CLIP top BLUMOTION

Planning
Hinge dimensions and gap calculation based on factory setting (mounting plate spacing = 0 mm)
Hinge and door protrusion at full opening angle
Overlay application Dual application Inset application
F
Gap
Set mounting plate fixing position back by door
thickness + 1.5 mm
Drilling distance
Front overlay
Front overlay
Front overlay
5 7 8 9 10 11 12 13 14 15 16 17 18
0 3 4 5 6 7
3 3 4 5 6 7
6 3 4 5 6 7
9 3 5 6 7
Mounting plate
-4.5 -2.5 -1.5 -0.5 0.5 1.5 2.5 3.5 4.5 5.5 6.5 7.5 8.5
0 3 4 5 6 7
3 3 4 5 6 7
6 3 4 5 6 7
9 3 5 6 7
Mounting plate
-4 -3 -2 -1 0
0 3 4 5 6 7
3
6
9
Mounting plate
Minimum gap for doors with radiuses edges (R = 1 mm) based on factory setting
Door thickness
16 18 19 20 22 24 26 28 29 30 31 32
3 0.2 0.3 0.4 0.5 0.8 1 1.5 1.9 2.8 3.6 4.5 5.4
Drilling distance 4 0.2 0.3 0.4 0.5 0.7 1 1.4 1.8 2.5 3.1 4.0 4.8
5 0.2 0.3 0.4 0.5 0.7 1 1.4 1.8 2.3 2.7 3.5 4.3
Adjustments
max. ± 3.0 mm ± 2.0 mm + 3.0 mm
See mounting plates
- 2.0 mm
6 0.2 0.3 0.4 0.5 0.7 1 1.4 1.8 2.2 2.5 3.2 3.8
7 0.2 0.3 0.4 0.5 0.7 0.9 1.4 1.7 2.1 2.4 3.0 3.5
Additional for + 2 mm side adjustment
+0.1 +0.2 +0.2 +0.2 +0.3 +0.4 +0.4 +0.5 +0.4 +0.4 +0.4 +0.3
Screw-on INSERTA / knock-in assembly Hinge boss dimensions
27