PROOFMASTER S

More documents

Recommendations

Info

Lindholts Fourniturehandel ApS. | Sportsvej 6 | 8930 Randers NØ In addition, the 3 light-emitting diodes inform you about the status of the test. The functions of the 3 LED's are: • signal Glows yellow as soon as the sensor has been correctly lowered onto the watch. • I Test 1 good (green), poor (red) or uncertain (yellow). • II Test 2 good (green), poor (red) or uncertain (yellow). 2.2 PROGRAM SELECTION With the <strong>PROOFMASTER</strong> S you can select the optimum test program for testing a certain watch from 17 different programs. The programs P1 to P8 are predefined programs whose parameters are optimised for different watch types. These programs can not be changed. In the case of the customer-specific programs C01 to C10 you may determine the parameters in accordance with your requirements. Select the desired program by pressing the cursor button up or down several times. Press escape, if the instrument is not on the menu level for the program selection (e.g. on the menu level result display or parameter programming). P1 - Safe Test Test 1 -0.2 bar Test 2 + 2.0 bar Select: ↑↓ The number and the program name are displayed in the first line. The two test pressures are displayed in the second and third lines. Too high test pressure or vacuum can damage the watch being tested! Tlf. 86 42 52 99 | Fax 89 41 37 45 | lindholts@email.dk | www.lindholts.dk
2.3 PRESET PROGRAMS Lindholts Fourniturehandel ApS. | Sportsvej 6 | 8930 Randers NØ P1 - Safe Test Test 1 - 0.2 bar Test 2 + 2.0 bar P2 - Men Standard Test 1 - 0.4 bar Test 2 + 3.0 bar P3 - Ladies Test 1 - 0.4 bar Test 2 + 2.0 bar P4 - Hard Case Test 1 - 0.7 bar Test 2 + 3.0 bar P5 – Jewelery Test 1 - 0.2 bar Test 2 + 1.0 bar P6 – Diver 100m Test 1 - 0.7 bar Test 2 + 10.0 bar This program can be used with all types of water-resistant watches without risk of damages. This programme gives unreliable results with hard watches. Standard program for gent’s watches, plastic or metal. Program for small watches (lady’s watches). For hard, stable watches with ceramic case and mineral glass. For jewellery watches and other watches with less stable cases. Threefold test for diver watches that are specified for at least 100 m water depth. P7 – Pressure only Test 1 + 2.0 bar Pressure only, for quick tests. P8 - Two pressures Test 1 + 0.5 bar Test 2 + 3.0 bar C01 – C10 1 low pressure and a higher pressure (double pressure test). For watches that should not be vacuum tested. Test programs adaptable to your requirements. See Chapter 60H4 CUSTOMER - SPECIFIC PROGRAMS 2.4 POSITIONING THE WATCH The watch must be at ambient temperature for the test to be reliable. Results can be invalidated by variations in the watch temperature during the test. Test results can be invalidated by adhesive protection on the bottom or on the glass of the watch. Lift the sensor with knob A. When lifting the knob, the sensor is unlocked and can be freely moved up and down. Tlf. 86 42 52 99 | Fax 89 41 37 45 | lindholts@email.dk | www.lindholts.dk
Page 1 and 2: Lindholts Fourniturehandel ApS. | S
Page 9: Lindholts Fourniturehandel ApS. | S
Page 19 and 20: 4.7 TIGHTNESS LIMITS Lindholts Four
Page 21 and 22: 5.1 LANGUAGE SELECTION Lindholts Fo
Page 25 and 26: 6.5 TOLERANCE LIMIT Lindholts Fourn
Page 27 and 28: 6.8 DETRIMENTAL FACTORS IN TEST •
Page 29 and 30: 7.2 EMERGENCY RELEASE Lindholts Fou

PROOFMASTER S

Create successful ePaper yourself

Delete template?

Save as template?