Dixon Sanitary 2010 Catalog
Dixon Bradford Sanitary Division - Goodyear
Dixon Bradford Sanitary Division - Goodyear
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Technical Information<br />
Size<br />
Pipe OD<br />
Tapered Threads<br />
Thread Dimensions<br />
Straight Threads<br />
NPT BSPTr Acme 3A<br />
TPI TPI TPI ODM (max) IDF (min)<br />
1/8" .405 27 28<br />
1/4" .504 18 19<br />
3/8" .675 18 19<br />
1/2" .840 14 14<br />
3/4" 1.050 14 14<br />
1" 1.315 11.5 11 8 1.462 1.352<br />
1-1/4" 1.660 11.5 11<br />
1-1/2" 1.900 11.5 11 8 1.994 1.884<br />
2" 2.375 11.5 11 8 2.526 2.416<br />
2-1/2" 2.875 8 11 8 3.058 2.948<br />
3" 3.500 8 11 8 3.590 3.480<br />
4" 4.500 8 11 6 4.695 4.544<br />
5" 5.563 8 11<br />
6" 6.625 8 11<br />
8" 8.625 8<br />
10" 10.750 8<br />
12" 12.750 8<br />
ODM -- Outside Diameter of<br />
the Male<br />
IDF -- Inside Diameter of the<br />
Female<br />
TPI -- Threads Per Inch<br />
GHT (3/4") -- 1.0625 ODM,<br />
11-1/2 TPI<br />
NPT = National Pipe Taper<br />
BS = British Standard<br />
Normal Engagement Length of NPT Thread in Inches (A) *<br />
* Dimensions given do not allow for<br />
variations in tapping or threading.<br />
<strong>Sanitary</strong> Size ID of Fitting<br />
1/8" 1/4"<br />
1/4" 3/8"<br />
3/8" 3/8"<br />
1/2" 1/2"<br />
3/4" 9/16"<br />
1" 11/16"<br />
1-1/4" 11/16"<br />
1-1/2" 11/16"<br />
2" 3/4"<br />
<strong>Sanitary</strong> Size ID of Fitting<br />
2-1/2" 15/16"<br />
3" 1"<br />
4" 1-1/8"<br />
5" 1-1/4"<br />
6" 1-5/16"<br />
8" 1-7/16"<br />
10" 1-5/8"<br />
12" 1-3/4"<br />
Identifying Threads<br />
DIN knuckle threads for sanitary applications have a unique<br />
round shape making them easy to identify. There is a 30°<br />
included angle between the threads. There are 6 to 8 threads<br />
per inch for sanitary fittings. Measuring the ID of the round<br />
nut or the OD of the threads on the weld liner will help with<br />
identification. As <strong>Dixon</strong> <strong>Sanitary</strong> will be offering inch sizes, the<br />
best size identification is the OD of the tube.<br />
The threads for RJT fittings are British Standard Whitworth.<br />
These look similar to straight threads but have a 55° angle and<br />
small radii on the tips rather than the flat tips and 60° angle<br />
found on U.S. standard straight threads. There are 6 to 8<br />
threads per inch for the sanitary fittings.<br />
<strong>Dixon</strong> <strong>Sanitary</strong> <strong>2010</strong> 800.789.1718<br />
169<br />
U<br />
Technical