Hydraulic Valves Industrial Standard

Catalogue HY11-3500/UK
Characteristics
The D1MW is based on the D1VW series of directional
control valves size NG06, but offers additional corrosion
protection of the valve body, the solenoid coil and the
anchor tube as well as the typical solenoid con nections
for the mobile market such as AMP Junior Timer and
DT04-2P “Deutsch”.
Technical features
• High corrosion protection (optional)
• Solenoid connection:
- Standard (as per EN175301-803)
- AMP Junior Timer
- DT04-2P “Deutsch”
• Robust design for rough applications
• Extended manual override with rubber cover (optional)
Directional Control Valve
Series D1MW
With AMP Junior Timer
2
A
B
Technical data
Connector DT04-2P “Deutsch”
General
Design
Directional spool valve
Actuation
Solenoid
Size
DIN NG06 / CETOP 03 / NFPA D03
Mounting interface
DIN 24340 A6 / ISO 4401 / CETOP RP 121-H / NFPA D03
Mounting position
Unrestricted, preferably horizontal
Ambient temperature [°C] -25...+50
MTTF D
value [years] 150
Weight
[kg] 1.5 (1 solenoid), 2.1 (2 solenoids)
Hydraulic
Max. operating pressure [bar] P, A B: 350; T: 210
Fluid Hydraulic oil in accordance with DIN 51524 / 51525
Fluid temperature [°C] -25 ... +70
Viscosity permitted [cSt] / [mm²/s] 2.8...400
Viscosity recommended [cSt] / [mm²/s] 30...80
Filtration ISO 4406 (1999); 18/16/13 (meet NAS 1638: 7)
Flow max.
[l/min] 80 (see shift limits)
Leakage at 50 bar
[ml/min] Up to 10 per flow path, depending on spool
Static / Dynamic
Step response at 95%
[ms]
Energized: 32
De-energized: 40
Electrical characteristics
Duty ratio
100% ED; CAUTION: coil temperature up to 150 °C possible
Max. switching frequency [1/h] 15000
Standard (as per EN175301-803) IP65 in acc. with EN60529 (with correctly mounted plug-in
Protection class
connector)
AMP Junior Timer IP67 in acc. with EN60529 (with correctly mounted plug-in connector)
DT04-2P “Deutsch” IP69K (with correctly mounted plug-in connector)
Code K J
Supply voltage [V] 12 V = 24 V =
Tolerance supply voltage [%] ±10 ±10
Current consumption hold [A] 2.72 1.29
Power consumption hold [W] 32.7 31
Solenoid connection
Connector as per EN 175301-803 (code W), AMP Junior Timer (code A),
DT04-2P “Deutsch“ connector (code J). Solenoid identification as per ISO 9461.
Wiring min.
[mm²] 3 x 1.5 recommended
Wiring length max.
[m] 50 recommended
With electrical connections the protective conductor (PE W) must be connected according to the relevant regulations.
D1MW UK.INDD RH 06.09.2011
2-35
Parker Hannifin Corporation
Hydraulics Group