Automation platform Modicon Premium

More documents

Recommendations

Info

Presentation Modicon Premium automation platform Unity processors 1 2 3 4 5 6 7 8 9 Presentation Modicon Premium TSX P57 pp4M, TSX P57 pp34M and TSX Hp4M automation platform processors manage the entire PLC station comprising: b b b b Discrete I/O modules Preventa safety modules Analog I/O modules Application-specific modules (counter, motion, weighing, communication) n The Premium processor offer has seen the addition of three new references: b TSX P57 6634M, high-end processor with 1 integrated Ethernet Modbus/TCP port and an internal 2 Mb RAM b TSX H57 24M/44M, which support the Hot Standby system (with "Primary" and "Secondary" PLCs), see pages 4/60 to 4/69 The processors differ in terms of their memory capacities, processing speeds, the number of I/O and the number of communication ports. Depending on the model, they include: b 1 to 16 racks interconnected by means of Bus X (max. distance: 700 m) b 192 to 2040 discrete I/O b 12 to 512 analog I/O b 4 to 64 application-specific channels. Each application-specific module (counter motion control, communication or weighing) accounts for one or more applicationspecific channels. b 1 to 4 networks (Ethernet Modbus/TCP, Fipway, Modbus Plus, Ethway), 1 to 8 AS‐Interface buses b 0 or 1 Fipio bus, 0 or 1 CANopen or Modbus Plus bus and 0 to 5 InterBus or Profibus DP (1) fieldbuses b 0 to 30 process control channels, with each channel capable of supporting up to 3 loops Depending on the model, Premium processors also feature: b A 10BASE-T/100BASE-TX Ethernet Modbus/TCP port (RJ45 connector) b A 1 Mbit/s Fipio bus link (bus manager) b Communication via 2 terminal ports (TER and AUX) using Uni-Telway or character mode protocol (typically a 19 or 115 Kbit/s programming terminal and an operator dialogue terminal) b A USB type TER port (for connecting a programming terminal) Each processor has two slots for a PCMCIA card: b An upper slot (no. 0) for battery-backed memory extension cards (program, symbols, constants and/or data files) b A lower slot (no. 1) for (1) a network card (Fipway, Modbus Plus) or bus (CANopen, Fipio Agent, Modbus, Uni-Telway and serial links). Memory extension cards intended specifically for storing data can also be inserted into this slot. Treatment for harsh environments n If the Modicon Premium automation platform is destined for use in extremely harsh environments, the "conformal coating" offer is available. This involves applying a coat of "humiseal 1A33" varnish to the electronic cards of the processor and power supply modules, I/O modules on Bus X and the racks. See page 9/2. Premium application design and installation The installation of these Premium processors requires: b Unity Pro Medium, Large or Extra Large programming software. This is the same as the software for installing the Modicon M340 and Modicon Quantum platforms. b Optionally, depending on requirements: v The Unity Application Generator (UAG) specialist software for modelling and generating process applications v Unity EFB toolkit software for developing EF and EFB libraries in C language v Unity SFC View software for visualizing and diagnosing applications written in Sequential Function Chart (SFC) or Grafcet language 10 ___________________________________________________________________________ (1) TSX H57 24M/44M Hot Standby processors do not support the following buses or networks: Fipio, CANopen, Modbus Plus, InterBus and Profibus DP. n New feature Description: pages 1/5 … Memory structure: pages 1/8… Characteristics: pages 1/10 … References: pages 1/12… PCMCIA references: pages 1/22 … 1/4
Description Modicon Premium automation platform Unity processors Description TSX P57 104M TSX P57 204M/304M 8 1 2 3 4 5 6 7 1 2 3 4 5 6 7 TSX P57 154M TSX P57 254M/354M/454M TSX P57pp4M processors without integrated Ethernet port TSX P57 1p4M single-format processors and TSX P57 2p4/3p4M double-format processors feature the following on the front panel: 1 A display block with 5 LEDs: v RUN LED (green): Processor in operation (program running) v ERR LED (red): Fault on the processor or its on-board devices (PCMCIA memory card and PCMCIA communication card) v I/O LED (red): Faults occurring on another station module or configuration fault v TER LED (yellow): Activity on TER or AUX terminal port v FIP LED (red): Activity on integrated Fipio bus (depending on model) 2 RESET button causing a cold restart of the PLC when it is activated 3 An 8-way female mini-DIN connector marked TER for connecting a programming or adjustment terminal (RS 485) 4 An 8-way female mini-DIN connector marked AUX for connecting a programming, adjustment or operator dialogue terminal (RS 485) 5 A PCMCIA slot (no. 0) for a memory card 6 A PCMCIA slot (no. 1) for a communication card or memory extension card for storing additional data 7 A 9-way SUB-D connector (on TSX P57 154/254/354M models) for Fipio bus communication (Fipio manager port) 8 An air recirculating heatsink (on TSX P57 0244/1p4M models) 1 2 3 4 TSX P57 0244M 7 1 2 3 4 5 6 Processor with integrated CANopen port The TSX P57 0244M processor feature all or some of the following: 1 A display block with 4 LEDs: v RUN LED (green): Processor in operation (program running) v ERR LED (red): Fault on the processor or its on-board devices (PCMCIA memory card and PCMCIA communication card) v I/O LED (red): Faults occurring on another station module or configuration fault v TER LED (yellow): Activity on TER or AUX terminal port 2 RESET button causing a cold restart of the PLC when it is activated 3 An 8-way female mini-DIN connector marked TER for connecting a programming or adjustment terminal (RS 485) 4 An 8-way female mini-DIN connector marked AUX for connecting a programming, adjustment or operator dialogue terminal (RS 485) 5 A PCMCIA slot (no. 0) for a memory card 6 A PCMCIA slot (no. 1) equipped with PCMCIA CANopen master V4.02 card, complete with cordset and tap junction (see page 5/65) 7 An air recirculating heatsink. 5 6 7 8 9 10 Presentation: page 1/4 Memory structure: pages 1/8 … Characteristics: pages 1/10 … References: pages 1/12 … PCMCIA references: pages 1/22 … 1/5
Page 1 and 2: Automation platform Modicon Premium
Page 3 and 4: . . . . all Automation & Control fu
Page 5 and 6: General Contents 6 - Software Unity
Page 7 and 8: Contents 1 - Modicon Premium proces
Page 9: TSX 57 2p processors and slot PLCs
Page 13 and 14: Description (continued) Modicon Pre
Page 15 and 16: Memory structure (continued) Modico
Page 17 and 18: Characteristics (continued) Modicon
Page 19 and 20: References (continued) Modicon Prem
Page 21 and 22: Presentation (continued) Modicon Pr
Page 23 and 24: Gateway, setup Modicon Premium auto
Page 25 and 26: Memory structure (continued) Modico
Page 27 and 28: References Modicon Premium automati
Page 29 and 30: References Modicon Premium automati
Page 31 and 32: TSX 57 3p processors TSX 57 4p proc
Page 33 and 34: Presentation (continued), descripti
Page 35 and 36: Characteristics (continued) Modicon
Page 37 and 38: References (continued) Modicon Prem
Page 39 and 40: Presentation (continued), reference
Page 41 and 42: Contents 2 - Racks, I/O architectur
Page 43 and 44: Characteristics Modicon Premium aut
Page 45 and 46: References, dimensions, mounting Mo
Page 47 and 48: Dimensions, mounting Modicon Premiu
Page 49 and 50: Description, functions Modicon Prem
Page 51 and 52: Dimensions, mounting Modicon Premiu
Page 53 and 54: Description, references Modicon Pre

Automation platform Modicon Premium

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?