DEPARTMENT MECHANICAL AEROSPACE ENGINEERING

More documents

Recommendations

Info

Mechanical and Aerospace Engineering Missouri University of Science and Technology Hutcheson, R. Hutcheson, R., “Best Practices for Lab Courses,” invited roundtable discussion for Missouri University of Science and Technology Center for Educational Research and Teaching Innovation, Rolla, MO, February 23, 2011. Hutcheson, R., “IDE20 eFellows Project,” invited presentation at the 2011 Missouri S&T Teaching and Learning Technology Conference, Rolla, MO, March 10, 2011. Koylu, U. Koylu, U., “Conventional and Sustainable Energy Systems,” Physics Colloquium, Truman State University, Kirksville, MO, May 8, 2011. Koylu, U., “Search for Cleaner Energy in Traditional Combustion, Alternative Fuels, and Fuel Cells,” Seminar, Koc University, Instanbul, Turkey, November 30, 2011. Landers, R. Landers, R. G., “Manufacturing Process Control,” presented at Xi’an University of Technology, Xi’an, China, June 30, 2011. Leu, M. Leu, M. C., “Motion Capture with Wii Remotes,” presented at CIRP January Meeting, STC-A, Paris, France, January 27, 2011. Leu, M. C., “Additive Manufacturing with Rapid Freeze Prototyping, Freeze-Form Extrusion Fabrication, and Selective Laser Sintering,” National University of Singapore, Singapore, September 23, 2011. Liou, F. Liou, F., “Laser Metal Deposition and Its Emerging Applications,” invited seminar by Industrial Technology Research Institute (ITRI), Tainan, Taiwan, March 30, 2011. Liou, F., “Multiscale and Multiphysics Modeling of Additive Manufacturing of Advanced Materials - 1,” NASA Langley Research Center, VA, July 7, 2011. Liou, F., “Is Modeling Really Useful and Practical in Product Development?” National Cheng-Kung University, Tainan, Taiwan, December 23, 2011. Rovey, J. Pahl, R., Meeks, W., Hulsey, T., Lewis, W. and Rovey, J. L., “Missouri S&T’s Role in Developing High-Power Advanced Space Propulsion,” presented to University of Missouri Board of Curators, March 22, 2011. Sheffield, J. Sheffield, J., Missouri S&T EcoCAR PowerPoint and Video Presentation to the Board of Curators’ Dinner Meeting, Rolla, MO, March 21, 2011 . Tsai, H. Tsai, H., “Femtosecond Laser Fabrication of Microsensors for Chemical and Biological Sensing and Detection,” Industrial Technology Research Institute South, Tainan, Taiwan, January 4, 2011. Yang, X. Yang, X., “Manipulating Light with Optical Nanostructures,” Electrical Engineering, Missouri University of Science and Technology, November 2011. Yang, X., “Manipulating Light with Engineered Optical Nanostructures,” Physics, Missouri University of Science and Technology, November 2011. Yang, X., “Light Manipulation with Optical Nanostructures,” Biomedical Engineering, Washington University in St. Louis, December 2011. Banerjee, A. Roach, P. and Banerjee, A., “An Update on Experiments and Simulations of Rayleigh Taylor Instability in Elastic Plastic Solids,” American Physical Society - Division of Fluid Dynamics, Baltimore, MD, November 20 - 22, 2011. Banerjee, A. and Haley, A., “Progress on 2-Wheel High Acceleration Experiment to Study Rayleigh Taylor Instability,” American Physical Society - Division of Fluid Dynamics, Baltimore, MD, November 20 - 22, 2011. Birman, V. Liu, Y., Thomopoulos, S., Birman, V., Li, J-S. and Genin ,G. M., “Bi-material Attachment Through a Soft Tissue Interfacial System,” First Annual Musculoskeletal Winter Symposium, Washington University School of Medicine, St. Louis, MO, January 27, 2011. Birman, V. and Keil, T., “Observations on Energy Harvesting Techniques and Flextensional Bimorph Technologies,” Workshop on Revolutionary Fundamental Research in Support of Energy Harvesting, Austin, TX, April 7, 2011. Liu, Y., Gitomer-Schwartz, A., Birman, V., Chen, C., Thomopoulos, S. and Genin, G. M., “Where Does Mineral Fit Within Partially Mineralized Collagen, and What Does It Mean for the Attachment of Tendon to Bone?” Paper McMat2011-4535, ASME 2011 Applied Mechanics and Materials Conference, Chicago, IL, May 31 – June 2, 2011. Liu, Y., Gitomer-Schwartz, A., Birman, V., Chen, C., Thomopoulos, S. and Genin, G. M., “Stress in the Developing Rotator Cuff: Effects of Evolving Material and Structural Properties.” Paper McMat2011-4527, ASME 2011 Applied Mechanics and Materials Conference, Chicago, IL, May 31 – June 2, 2011. Bristow, D. White, P. J. and Bristow, D. A., “An Adaptive Precision Motion Control Methodology for a Multi-Axis MEMS Array,” American Society for Precision Engineering Annual Meeting, Denver, CO, November 17, 2011. Drallmeier, J. CONFERENCE PRESENTATIONS Massey, J. A., Bettis, J. B., Attebery, A. D., Drallmeier, J. A. and Sarangapani, J., “Capturing Cycle-to-Cycle Dynamics in an HCCI Engine Using a Five-State Thermodynamic Model,” 7th U.S. National Meeting of the Combustion Institute, Atlanta, GA, March 2011. Landers, R. Landers, R. G., “Implementation and Evaluation of a Mini–CNC Rapid Development System,” NSF CCLI TUES Principle Investigator’s Conference, Washington, DC, January 27, 2011 (poster only). Landers, R. G., “REU Site in Additive Manufacturing,” NSF Engineering Education Awardees’ Conference, Reston, VA, March 5 - 6, 2011 (poster only). Leu, M. Leu, M. C., Hilmas, G. E., Landers, R. G., Roman, C., Zhang, S. and Tang, L., “Freeze-Form Extrusion Fabrication of Composite Structures using Ultra- High Temperature Ceramics and Refractory Metals,” Proceedings of 2011 NSF CMMI Research and Innovation Conference, Atlanta, GA, January 4 - 7, 2011. Leu, M. C., “Real-Time Automated Simulation Generation Based on CAD Modeling and Motion Capture,” 2011 PACE Global Annual Forum, Vancouver, Canada, July 27 - 30, 2011. Leu, M. C., “Update of the 2013 Keynote Paper on CAD Model Based Assembly Simulation, Planning and Training,” CIRP General Assembly, STC-A meeting, Budapest, Hungary, August 26, 2011. Leu, M. C., “Fabrication of Bioactive Glass Scaffolds by Freeze Extrusion Fabrication and Selective Laser Sintering for Bone Repair,” CIRP General Assembly, CWG-BioManufacturing, Budapest, Hungary, August 25, 2011. Leu, M. C., “CAMT and Its Research on Freezeform Extrusion Fabrication,” Boeing GlobalNet 2011 Conference, Singapore, Singapore, September 19 - 21, 2011. Liou, F. Liou, F., “A Rapid Manufacturing Process for High- Precision Metal Parts,” Proceedings of the DARPA Open Manufacturing - Midwest Meeting, Detroit, MI, March 9, 2011. Liou, F., “Modeling of A Hybrid Manufacturing System,” 2011 Midwest Chinese-American Science and Technology Symposium, St. Louis, MO, September 10, 2011. Okafor, A. Okafor, A. C. and Talekar, V., “Determination of Specific Cutting Force Coefficients for Web-Based Cutting Force Modeling and Simulation in Machining Titanium Alloys,” Proceedings of 2011 NSF Engineering Research and Innovation Conference, Atlanta, GA, January 4 – 7, 2011. Okafor, A. C. and Kilicay, O., “Design and Manufacture of Alternative Low Cost and Durable Metallic Bipolar Plates for Polymer Electrolyte Membrane (PEM) Fuel Cell,” Proceedings of the Hydrogen and Fuel Cells 2011 International Conference and Exhibition, Vancouver, British Columbia, Canada, May 15 - 18, 2011. Sheffield, J. Martin, K. B., Meintz, A., Bapat, A. and Sheffield, J. W., “Missouri S&T EcoCAR: Fuel Cell Plug-In Hybrid Electric Vehicle,” Fuel Cell & Hydrogen Energy 2011, Washington, DC, February 13 - 16, 2011. Shah, A., Mohan, V. and Sheffield, J. W., “Solar Powered Residential Filling Station for Fuel Cell Plug-in Hybrid Electric Vehicle,” Fuel Cell & Hydrogen Energy 2011, Washington, DC, February 13 - 16, 2011.
Balakrishnan, S. Jie Ding (PhDME), Advisor: Balakrishnan, S. N., “Approximate Dynamic Programming Solutions of a Single Network Adaptive Critic for a Class of Nonlinear Systems,” March 2011. Birman, V. M.S. THESIS AND PH.D. DISSERTATIONS Tyler Keil (MSAE), Advisor: Birman, V., “Design, Analysis, and Optimization of Composite Structures for Aerospace Applications,” July 2011. Cody Huu Nguyen (PhDME), Advisor: Birman, V., “Sandwich Structures with Advanced Facings,” July 2011. Du, X. Harsheel Shah (MSAE), Advisor: Du, X., “Quantifying Model Uncertainty Using Measurement Uncertainty Standards,” July 2011. Finaish, F. Justin Roger Aholt (MSAE), Advisor: Finaish, F., “Computational Investigation of Plasma Actuator as an Active Flow Control Strategy of Laminar Separation Bubbles,” July 2011. Homan, K. James Tinsley (MSAE), Advisor: Homan, K., “Heat Transfer Augmentation in Rectangular Ducts Due to Passive Flow Destabilization,” September 2011. Hosder, S. MAE Annual Report 2011 Jason Searcy (MSAE), Advisor: Pernicka, H., “Magnetometer-Only Attitude Determination with Application to the M-SAT Mission,” March 2011. Tonya Sanders (MSAE), Advisor: Pernicka, H., “Shaker Table Vibration Testing of a Microsatellite,” April 2011. Riggins, D. Christopher David Marley (MSAE), Advisor: Riggins, D., “A Numerical Study of Novel Drag Reduction Techniques for Blunt Bodies in Hypersonic Flows,” April 2011. Rovey, J. John Gaither (MSAE), Advisor: Rovey, J., “Numerical Comparison of Thermal and Kinetic Modification of Hydrogen and Oxygen,” March 2011. Bristow, D. Patrick J. White (MSME), Advisor: Bristow, D., “Design and Control of a Multi-Axis Micro- Mechanical System Array for Coordinated Micro- Manipulation,” May 2011. Chandrashekhara, K. Ramanjaneya Reddy Butukuri (MSME), Advisor: Chandrashekhara, K., “Design Optimization Through Design of Experiments, Out-of-Autoclave Manufacturing and Performance Evaluation of Honeycomb Sandwich Structures,” January 2011. Jian Chen (PhDME), Advisor: Chandrashekhara, K., “Nonlinear Modeling and Simulation of Radial Forging Process,” May 2011. Venkatagireesh Menta (PhDME), Advisor: Chandrashekhara, K., “Advanced Composites Using Non-Autoclave Processes: Manufacturing and Characterization,” August 2011. Nathaniel James Richie (MSME), Advisor: Chandrashekhara, K., “Development of Hybrid Composite Bipolar Plates for Proton Exchange Membrane Fuel Cells,” August 2011. Nathan Robert Roe (MSME), Advisor: Chandrashekhara, K., “Advanced Moisture Modeling of Polymer Composites,” December 2011. Dharani, L. Jared Loebs (MSME), Advisor: Dharani, L. R., “Processing and Mechanical Characterization of Polyurea Aerogel,” September 2011. Drallmeier, J. Shawn Wildhaber (MSME), Advisor: Drallmeier, J. A., “Impact of Combustion Phasing on Energy and Availability Distributions of an Internal Combustion Engine,” February 2011. Jeffery A. Massey (PhDME), Advisor: Drallmeier, J. A., “Development of a Simple Vibration Model for Predicting the Structural Dynamics of an HCCI I,” September 2011. Cory H. Huck (MSME), Advisor: Drallmeier, J. A., “Methods of Optimizing the Gas Exchange Process to Improve Fuel Efficiency of Small Carbureted Spark Ignition Engines,” December 2011. Daoru Han (MSAE), Advisor: Hosder, S., “Inherent and Model-Form Uncertainty Analysis for CFD Simulation of Synthetic Jet Actuators,” July 2011. Koylu, U. Sachin Laxman Puthran (MSME), Advisor: Koylu, U., “3-Dimensional CFD Modeling of Tubular Solid Oxide Fuel Cell Using Different Fuels,” August 2011. Leu, M. Rohit Vijay Bapat (MSME), Advisor: Leu, M., “Integration of Multiple Vision Systems and Toolbox Development,” December 2011. Liou, F. Amar Bala Sridhar (MSMfge), Advisor: Liou, F., “Innovative Air Breathing Design and Output Control for Portable Proton Exchange Membrane Fuel Cell,” April 2011. Shyam Barua (MSMfge), Advisor: Liou, F., “Development of Lower Cost Imaging Systems for Laser Metal Deposition Process,” May 2011. Haythem Gaja (MSMfge), Advisor: Liou, F., “Analysis and Modeling of Depth-of-Cut During End Milling Process of Deposited Material,” May 2011. Sweta Dhaveji Chakravadhanula (MSMfge), Advisor: Liou, F., “Generic Kinematic Simulation of Serial Mechanisms to Validate Laser Metal Deposition Tool Paths,” December 2011. Jomy Francis (MSMfge), Advisor: Liou, F., “5-Axis Tool Path Generation with Collision Detection for Finish Machining of Freeform Surfaces,” December 2011. Okafor, A. Vinay Rao Talekar (MSME), Advisor: Okafor, A. C., “Development of Virtual CNC Machine Tools and Web-Based Machining Process Simulation mechanistic Cutting Force Models and Determination of Specific Force Coefficients in Helical End Milling,” July 2011. Pernicka, H. James Meub (MSAE), Advisor: Pernicka, H., “Continuous Low Thrust for Small Spacecraft Proximity Operations,” March 2011. David Zidar (MSAE), Advisor: Rovey, J., “Hall-effect Thruster Surface Properties Investigation,” March 2011. Sheffield, J. Vijay Mohan (MSME), Advisor: Sheffield, J. W., “Design of a Hydrogen Community for Santa Monica,” July 2011. Aanchal Shah (MSME), Advisor: Sheffield, J. W., “Solar Powered Residential Fueling Station,” August 2011. Takai, S. Swithin Samuel Razu (MSME), Advisor: Takai, S., “A Comparison of Bootstrap, Binomial Inference, and Monte Carlo Methods for Demand Distribution Modeling,” April 2011. Tsai, H. Yukun Han (PhDME), Advisor: Tsai, H. L., “Femtosecond Laser Micromachining of Microstructures for Sensing and Detection,” April 2011. Matthew Olson (MSME), Advisor: Tsai, H. L., “Fabrication of SERS Active Nanostructures by Femtosecond Laser Micromachining,” April 2011. Adam Hamdorf (MSME), Advisor: Tsai, H. L., “Femtosecond and Nanosecond Laser Machined Substrate for Surface-Enhanced Raman Scattering,” May 2011. Photograph on back cover courtesy of Gayle Babcock at Architectural Imageworks, LLC 23
Page 1 and 2: DEPARTMENT OF MECHANICAL AND AEROSP
Page 3 and 4: MAE Annual Report 2011 CONTENTS Ann
Page 5 and 6: MAE Annual Report 2011 QUICK FACTS
Page 7 and 8: NEW FACULTY MAE Annual Report 2011
Page 9 and 10: MAE Annual Report 2011 DR. JIE GAO
Page 11 and 12: MAE Annual Report 2011 DR. DANIEL S
Page 13 and 14: Leu, M. (100%), Bell Helicopter Tex
Page 15 and 16: MAE Annual Report 2011 Isaac, K. Is
Page 17 and 18: Drallmeier, J. Board of Directors,
Page 19 and 20: Cottrell, C., Grasman, S., Thomas,
Page 21: Dhaveji, S., Sparks, T. E., Ruan, J

DEPARTMENT MECHANICAL AEROSPACE ENGINEERING

Create successful ePaper yourself

Delete template?

Save as template?