DEPARTMENT MECHANICAL AEROSPACE ENGINEERING

More documents

Recommendations

Info

Mechanical and Aerospace Engineering Missouri University of Science and Technology Mishra, R. (20%), Banerjee, A. (16%), Chandrashekhara, K. (16%), Du, X. (16%), Kimball, J. (16%) and Rovey, J. (16%), Office of Naval Research, “Waves, Wind and Scavengers: Next Generation Renewable Energy Systems for Naval Applications,” $660,008.00, August 16, 2010 - August 15, 2013. Rovey, J. (75%) and Chandrashekhara, K. (25%), Department of Energy, “Remote Monitoring of the Structural Health of Hydrokinetic Turbine Blades,” $159,972.00, October 1, 2010 - March 31, 2012. Rovey, J. (100%), Air Force Office of Science Research, “Energy Conversion and Loss Processes in Heavy Gas, Field-Reversed Configuration Electric Thruster Plasma,” $240,028.00, June 1, 2010 - May 31, 2013. Rovey, J. (100%), Missouri Life Science Research Board, “Pseudospark Pulsed Plasma X-ray Generation for Portable Medical Devices,” $97,786.00, January 1, 2009 - May 31, 2011. Sheffield, J. Sheffield, J. (75%) and Martin, K. (25%), Air Force Research Laboratory, “Advanced Military Installations that Integrate Renewable Energy and Advanced Energy Storage Technologies - Task 4,” $37,625.00, July 10, 2009 - July 9, 2012. Myers, J. (70%) and Sheffield, J. (30%), Department of Transportation, “NUTC (National University Transportation Center for Transportation) Infrastructure and Safety Year 2,” $3,010,000.00, July 1, 2007 - June 30, 2013. Sheffield, J. (100%), General Motors Corporation, “EcoCAR: The NeXt Challenge Project,” $158,669.00, May 1, 2008 - June 30, 2011. Lee, S. (48%), Henthorn, K. (16%), Ludlow, D. (16%), Sheffield, J. (12%) and Grasman, S. (8%), Air Force Research Lab, “Task 3 - Advanced Military Installations that Integrate Renewable Energy and Advanced Energy Storage Technologies,” $537,808.00, July 10, 2009 - July 9, 2012. Dogan, F. (76%), Anderson, H. (4%), Grasman, S. (4%), Hosder, S. (4%), Koylu, U. (4%), Lee, S. (4%) and Sheffield, J. (4%), Air Force Research Lab, “Task 4 - Advanced Military Installations that Integrate Renewable Energy and Advanced Energy Storage Technologies,” $862,500.00, July 10, 2009 - July 9, 2012. Sheffield, J. (80%) and Martin, K. (20%), Air Force Research Laboratory, “Advanced Military Installations that Integrate Renewable Energy and Advanced Energy Storage Technologies,” $324,692.00, July 1, 2009 - July 9, 2012. Rolufs, A. (50%) and Sheffield, J. (50%), Department of Transportation, “FTA Grant - Research on Alternative Sources of Energy to Power Transit Vehicles,” $686,073.00, April 1, 2008 - October 1, 2013. Myers, J. (70%) and Sheffield, J. (30%), Department of Transportation, “National University Transportation Center For Transportation Infrastructure and Safety - Yr 3,” $2,858,100.00, July 1, 2008 - June 30, 2013. Myers, J. (67%) and Sheffield, J. (33%), Department of Transportation, “NUTC (National University Transportation Center for Transportation) Infrastructure and Safety Year 1,” $1,560,000.00, July 1, 2006 - June 30, 2013. Tsai, H. Tsai, H. (60%) and O’keefe, M. (40%), University of Lincoln, “Multi-Laser Beam Open Atmosphere Surface Coating Techniques Based on Precursor Excitation, Photodissociation and Controlled Cooling,” $1,499,999.00, March 15, 2005 - September 30, 2011. Tsai, H. (60%) and O’keefe, M. (40%), Univeristy of Nebraska Lincoln, “Multi-Laser Beam Open Atmosphere Surface Coating Techniques Based on Precursor Excitation, Photodissociation and Controlled Cooling,” $681,836.00, March 15, 2005 - September 30, 2011. Balakrishnan, S. PROFESSIONAL & SCHOLARLY ACTIVITIES CHAIRMAN, CO-CHAIRMAN OF TECHNICAL SESSIONS AND CONFERENCES Co-Chairman of Technical Session, AIAA Guidance, Navigation and Control Conference, Portland, OR, August 8 - 11, 2011. Birman, V. Co-Chairman and Co-organizer of Workshop on Revolutionary Fundamental Research in Support of Energy Harvesting, Austin, TX, August 7, 2011. Chairman of Technical Session, Sandwich Structures, Stability and Identification-II, ASME 2011 International Mechanical Engineering Congress & Exposition, Denver, CO, November 17, 2011. Bristow, D. Organizer, session on “Emerging Applications of Iterative Learning Control”, American Control Conference, July 1, 2011. Organizer and Co-Chair, session on “Iterative Learning Control Design Paradigms,” American Control Conference, July 1, 2011. Du, X. Session Chair, session on “Simulation-based Design Under Uncertainty,” 2011 ASME International Design Engineering Technical Conferences (IDETC) and Computers and Information in Engineering Conference (CIE), Washington, DC, August 28 - 31, 2011. Eversman, W. Session Chair (General Acoustics) 17th AIAA/CEAS Aeroacoustics Conference, Portland, OR, June 2011. Administrative Chair 17th AIAA/CEAS Aeroacoustics Conference, Portland, OR, June 2011. Leu, M. Organizer and Chair of the Industrial Advisory Board Meeting of the Center for Aerospace Manufacturing Technologies, Wichita, KS, May 11, 2011. Takai, S. Session Chair, 2011 ASME International Design Engineering Technical Conference, Washington, DC, August 28 - 31, 2011. SERVICE ON COMMITTEES OF PROFESSIONAL ORGANIZATIONS Armaly, B. Chaired the Accreditation Board for Engineering and Technology’s Finance Committee Meeting, Baltimore, MD, January 27 - 28, 2011. Accreditation Board for Engineering and Technology Executive Committee Meeting (serving as Treasurer), Baltimore, MD, February 24 - 25, 2011. Missouri Board of Boiler and Pressure Vessel Rules Meeting, Jefferson City, MO, February 10, 2011. Accreditation Board for Engineering and Technology Executive Committee Meeting (serving as Treasurer), Baltimore, MD, March 26, 2011. Balakrishnan, S. Member, IEEE Aerospace Technical Committee, 2011. Banerjee, A. Energy Sustainability Committee, ASME, Washington, DC, August 7 - 10, 2011. Tsai, H. (100%), Missouri Life Science Research Board, “Advanced Cardiovascular Stent Built with Nanotechnology,” $216,000.00, January 1, 2009 - December 31, 2011. Birman, V. Member of the Advisory Board, ICCE-19: The Nineteenth International Conference on Composites/ Nano Engineering, Shanghai, China, July 24 - 30, 2011. Crosbie, A. AIAA Thermophysics Publication Subcommittee Meeting, Orlando, FL, January 5, 2011. AIAA Thermophysics Technical Committee Meeting, Orlando, FL, January 5, 2011. AIAA Journals Committee Meeting, Orlando, FL, January 6, 2011. AIAA Publications Committee Meeting, Orlando, FL, January 4 - 7, 2011. AIAA Publications Executive Committee Meeting, Orlando, FL, January 6, 2011. AIAA Editors-in-Chief Committee Meeting (Chair), Orlando, FL, January 6, 2011. AIAA Publications Committee Meeting on Open Access, March 9, 2011. AIAA Publications Committee Meeting on Open Access, March 29, 2011. AIAA Publications Committee Meeting on Open Access, May 10, 2011. Selection Committee for Van de Hulst Light Scattering Award, May 2011. Journal of Thermophysics and Heat Transfer report to American Institute of Aeronautics and Astronautics Thermophysics Committee, June 2011. AIAA Publications Executive Committee Meeting, October 4, 2011.
Drallmeier, J. Board of Directors, Institute of Liquid Atomization and Spray Systems, 2011. Board of Directors, Central States Section of the Combustion Institute, 2011. Du, X. Paper review session co-coordinator, 2011 ASME DETC, March 2011. Paper review co-coordinator, 2011 ASME International Design Engineering Technical Conference, March 2011. Eversman, W. AIAA Aeroacoustics Technical Committee Vice Chair, 2011. AIAA Aeroacoustics Award Selection Committee, 2011. AIAA Aeroacoustics Technical Committee, 2011. AIAA Fellow Selection Sub-Committee, 2011. Finaish, F. Member, Aeronautics Group of the National Council of Space Grant Directors, Washington, DC, March 2011. Member, National Council of the Space Grant Directors, Washington, DC, March 3 - 5, 2011. Chair of the Midwest Space Grant Region Consortia (9 regional states), Washington, DC, March 3 - 5, 2011. Hosder, S. AIAA Hypersonic Technologies and Aerospace Planes Program Committee Meeting, 17th AIAA International Space Planes and Hypersonic Systems and Technologies Conference, San Francisco, CA, April 2011. Isaac, K. M. Represented Dr. Jim Drallmeier at the Aerospace Department Chairs Association meeting, Orlando, FL, January 2011. Koylu, U. ASME K-2 Committee on Long Range Directions and Issues in Heat Transfer, 2011. MacSithigh, G. Arrangements Committee, Society for Natural Philosophy, East Lansing, MI, October 7 - 9, 2011. Takai, S. Secretary of ASME Design for Manufacturing and the Life Cycle Technical Committee, October 2010 - September 2011. Selection committee for the inaugural Design Engineering Division - Design for Manufacturing and the Lifecycle Conference Kos Ishii-Toshiba Award, June 2011. Secretary of ASME Design for Manufacturing and the Life Cycle Technical (DFMLC) Committee, 2011 - 2012. Paper review co-coordinator, 2011 ASME International Design Engineering. Technical Conference, Washington, DC, August 28 - 31, 2011. Vice Chair of ASME Design for Manufacturing and the Life Cycle Technical (DFMLC) Committee, 2011 - 2012. Yang, X. Judge for Intelligent Systems Center poster symposium at Missouri S&T, November 2011. EDITORS OF SYMPOSIUMS, PROCEEDINGS, AND JOURNALS Balakrishnan, S. Associate Editor, AIAA Journal of Guidance, Control, and Dynamics Birman, V. Associate Editor, Applied Mechanics Reviews Co-Editor, Collection of presentations at the “Workshop on Revolutionary Fundamental Research in Support of Energy Harvesting,” Austin, TX Associate Editor, Komposyty (Composites), published by the Polish Society for Composite Materials Associate Editor, Member of Editorial Board, International Journal of Aeronautical and Space Sciences, published by the Korean Society for Aeronautical and Space Sciences Associate Editor, Composites Part B: Engineering Bristow, D. Associate Editor, International Program Committee, 2011 Conference on Control Applications (January 2011 - April 2011) Associate Editor, Mechatronics Chandrashekhara, K. Editorial Advisory Board, Journal of Biobased Materials and Bioenergy, 2011 Crosbie, A. MAE Annual Report 2011 Editorial Advisory Board, International Journal of Thermal Science Editor-in-Chief, AIAA Journal of Thermophysics and Heat Transfer Associate Editor, Journal of Quantitative Spectroscopy & Radiative Transfer Dharani, L. Editorial Board, International Journal of Damage Mechanics International Scientific Committee International Conference on Damage Mechanics Drallmeier, J. Editorial Board Member, Journal of Atomization and Sprays Du, X. Editorial Board Member, International Journal of Reliability and Safety Landers, R. Program Committee Member, IEEE Conference on Control Applications Program Committee Member, International Symposium on Flexible Automation Associate Editor, IEEE Transactions on Control Systems Technology Associate Editor, ASME Journal of Dynamic Systems, Measurement, and Control Associate Editor, ASME Journal of Manufacturing Science and Engineering Liou, F. Associate Editor, Mechanism and Machine Theory, the Journal of IFToMM - The International Federation for the Theory of Machines and Mechanisms Pernicka, H. Managing Editor, The Journal of the Astronautical Sciences Sheffield, J. Subject Editor & Associate Editor, International Journal of Hydrogen Energy Tsai, H. Editorial Board of ISRN Chemical Engineering Balakrishnan, S. Ding, J. and Balakrishnan, S. N., “Approximate Dynamic Programming Solutions with a Single Network Adaptive Critic for a Class of Nonlinear Systems”, Journal of Control Theory and Applications, Vol. 9, No. 3, pp.370 - 380, 2011. Banerjee, A. Haley, A. and Banerjee, A., “Role Of Initial Conditions In Unstably Stratified Hydrogen Air Mixing Zones,” International Journal of Hydrogen Energy, 36, 11174- 11182, DOI:10.1016/j.ijhydene.2011.06.001, 2011. Mukherji, S. S., Kolekar, N., Banerjee, A. and Mishra, R., “Numerical Investigation and Evaluation of Optimum Hydrodynamic Performance of a Horizontal Axis Hydrokinetic Turbine,” Journal of Renewable and Sustainable Energy, Vol. 3, 063105, November 2011. Birman, V. Liu, Y., Birman, V., Chen, C., Thomopoulos, S. and Genin, G. M., “Mechanisms of Bimaterial Attachment at the Interface of Tendon to Bone,” ASME Journal of Engineering Materials and Technology, Vol. 133, doi:10.1115/1.4002641, January 2011. Barton, B., Shetty, M. S., Birman, V. and Dharani, L. R., “Tapered Cylindrical Cantilever Beam Retrofitted with Steel Reinforced Polymer or Grout,” Composites Part B, Vol. 42, pp. 207 - 216, March 2011. Thomopoulos, S., Das, R., Birman, V., Smith, L., Ku, K., Elson, E. L., Pryse, K. M., Marquez, J. P. and Genin, G. M., “Fibrocartilage Tissue Engineering: The Role of the Stress Environment on Cell Morphology and Matrix Expression,” Tissue Engineering Part A, Vol. 17, No. 7-8, pp. 1039 - 1053, April 2011. JOURNAL PUBLICATIONS Nguyen, C. H., Butukuri, R. R., Chandrashekhara, K. and Birman, V., “Dynamics and Buckling of Sandwich Panels with Stepped Facings,” International Journal of Structural Stability and Dynamics, Vol. 11, Issue 4, pp. 697 - 716, August 2011. Bristow, D. Ahn, H. S. and Bristow, D. A., “Special Issue on Iterative Learning Control,” Asian Journal of Control, Vol. 13, No. 1, pp. 1 - 2, January 2011. Bristow, D. A. and Singler, J., “Towards Transient Growth Analysis and Design in Iterative Learning Control,” International Journal of Control, Vol. 84, No. 7, pp. 1234 - 1245, 2011. 17
Page 1 and 2: DEPARTMENT OF MECHANICAL AND AEROSP
Page 3 and 4: MAE Annual Report 2011 CONTENTS Ann
Page 5 and 6: MAE Annual Report 2011 QUICK FACTS
Page 7 and 8: NEW FACULTY MAE Annual Report 2011
Page 9 and 10: MAE Annual Report 2011 DR. JIE GAO
Page 11 and 12: MAE Annual Report 2011 DR. DANIEL S
Page 13 and 14: Leu, M. (100%), Bell Helicopter Tex
Page 15: MAE Annual Report 2011 Isaac, K. Is
Page 19 and 20: Cottrell, C., Grasman, S., Thomas,
Page 21 and 22: Dhaveji, S., Sparks, T. E., Ruan, J
Page 23 and 24: Balakrishnan, S. Jie Ding (PhDME),

DEPARTMENT MECHANICAL AEROSPACE ENGINEERING

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?