogen:- QR-CBC 51, GX5,3 lamp holder, 50W (beamangles: 10° - 24° - 38° - 60°)- QR-70, BA15d lamp holder, 50W (beamangles: 8° - 24°)- QT-12, GY6,35 lamp holder, 100W max (beamangles: 6° - 9° - 26°)- QR-111, G53 lamp holder, 100W (beamangles: 4° - 8° - 24° - 45°)- PAR 30S, E27 lamp holder, 75W (beam angles:10° - 30°).Discharge:- HIT-CRI, G12 lamp holder, 35W/70W (beamangles: 12°-25°)- CDM-TC, lamp holder G8,5, 35W/70W (beamangles: 14°-36°)- PAR 30 CDM-R, lamp holder E27, 35W/70W(beam angles: 10° - 30°).POWER SUPPLYPre-wiring included; ready for remote powersupply.Wieland connectors used for discharge controlgear providing quick installation time.ACCESSORIES- screening cylinder with cross baffle elementincorporated, black powder-coated finish- anti-glare screen with aluminum honeycombcells, black-painted finish- colored filters (blue – sky blue – amber – red)- anti-UV filter- anti-IR filter- 4mm tempered glass elliptical distribution lens- hot light filter- cold light filter- daylight filter- neodinium filter- frame needed for installation on false ceiling.(Battery No Trim).- electronic transformer 20/105W, 220/240V,50/60Hz suitable for dimming when used withtrailing edge dimmers- traditional low-loss power supply for metalhalide lamps, 35/70W, 220/240V, 50/60Hz- next-generation electronic power supply formetal halide lamps, 35/70W, 220/240V,50/60Hz.ADDITIONAL INFORMATIONCompass-type adjustment system permitsfocusing from 0º to 40º in all directions.Class I, II, III insulation, depending on theversions.IP23 protection.STANDARD COMPLIANCEAND QUALITY MARKSEN60598-1 European Technical Standards andany subsequent additions; ENEC ElectricalSafety Mark.BATTERY NO TRIM BATTERYCOLOURSCOLORI20 MATT WHITEBIANCO OPACOROTATION FEATURESORIENTAMENTO40º08 MERCURYMERCURIOMIXING LAMPSLAMPADE DI MISCELAZIONECan be rotated 40˚in any direction.All models of Batterydischarge serie canbe matched with theaccent lamp QR-111.14 MATT BLACKNERO OPACOPuò essere ruotatodi 40˚ in qualsiasisenso.Tutti i modelli dellaserie Battery perlampadine a scaricapossono esserecombinati con lelampadine di accentoQR-111.252328TRANSFORMERSTRASFORMATORI