Tech Data Sheet Template - Loctite® Equipment

Equipment Update BulletinDate: August 23, 2010Subject: “F” style Static Mix Nozzles for 490 ml Adhesives in “F” StyleCartridgesScope and Purpose: This is intended to provide helpful hints for the 10:1 ratio static mix nozzles that are usedwith Adhesives that are packaged in 490 ml. dual cartridges.Question: Which static mix nozzle is to be used with “F” Style adhesives in 490ml cartridges?Answer: The adhesives that are packaged in an “F” style 490 ml dual cartridge and require an “F” style static mixnozzle as shown here. The new "F" style cartridge design incorporates a stronger attachment flange and separatecylinders to allow for higher dispensing pressures. See next page for details on cartridge. An interface with separatedoutlets between cartridge and static mix nozzle eliminates the possibility of cross contamination and avoids pluggedcartridges.This nozzle has a stepped end that can be cut off as required to increase the tip opening diameter and is available intwo lengths (9.1 inches / 8 mm diameter and 11.2 inches / 10 mm diameter).Item # 1084255 490 ml Mix Nozzle (10) pack Stepped Tip 9.1 inch Overall Length 8 mm diameter 24 elements 10:1 mix ratio, for F style cartridges. Need larger quantities? See item # 1076341; same item in (1200) packItem # 1084092 490 ml Mix Nozzle (10) pack Stepped Tip 11.2 inch Overall Length 10 mm diameter 24 elements 10:1 mix ratio, for F style cartridges. Need larger quantities? See item # 1084093. Same item packaged in (900) packs.1NOT FOR PRODUCT SPECIFICATIONSLoctite is a TM of Henkel Corporation, U.S.A. © Copyright 2010. Henkel Corporation. All rights reserved

Equipment Update BulletinDate: August 23, 2010Adhesive Package clarification photos:Example of a 490 ml 10:1 adhesive cartridge that accepts the “F” style static mix nozzles.2NOT FOR PRODUCT SPECIFICATIONSLoctite is a TM of Henkel Corporation, U.S.A. © Copyright 2010. Henkel Corporation. All rights reserved