DEPARTMENT MECHANICAL AEROSPACE ENGINEERING

More documents

Recommendations

Info

Mechanical and Aerospace Engineering Missouri University of Science and Technology Loganathan, M., Kodandarama, S. R. and Bristow, D. A., “Measurement Sensitivity Improvement in Tapping-mode Atomic Force Microscopy through Bi- Harmonic Drive Signal,” Review of Scientific Instruments, Vol. 82, No. 103704, October 2011. Chandrashekhara, K. Chen, J., Chandrashekhara, K., Mahimkar, S. C., Lekakh, S. N. and Richards, V. L., “Void Closure Prediction in Cold Rolling Process Using Finite Element Analysis and Neural Network,” Journal of Materials Processing Technology, Vol. 211, pp. 245 - 255, February 2011. Nguyen, C. H., Butukuri, R. R., Chandrashekhara, K. and Birman, V., “Dynamics and Buckling of Sandwich Panels with Stepped Facings,” International Journal of Structural Stability and Dynamics, Vol. 11, Issue 4, pp. 697 - 716, August 2011. Crosbie, A. Crosbie, A. L., “A Twenty-Fourth Successful Year for the Journal of Thermophysics and Heat Transfer,” AIAA Journal of Thermophysics and Heat Transfer, Vol. 25, pp. 1 - 4, January 2011. Dharani, L. Barton, B. L., Shetty, M. S., Birman, V. and Dharani, L. R., “Tapered Cylindrical Beam Retrofitted with Steel Reinforced Polymer or Grout,” Composites Part B: Engineering, Part B 42, pp. 207 - 216, January 2011. Drallmeier, J. Massey, J. A., Wagner R. M., and Drallmeier, J. A., “Application of Accelerometers for Sensing Combustion Phasing of an Advanced Combustion Engine,” International Journal of Engine Research, Vol. 12, No. 5, pp. 405 - 420, October 2011. Du, X. Zhang, J. and Du, X., “Time-Dependent Reliability Analysis for Function Generator Mechanisms,” Journal of Mechanical Design, Vol. 133, No. 3, 031005, March 2011. Zhang, J. and Du, X., “Time-Dependent Reliability Analysis for Function Generator Mechanisms,” ASME Journal of Mechanical Design, Vol. 133, pp. 031005- 1–031005-9, March 2011. Wang, J., Zhang, J. and Du, X., “Hybrid Dimension Reduction for Mechanism Reliability Analysis with Random Joint Clearances,” Mechanism and Machine Theory, Vol. 46, No. 10, pp. 1396 - 1410, October 2011. Eversman, W. Eversman, W. and Gallman, J., “Impedance Eduction with an Extended Search Procedure,” AIAA Journal, Vol. 49, No. 9, September 2011. Hosder, S. Bettis, B. and Hosder, S., “Efficient Uncertainty Quantification Approach for Reentry Flows with Mixed Uncertainties,” Journal of Thermophysics and Heat Transfer, Vol. 25, No. 4, pp. 523 - 534, October 2011. Hutcheson, R. Nagel, R., Hutcheson, R., McAdams, D. and Stone, R., ”Process and Event Modeling for Conceptual Design,” Journal of Engineering Design, Vol. 22, Issue 3, March 2011. Isaac, K. Sen, D., Isaac, K. M., Leventis, N. and Fritsch, I., “Investigation of Transient Redox Electrochemical MHD Using Numerical Simulations,” International Journal of Heat and Mass Transfer, Vol. 54, pp. 5368 – 5378, September 2011. Koylu, U. Vudumu, S. K. and Koylu, U. O., “Computational Modeling, Validation, and Utilization for Predicting the Performance, Combustion and Emissions Characteristics of Hydrogen IC Engines,” Energy, Vol. 36, pp. 647 - 655, January 2011. Landers, R. Tang, L. and Landers, R. G., “Layer–to–Layer Height Control for Laser Metal Deposition Processes,” ASME Journal of Manufacturing Science and Engineering, Vol. 133, No. 2, 021009, April 2011. Landers, R. G., Galecki, G., Young, K. and Hanks, R., “Peripheral Milling of Thin Titanium Plates: Modeling, Analysis, and Process Planning,” Proceedings of the Institution of Mechanical Engineers Part B – Journal of Engineering Manufacture, Vol. 225, No. 6, pp. 783 – 798, June 2011. Leu, M. Doiphode, N. D., Huang, T., Leu, M. C., Rahaman, M. N. and Day, D. E., “Freeze Extrusion Fabrication of 13- 93 Bioactive Glass Scaffolds for Bone Repair,” Journal of Material Science: Materials in Medicine, Vol. 22, No. 3, March 2011. Kolan, K. C. R., Leu, M. C., Hilmas, G. E., Brown, R. F. and Velez, M., “Fabrication of 13-93 Bioactive Glass Scaffolds for Bone Tissue Engineering Using Indirect Selective Laser Sintering,” Journal of Biofabrication, Vol. 3, No. 2, ID: 025004.download, June 2011. Oz, C. and Leu, M. C., “American Sign Language Word Recognition with a Sensory Glove Using Artificial Neural Networks,” Journal of Engineering Applications of Artificial Intelligence, Vol. 24, pp. 1204 - 1213, 2011. Joshi, A., Leu, M. C. and Murray, S. L., “Fastening Ergonomics Study Based on State-Space Modeling of Hand-Arm System,” International Journal of Human Factors Modeling and Simulation, Vol. 2, No. 1/2, 2011, pp. 26 - 46. Bourell, D. L., Leu, M. C., Chakravarthy, K., Guo, N. and Alayavalli, K., “Graphite-Based Indirect Laser Sintered Fuel Cell Bipolar Plates Containing Graphite Fiber Additions,” Journal of Manufacturing Technology – CIRP Annals, Vol. 60, No. 1, pp. 275 - 278, 2011. Huang, T., Doiphode, N. D., Rahaman, M. N., Leu, M. C., Bal, B. S., Day, D. E. and Liu, X., “Porous and Strong Bioactive Glass (13-93) Scaffolds Fabricated by Freeze Extrusion Technique,” Journal of Material Science and Engineering: C, Vol. 31, No. 7, pp. 1482 - 1489, October 2011. Zhu, W., Vader, A. M., Chadda, A., Leu, M. C., Liu, X. F. and Vance, J. B., “Wii Remote Based Low-Cost Motion Capture for Automated Assembly Simulation,” Journal of Virtual Reality, Vol. 15, Nos. 2 - 3, doi://10.1007/s10055-011-0204-z, December 2011. Liou, F. Chen, X., Sparks, T., Ruan, J. and Liou, F. W., “Study of Ti64 Vibration Laser Metal Deposition Process,” Journal of Advanced Materials Research, Vol. 189 - 193, pp. 512-517, 2011. Dietrich, D., Hayes, M. and Liou, F. W., “Additive Manufacturing Mechanical Property Assessment and Part Candidate Screening,” International Journal of Rapid Manufacturing (IJRapidM): Special Issue on: “Rapid Manufacturing in Medical Applications,” Vol. 2, No. 1/2, pp. 28 - 55, 2011. Shyam, B., Sparks, T. and Liou, F. W., “Development of Low Cost Imaging System for Laser Metal Deposition Processes,” Rapid Prototyping Journal, Vol. 17, Issue 3, pp. 203 – 210, 2011. Kulkarnia, N., Liou, F. W. and Newkirk, J. W., “Comparison of Direct Deposition Process and Electro-Write Process for Proton Exchange Membrane Fuel Cell MEA Manufacturing,” Journal of Sustainable Manufacturing and Renewable Energy, Article 2, Vol. 1, Issue 1 - 2, 2011. Pernicka, H. Lee, D. and Pernicka, H. J., “Integrated System for Autonomous Proximity Operations and Docking,” International Journal of Aeronautical and Space Sciences, Paper No. IJASS10-041, pp. 43 - 56, December 2011. Lee, D. and Pernicka, H. J., “Vision-Based Relative State Estimation Using the Unscented Kalman Filter,” International Journal of Aeronautical and Space Sciences, Paper No. IJASS10-032, pp. 24 - 36, December 2011. Riggins, D. Marley, C. and Riggins, D. W., “Numerical Study of Novel Drag Reduction Techniques for Hypersonic Blunt Bodies,” AIAA Journal, Vol. 49, No. 9, pp. 1871 - 1882, September 2011. Rovey, J. Donius, B. R. and Rovey, J. L., “Ionic Liquid Dualmode Spacecraft Propulsion Assessment,” Journal of Spacecraft and Rockets, Vol. 48, No. 1, January/ February 2011. Jing, H. and Rovey, J. L., “Faraday Cup with Nanosecond Response and Adjustable Impedance for Fast Electron Beam Characterization,” Review of Scientific Instruments, Vol. 82, No. 073504, July 2011. Sheffield, J. Arauco, E., Grasman, S., Thomas, M., Martin, K. B. and Sheffield, J. W., “Design Layout of Hydrogen Research and Development Garage,” International Journal of Hydrogen Energy, Vol. 36, Issue 13, pp. 8017-8022, July 2011.
Cottrell, C., Grasman, S., Thomas, M., Martin, K. B. and Sheffield, J. W., “Strategies for Stationary and Portable Fuel Cell Markets,” International Journal of Hydrogen Energy, Vol. 36, Issue 13, pp. 7969 - 7975, July 2011. Shah, A., Mohan, V., Sheffield, J. W. and Martin, K. B., “Solar Powered Residential Hydrogen Fueling Station,” International Journal of Hydrogen Energy, Vol. 36, Issue 20, pp. 13132 - 13137, October 2011. Takai, S. Takai, S., “A Pre-Post Assessment of Creativity Methods in an Experimental Course,” International Journal of Engineering Education, Vol. 27, pp. 380 - 388, April 2011. Takai, S., Jikar, V. K. and Ragsdell, K. M., “An Approach Toward Integrating Top-Down and Bottom-Up Product Concept and Design Selection,” ASME Journal of Mechanical Design, Vol. 133, No. 7, 071007, July 2011. Takai, S., Yang, T. G. and Cafeo, J. A., “A Bayesian Method for Predicting Future Customer Need Distributions,” Concurrent Engineering: Research and Applications, Vol. 19, No 3, pp. 255 - 264, October 2011. Tsai, H. Jiang, L., Li, X., Zhang, X. P., Chen, Q. H., Tsai, H. L. and Lu, Y. F., “Short Pulse Laser Micro/Nano Manufacturing: Fundamentals and Applications,” International Journal of Nanomanufacturing, Vol. 7, pp. 126 – 142, January 2011. Han, Y., Liang, Z., Sun, H., Xiao, H. and Tsai, H. L., “Nanostructured Substrate with Nanoparticles Fabricated by Femtosecond Laser for Surface–Enhanced Raman Scattering,” Applied Physics A, Vol. 102, pp. 415 – 419, January 2011. Zhao, L. J., Jiang, L., Wang, S., Xiao, H., Lu, Y. F. and Tsai, H. L., “A High-Quality Mach-Zehnder Interferometer Fiber Sensor by Femtosecond Laser One-Step Processing,” Sensors, Vol. 11, pp. 54 - 61, January 2011. Han, Y., Liang, Z., Sun, H., Xiao, H. and Tsai, H. L., “Nanostructured Substrate with Nanoparticles Fabricated by Femtosecond Laser for Surface–Enhanced Raman Scattering,” Applied Physics A, Vol. 102, pp. 415 – 419, January 2011. Lin, N., Jiang, L., Wang, S., Xiao, H., Lu, Y. F. and Tsai, H. L., “Thermostable Refractive Index Sensors Based on Whispering Gallery Modes in a Microsphere Coated with Poly (Methyl Methacrylate),” Applied Optics, Vol. 50, pp. 992 - 998, February 2011. Lin, N., Jiang, L., Wang, S., Xiao, H., Lu, Y. F. and Tsai, H. L., “Thermostable Refractive Index Sensors Based on Whispering Gallery Modes in a Microsphere Coated with Poly (Methyl Methacrylate),” The Virtual Journal for Biomedical Optics, Vol. 6, May 4, 2011. Rao, Z. H., Liao, S. M. and Tsai, H. L., “Modeling of Hybrid Laser–GMA Welding: Review and Challenges,” Science and Technology of Welding and Joining, Vol. 16, pp. 300 – 305, February 2011. Liang, Z. and Tsai, H. L., “Thermal Conductivity of Interfacial Layers in Nanofluids,” Physics Review E, Vol. 83, 041602, April 2011. Wang, S. M., Jiang, L., Li, B. Y., Zhao, L. J., Yang, J. P., Wang, M. M., Xiao, H. , Lu, Y. F. and Tsai, H. L., “Ultrafast Laser Fabrication of Novel Fiber Mach Zehnder Interferometer Sensors and Its Cost–Effective Alternative Manufacturing Methods,” Chinese Journal of Lasers, Vol. 38, 0601002, May 2011. Li, B. Y., Jiang, L., Wang, S., Zhou, L. Y., Xiao, H. and Tsai, H. L., “Ultra–Abrupt Tapered Fiber Mach– Zehnder Interferometer Sensors,” Sensors, Vol. 11, pp. 5729 – 5739, May 2011. Li, B. Y., Jiang, L., Wang, S. M., Tsai, H. L. and Xiao, H., “Femtosecond Laser Fabrication of Long Period Fiber Gratings and Applications in Refractive Index Sensing,” Optics & Laser Technology, Vol. 43, pp. 1420 – 1423, May 2011. MAE Annual Report 2011 Liang, Z. and Tsai, H. L., “Effect of Molecular Film Thickness on Thermal Conduction Across Solid-Film Interfaces,” Physics Review E, Vol. 83, 060603, June 2011. Wang, C., Jiang, L., Wang, F., Li, X., Yuan, Y. P. and Tsai, H. L., “First–Principles Calculations of the Electron Dynamics during Femtosecond Laser Pulse Train Material Interactions,” Physics Letters A, Vol. 375, pp. 3200 – 3204, July 2011. Lin, N., Jiang, L., Wang, S., Xiao, H., Lu, Y. F. and Tsai, H. L., “Design and Optimization of Liquid Core Optical Ring Resonator in Refractive Index Sensing,” Applied Optics, Vol. 50, pp. 3615 – 3621, July 2011. Hamdorf, A., Olson, M., Lin, C. H., Jiang, L., Zhou, J., Xiao, H. and Tsai, H. L., “Femtosecond and Nanosecond Laser Fabricated Substrate for Surface–Enhanced Raman Scattering,” Optics Letters, Vol. 36, pp. 3353 – 3355, August 2011. Yang, J. P., Jiang, L., Wang, S., Li, B. Y., Wang, M. M., Xiao, H., Lu, Y. F. and Tsai, H. L., “High Sensitivity of Taper–Based Mach–Zehnder Interferometer Embedded in a Thinned Optical Fiber for Refractive Index Sensing,” Applied Optics, Vol. 50, pp. 5503 – 5507, September 2011. Lin, N., Jiang, L., Wang, S, Xiao, H., Tsai, H. L. and Lu, Y. F., “Simulation and Optimization of Polymer–Coated Microsphere Resonators in Chemical Vapor Sensing,” Applied Optics, Vol. 50, pp. 5465 – 5472, September 2011. Lin, N., Jiang, L., Wang, S., Xiao, H., Tsai, H. L. and Lu, Y. F., “Ultrasensitive Thermal Sensors Based on Whispering Gallery Modes in a Polymer Core Optical Ring Resonator,” Applied Optics, Vol. 50, pp. 6254 – 6260, November 2011. Liang, Z. and Tsai, H. L., “Effect of Thin Film Confined between Two Dissimilar Solids on Interfacial Thermal Resistance,” Journal of Physics: Condensed Matter, Vol. 23, 495303, November 2011. REFEREED CONFERENCE PAPERS IN PROCEEDINGS Balakrishnan, S. Mannava, A. and Balakrishnan, S. N., “A Novel Integrator-less Robust Adaptive Control Scheme for Aerospace Tracking Application,” Proceedings of 49th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition, AIAA- 2011-1342, Orlando, FL, January 4 - 7, 2011. Heydari, A. and Balakrishnan, S. N., “Finite-Horizon Input-Constrained Nonlinear Optimal Control Using Single Network Adaptive Critics,” Proceedings of 2011 American Control Conference, pp. 3047 - 3052, San Francisco, CA, June 29 - July 1, 2011. Yang, Y., Balakrishnan, S. N., Tang, L. and Landers, R. G., “Electro-Hydraulic Piston Control using Neural MRAC Based on a Modified State Observer,” Proceedings of 2011 American Control Conference, pp. 25 - 30, San Francisco, CA, June 29 - July 1, 2011. Ding, J. and Balakrishnan, S. N., “Constrained Optimal Control for a Class of Nonlinear Systems with Uncertainties,” Proceedings of the 2011 American Control Conference, pp. 330 - 335, San Francisco, CA, June 29 - July 1, 2011. Yamasaki, T., Balakrishnan, S. N. and Takano, H., “Sliding Mode Based Integrated Guidance and Autopilot for Chasing UAV with the Concept of Time- Scaled Dynamic Inversion”, Proceedings of 2011 American Control Conference, pp. 1598 - 1603, San Francisco, CA, June 29 - July 1, 2011. Harl, N., Rajagopal, K. and Balakrishnan S. N., “Modified State Observer for Orbit Uncertainty Estimation,” Proceedings of the AIAA Guidance, Navigation, and Control Conference, AIAA-2011-6616, Portland, OR, August 8 - 11, 2011. Heydari, A. and Balakrishnan, S. N., “Optimal Online Path Planning for Approach and Landing Guidance,” Proceedings of the AIAA Atmospheric Flight Mechanics Conference, AIAA-2011-6641, Portland, OR, August 8 - 11, 2011. Yamasaki, T., Balakrishnan, S. N. and Takano, H., “Modified CLOS Intercept Guidance for Aircraft Defense Against a Guided Missile,” Proceedings of the AIAA Guidance, Navigation, and Control Conference, AIAA-2011-6421, Portland, OR, August 8 - 11, 2011. Banerjee, A. Lobo, V., Banerjee, A., Mainsah, N. and Kimball, J., “Hydrokinetic Energy Harvesting System from Vortex Induced Vibrations of Submerged Bodies,” Paper No. ESFuelCell2011-54353, ASME 2011 5th International Conference on Energy Sustainability & 9th Fuel Cell Science, Engineering and Technology Conference, Washington, DC, August 7 - 10, 2011. Kolekar, N., Mukherji, S. and Banerjee, A., “Numerical Modeling and Optimization of Hydrokinetic Turbines,” Paper No. ESFuelCell2011-54252, ASME 2011 5th International Conference on Energy Sustainability & 9th Fuel Cell Science, Engineering and Technology Conference, Washington, DC, August 7 - 10, 2011. Birman, V. Liu, Y., Birman, V., Chen, C., Thomopoulos, S. and Genin, G. M., “Tailoring the Gross Morphology of the Tendon-to-Bone Insertion for the Reduction of Stress Concentrations,” Paper SBC2011-53636, Proceedings of the ASME 2011 Summer Bioengineering Conference, Farmington, PA, June 22 - 25, 2011. 19
Page 1 and 2: DEPARTMENT OF MECHANICAL AND AEROSP
Page 3 and 4: MAE Annual Report 2011 CONTENTS Ann
Page 5 and 6: MAE Annual Report 2011 QUICK FACTS
Page 7 and 8: NEW FACULTY MAE Annual Report 2011
Page 9 and 10: MAE Annual Report 2011 DR. JIE GAO
Page 11 and 12: MAE Annual Report 2011 DR. DANIEL S
Page 13 and 14: Leu, M. (100%), Bell Helicopter Tex
Page 15 and 16: MAE Annual Report 2011 Isaac, K. Is
Page 17: Drallmeier, J. Board of Directors,
Page 21 and 22: Dhaveji, S., Sparks, T. E., Ruan, J
Page 23 and 24: Balakrishnan, S. Jie Ding (PhDME),

DEPARTMENT MECHANICAL AEROSPACE ENGINEERING

Create successful ePaper yourself

Delete template?

Save as template?