Fluids - Febi

Antifreeze (red)
febi no. 80325 (1 litre)
febi no. 01381 (1.5 litres)
febi no. 22272 (5 litres)
febi no. 22274 (20 litres)
febi no. 12710 (60 litres)
febi no. 33830 (210 litres)
e.g. repl. no. G 012 A8D A1
febi 01381 is a longlife, antifreeze
and corrosion inhibitor for grey cast iron
and all-aluminium engines and meets
the requirements of VW, Audi, Seat
and Škoda with the following properties:
· Antifreeze down to -40° C – provides excellent
protection against corrosion and deposits.
· Raises the boiling point. As a result an even
discharge of heat is achieved.
· As little as 33% in the cooling system
provides adequate corrosion protection
and in addition frost protection down to
-22° C.
· Meets the specification VW TL 774 D (G12).
Properties Unit Test method
Density at 20° C 1.116 kg/cm³ DIN 51757
Flash point > 100 ° C DIN 51758
Ignition temperature > 400 ° C DIN 51794
Boiling point > 160 ° C ISO 2592
Viscosity 20° C < 15 mm²/s DIN 51562
Total volume Required quantity
of the cooling system in litres
Low-temperature protection
to -20° C to -25° C to -30° C to -35° C
3 l 1.0 l 1.2 l 1.3 l 1.5 l
4 l 1.4 l 1.6 l 1.8 l 2.0 l
5 l 1.7 l 2.0 l 2.2 l 2.5 l
6 l 2.0 l 2.4 l 2.7 l 3.0 l
7 l 2.4 l 2.8 l 3.1 l 3.5 l
8 l 2.7 l 3.2 l 3.5 l 4.0 l
9 l 3.0 l 3.6 l 4.0 l 4.5 l
10 l 3.4 l 4.0 l 4.4 l 5.0 l
12 l 4.0 l 4.8 l 5.3 l 6.0 l
14 l 4.7 l 5.6 l 6.2 l 7.0 l
16 l 5.3 l 6.4 l 7.1 l 8.0 l
18 l 6.0 l 7.2 l 7.9 l 9.0 l
20 l 6.7 l 8.0 l 8.8 l 10.0 l
Antifreeze (purple)
febi no. 19400 (1.5 litres)
febi no. 19402 (5 litres)
febi no. 22276 (20 litres)
febi no. 22278 (60 litres)
febi no. 33831 (210 litres)
e.g. repl. no. G 012 A8F A1
febi’s 19400 outstanding properties meet
and exceed the requirement of numerous
manufacturers and foreign standards.
. febi 19400 meets and exceeds the
requirements of many manufacturers and
foreign standards due to its outstanding
properties.
· Provides engines with excellent
protection against corrosion and
cavitation.
· Prevents deposits and foaming.
· Protects hoses and gaskets.
· Mixable with silicate-free antifreezes.
· Equates to VW antifreeze “G12 plus”
and is mixable with antifreezes 01089
(blue), 02374 (yellow), 01381 (red)
and the antifreezes of other brand
manufacturers.
Recommended applications
· ASTM D3306
· ASTM D4340
· ASTM D4985
· Ford ESE-M978B4H-A
· GM 1825M
· GM 1899M
· GM Saturn
· MAN 324 SNF
· MB 325.3
· NF R 15 601
· NATO S-759
· SAE J1034
· VW-TL 774 F
Properties Unit Test method
Density at 20° C 1.116 g/ml DIN 51757
Boiling point > 170 ° C ASTM D 1120
Solidification point 1:1 -38 ° C ISO 3016
Viscosity at 20° C < 15 mm²/s DIN 51562
Frost protection down to Proportion of Proportion of
antifreeze water
-38° C 50% 50%
26 27