Dixon Sanitary 2010 Catalog

Pipe Fittings
Bradford Pipe Fittings
D
Pipe
Fittings
A Complete Pipe Clamp Connection
Ferrule
Clamp
Size range:
• 1" - 6" nominal pipe
Product Specifications
Materials:
• G = 304 stainless steel
• R = 316L stainless steel
• other alloys are available
Finish:
• 3A sanitary finish ID and OD
Gasket
Ferrule
Nominal
Pipe Size
Dimensions of Stainless Steel Pipe given in inches
Outside
Diameter
Nominal Wall Thickness
schedule 5S
schedule 10S
1" 1.32 .065 .109
1½" 1.90 .065 .109
2" 2.38 .065 .109
2½" 2.88 .083 .120
3" 3.50 .083 .120
4" 4.50 .083 .120
6" 6.62 .109 .134
This section contains pipe materials. Please note: in sizes from ½" through 12", pipe is known by its nominal inside diameter,
which differs from its actual inside diameter. To distinguish pipe sizes from actual measured diameters as used for tube, the term
iron pipe size (IPS) or nominal pipe size (NPS) are usually used. For all pipe sizes, the outside diameter (OD) remains constant;
the variations in wall thickness affect the inside diameter (ID).
Stainless steel schedule numbers from schedule 5S through schedule 80S are published in ANSI B36.19 for sizes through 12".
The addition of the letter "S" after the schedule number identifies it as pertaining to stainless steel.
Pipe size and Tube OD size materials are not interchangable
Index
Clamps............................................................................. 45
Ferrules.......................................................................45-46
Caps................................................................................. 46
Adapters........................................................................... 47
Hangers........................................................................... 48
Gaskets............................................................................ 49
44 800.789.1718
Dixon Sanitary 2010