reservations

• PA Series •
MODEL PA II ONE-PIECE RECURVE: The natural camouflage
of the “Graybark” birch laminations blends beautifully
with the gray of tree bark, trunks and limbs.
$1050
MODEL PA III ONE-PIECE RECURVE: The “Autumn Oak”
birch laminations have the same hue as the leaves of a
frosted oak during the fall whitetail hunting season.
$1050
MODEL PA V ONE-PIECE RECURVE: In the tropical jungles
of South America grows a tree that has earned the
common name of “Ironwood”. It is known for its amazing
strength, density and hardness (two to three times harder
than oak). We have chosen to use this rich, walnut
colored exotic wood in the riser of the PA V “Ironwood”
bow. It is, indeed, as tough as iron! To compliment and
match the toughness of the “Ironwood” riser in this bow
we are using vertically stacked, stained, bamboo laminations
in the limbs to further enhance feel and performance.
$1150
PA II
(Graybark)
PA III
(Autumn Oak)
PA V
(Ironwood)
PA X
(Zebrawood)
We have taken the design of our 50th Anniversary PGA bow and built the new PA onepiece
recurve. It has the same limb design and geometry of the PSA and PTF models.
The riser has slightly more mass weight than the PTF and looks more like a one-piece
PSA. Like the PSA and PTF, it has extended radiused shelf which makes it great for
the instinctive shooter who prefers shooting off-the-shelf. The outside edge of the
shelf is relieved to achieve good arrow flight off-the-shelf (see RECOMMENDED LIMB
LENGTHS).
MODEL PA X ONE-PIECE RECURVE: X stands for
“Exotic”! We can build your X bow with one of several
exotic woods of your choice (see page 1). This may
require some planning and discussion by phone, please
call us for details.
$1250
• DYNA FLEX TRAPEZOID LIMBS: 56", 58",
60" and 62". Vertically stacked, tapered
laminations reinforced with a red, woven
glass center core. Faced with transparent
fiberglass. Flemish-twist DynaFLIGHT 97
string.
• RISER: Deflex design. Reinforced with prestressed
multiple layers of red and black fiberglass.
Full 3 1/2 inch sight window cut 3/16 of an
inch past center. Extended radiused shelf.
Black Widow medallion inlay. Brass
inserts for side-mount quivers, sights or
stabilizer available at no additional charge
(please specify).
• BRACE HEIGHT: 8 1/4 to 9 inches (from
string to throat of grip).
• MASS WEIGHT: 2 3/4 pounds for 58" bow.
• FINISH: Sealed and protected in nonreflective
“Frost” (matte) clear marine epoxy.
All inserts are solid brass.
BOW COMES WITH:
#300. . . . Flemish-twist DynaFLIGHT 97 string
#306. . . . Bow stringer
#308. . . . Spider string silencers
#312. . . . Bow tip protector
#322. . . . Calf Hair shelf rest / strike plate
#332. . . . Nocking points
#900. . . . Owner’s Manual Companion DVD
#901. . . . Owner’s Manual
Total Value of $72
Black Widow inlay.
RECOMMENDED LIMB LENGTHS
PA SERIES
23" to 27" Draw → 56" Limbs
25" to 29" Draw → 58" Limbs
27" to 31" Draw → 60" Limbs
29" to 33" Draw → 62" Limbs
(Draw measured from string to far side of shelf)
At your draw length you may decide to opt for the
shorter limb that is a little more maneuverable or for
the longer limb that is slightly more comfortable.
The decision is yours.
See bow ordering information on page 4 for draw weight suggestions, available options, warranty and other important information.
PAGE 17