WORKING CATALOGUE 2008

DESIGNED BY ANTONIO CITTERIO AND OLIVER LÖWU-BEAM CONNECTDESCRIPTIONSuspension luminaire using steel wires(L=4000mm) with die-cast aluminum, easyadjustmentceiling fittings. For linearfluorescent lamps, standard or dimmable. Oneor more units can be joined and wired together.Available in three versions:- “Indirect” for indirect lighting only;- “Comfort” for direct (64%) and indirect (36%)lighting;- “High Comfort” for direct (44%) and indirect(56%) lighting or only for direct lighting bymeans of a special accessory provided with theluminaire for total screening of indirect light.The last version is ideal for installation inworkplaces where visual display terminals areused.Powder-coated extruded aluminum body. Handpolishedaluminum end caps protected with atransparent liquid coat of paint. Cut/floded andgalvanized steel structural parts.Electromechanical head connection that has twofeed-through electric lines with a quickconnectingelectromechanical joint in V1polycarbonate.Finishes: white (09), grey (20), polishedaluminium (50).REFLECTORS- Indirect lighting:Super-pure aluminum with specular finish.- Comfort:Aluminum with light satin finish.- High Comfort:Super-pure aluminum with specular finish(Mirò II).LAMPST5 fluorescent tubes, FH/FQ (diameter 16mm),G5 lamp-holder; in the following powerversions:Indirect: 2x28W; 2x35W; 2x54W; 2x80W.Comfort and High Comfort: 2x28W; 2x35W.POWER SUPPLY1 or 2 next-generation electronic power supplyunits, standard or dimmable (digital), included.ACCESSORIES- 21mm polished aluminum end cap, with4000mm wire- Pair of 21mm polished aluminum end caps,with 4000mm wire- 21mm wired linear joint, with 4000mm wire- 250mm wired L-, T-, cross-joints, with400mm wires- Die-cast aluminum power supply rosette with:- 1-line three-pole cord;- four-pole cord for dual on-off switching ordimming.ADDITIONAL INFORMATIONAll luminaires to be completed with powersupply rosette and end caps.Emergency versions for “Comfort” and “HighComfort”.IP20 protection.Class I insulation.Suitable for installation on normally inflammablesurfaces.STANDARD COMPLIANCEAND QUALITY MARKSEN60598-1 European Technical Standards andany subsequent additions; ENEC ElectricalSafety Mark.COLOURSCOLORI09 WHITEBIANCO20 GREYGRIGIO50 POLISHEDALLUMINIUMALLUMINIOLUCIDO038