BACKFLOW PREVENTERS

Accessories
Accessories
Backflow Preventers
Series IBVE-125
EPOXY COATED CAST IRON FULL PORT CLASS 125
FLANGED BALL VALVE
The new Conbraco Series IBVE-125 ball valves feature an FDA-approved, heat fused epoxy coating,
making them ideal for corrosive water service as well as food contact applications. They can be used
in place of any IBBM gate valve or plug valve.
With their full port design, these valves assure an unobstructed, turbulence-free flow that gate and
butterfly valves can’t match. Low profile handle for easy installation in tight places. Sizes from 21/2"
to 8". Rated 125 WSP, 200 WOG, with maximum operating temperature of 140°F.
MATERIALS
Body FDA Approved epoxycoated
cast iron
Seats PTFE
FEATURES
• Full port design offers superior
flow rate
• No bronze seat rings, disc rings or
stems to wear out
• Quarter turn offers instant, positive
shutoff with zero leakage
• Stainless steel ball resists corrosion
• Large actuator mounting pad
standard
• Handle indicates valve operation status
• Opens and closes easily, without
cheater bar
• Blowout-proof stainless steel stem
• PTFE seats and packing, not Nitrile
or EPDM
• Gear operator standard on 8"
• For more technical info ask for PHBRIRBV
brochure
Dimensions (in.) – Weights (lbs.)
Model # SIZE A B C D E WT./LBS
6Q20901 2-1/2" 7.5 7 5.9 16 1/2 NPT 34
6Q20001 3" 8 7.5 6.2 16 1/2 NPT 38
6Q20A01 4" 9 9 7 19.7 1/2 NPT 58
6Q20C01 6" 10.5 11 10.04 26 3/4 NPT 118
6Q20E01 *8" 11.5 13.5 15.85 - 3/4 NPT 345
NOTE: Gear operator standard on 8"
www.apollovalves.com
39