GAL - Geppert-Band GmbH

Stainless Steel Flat Belt Conveyor
GES - 25 - UA
with central drive position
The central drive of the GES-25-UA can be positioned anywhere along the length of the
conveyors frame. Both ends are left free, so that an integration in existing product lines
becomes easy.
These ends can either have a knife edge roller with only 8 mm diameter or they are equipped
with rollers of 30mm diameter. This roller can additionally have a flip-up system that allows very
easy cleaning under the belt.
The GES-25-UA, like all stainless steel conveyors from GEPPERT-Band,
is completely made of stainless steel. The patented Clean-Tec system
makes it the ideal solution for chemical, pharmaceutical and food-stuff
applications. The very high demands for cleanliness and hygiene in these
areas are fully met, because all moving parts and open threads on the mechanics of the
adjustment for the belt are sealed inside the conveyor. Therefore almost no contamination can
accumulate on these parts.
On the photo above the GES-25-UA is shown with two double uprights in stainless steel.
Shorter versions can also be equipped with a single column upright as shown on page 27. That
single column upright is also available in a version on security rollers with breaks.
25
CleanTec
�
page 4