thirteen

More documents

Recommendations

Info

JIC 2008 CERAMIC FIBER ROPE Ceramic Fiber rope (with or without wire) : 1. Ceramic fiber round braided rope 2. Ceramic fiber twisted rope (yam) 3. Ceramic fiber square braided rope 4. Ceramic fiber twisted rope (wicker) Technical Characteristics : • Excellent high temperature stability • Excellent tensile strength • Excellent thermal electrical insulation • Excellent chemical stability resistance • Low thermal conductivity Application : • Insulation of-high-temperature tube, container, etc. • The seal of the door of industrial furnace • The protection of cable, fuel tube, etc. • Fireproof twine, wrap, cover, etc. • Compound material produce. Properties : • Temperature : 600 0 C • Density : 400-600 kg/m3 • Organic content :
JIC 900 ROCKWOOL BLANKET Rockwool product are made from silica oxida, aluminium oxide, calsium monoxida and others. This assures that all rockwool have good temperature resistance, outstanding thermal stability, and good resistance to devitrification. These product is an ideal insulation material and suitable for acoustic absorption effects. Technical Characteristics : 1. Small thermal conductivity and good performance of insulation The fiber of rockwool is fine and flexible. The fiber is well distributed, thermal conductivity is between 0.039 and 0.043 W/m.k. Rock wool is an ideal insulation material to reach excellent result of energy saving. 2. Fire resistance This product is accredited as a non-combustable material by tested to ASME E-136. The Rockwool product are based on stone wool, which cannot burn and which can stand temperatures up to 650 degrees C. Rockwool stone the best guarantee for an effective fire protection. 3. Sound Insulation Rock wool products are usually used for sound absorption in wall of building. 4. Moisture absorption These product are water-repellent, non-hygroscopic. Rockwool absorbs very little water from the air. For example, at relative humidity of 90 per cent the hygroscopic water content in rockwool is only approx. 0.004 per cent by volume, which is totally unimportant in practice. 5. Corrosion resistance As rockwool is made from practically non-alkaline materials, it does not react chemically and therefore does not support corrosion. 6. Chemical Properties / Biological properties Mineral wool is neutral (PH 7) or slightly alkaline and meet the requirement of standard ASTM C 795 JIS A 9504. It will not normally support the growth of molds, fungi and bacteria. Product Description These product are relatively flexible, lightweight mats. Application Normal type among blankets, which is suitable for big diameter pipelines, boilers, vessels, flat and irregular surface, building walls with good thermal and accoustic absorption effects. Density Density rock wool blanket is 80 kg/m3, 100 kg/m3 and 130 kg/m3 Thermal conductivity Thicknes mm K-value W/mK 80 kg/m3 100 kg/m3 130 kg/m3 50 0.038 0.037 0.036 75 0.044 0.043 0.042 100 0.053 0.051 0.050 Size Size in mm Length Width Thickness 5000 600 50 -100 3
Page 2 and 3: thirteen
Page 6 and 7: JIC 901 ROCKWOOL BOARD Product Desc
Page 8 and 9: JIC 7000 CH, JIC 7000 / A SILTEMP /
Page 10: JIC 1102 ASBESTOS TAPE DESCRIPTION

thirteen

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?