Partitioning Price List 2011
Partitioning Price List 2011 - Komfort
Partitioning Price List 2011 - Komfort
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Doors<br />
Sale Conditions<br />
Our standard stock doors are not sold as sequentially<br />
matched veneered sets. Custom made doors can be<br />
sequentially matched on request.<br />
In addition to the standard stock door veneers, the<br />
custom door range allows the specifier complete<br />
freedom to choose any veneers that are commercially<br />
available.<br />
Veneered doors are supplied with unlacquered<br />
concealed hardwood lippings to all edges and<br />
are colour co-ordinated to the specified veneer.<br />
Exposed lippings are available on request.<br />
The appearance of a veneered flush door may be<br />
further enhanced to the specifiers choice by the<br />
application of hardwood mouldings or the introduction<br />
of grooves into solid wood inlays.<br />
Standard stock and custom made doors are finished<br />
in UV cured clear lacquers.<br />
No attempt should be made on-site to strip the lacquer<br />
and refinish. Application of stained lacquers to veneers<br />
is available on request.<br />
All laminate manufacturers’ ranges suitable for door<br />
fixings are available for Komfort’s custom doors with<br />
either exposed or concealed lippings.<br />
Door overpanels are supplied oversize to the door<br />
width to facilitate on site fitting.<br />
Credits will not be issued for doors that have already<br />
been hung.<br />
At the time of placing order, please supply<br />
confirmation of all special size requirements, veneers,<br />
veneer cutting, handling etc. to ensure compliance<br />
with current lead times.<br />
Other configurations and veneer cuts are available<br />
on request.<br />
Confirmed orders for doors cannot be cancelled<br />
A CANCELLATION FEE OF 100% WILL BE APPLIED<br />
Komfort Fire Door Assurance Scheme<br />
Following the introduction of the Regulatory Reform<br />
(Fire Safety) Order on 1st October 2006 companies<br />
and individuals responsible for business premises are<br />
required to carry out a fire risk assessment.<br />
To assist the person responsible for identifying fire<br />
protection barriers, Komfort Fire Doors are now<br />
marked on the top edge of the door by means of a<br />
tamper proof label issued under the terms of a third<br />
party certificated fire performance scheme.<br />
Komfort FD30 Fire Doors also carry installation<br />
instructions which should be adhered to in order to<br />
achieve the stated fire performance.<br />
The <strong>Partitioning</strong> <strong>Price</strong> <strong>List</strong> Effective from 1st September <strong>2011</strong> 60