Rotary Saws

More documents

Recommendations

Info

MAINTENANCE INSTRUCTION Monthly Checks 1. Maintain a clearance of .020" at the spark plug gap on all Partnersaws. Clean plug as necessary or replace. 2. Remove the cutting blade and check the bearings on the arbor. The arbor should rotate freely, without roughness. If roughness is felt, the saw should be sent for repair. 3. Inspect the engine case for cracks or leaks. 4. Inspect the fuel assembly for leaks, cracked or soft fuel lines. DO NOT operate saw if there is a fuel leak.
MAINTENANCE INSTRUCTION Monthly Checks 5. Before replacing blade, check the condition of the blotters. Abrasive blades with damaged blotters should not be used. 6. Check the belt for condition and tension. If the belt is worn or frayed, replace. 7. If a tank of fuel has not been used in the previous 30 days, drain fuel and refill with fresh fuel.
Page 1 and 2: Rotary Saws
Page 3 and 4: Partner K 700 Active III • Displa
Page 5 and 6: SAFETY OPERATIONS The following saf
Page 7 and 8: SAFETY OPERATIONS • Particular ca
Page 9 and 10: USE OF BLADES Their uses include:
Page 11 and 12: Composition blades • There are tw
Page 13 and 14: Metal Cutting Blade • A compositi
Page 15 and 16: OPERATING TIPS To prevent the blade
Page 17 and 18: OPERATING TIPS • If used for vent
Page 19: MAINTENANCE INSTRUCTION Weekly Chec
Page 23 and 24: After Use 4. Check for loose or bar
Page 25 and 26: Mounting or Changing Blades 3. Blad
Page 27 and 28: Partner 4. Mount desired blade in p
Page 29 and 30: Partner Adjustment Procedures 4. Re
Page 31 and 32: Starting and Stopping 1. Hold saw f
Page 33 and 34: TROUBLE SHOOTING Saw will not start
Page 35 and 36: TROUBLE SHOOTING Blade Binds While
Page 37 and 38: TROUBLE SHOOTING Rough Running 1. C

Rotary Saws

Create successful ePaper yourself

Delete template?

Save as template?