RIB-ROOF

Direct installation of the clips
No pre-assembly necessary
Using the RIB-ROOF standard clip you can pull up.
On your marks, get set, go! With RIB-ROOF metal
roofing systems you can use the single clips to save
time otherwise spent on extensive measuring and
pre-assembly. The uniquely developed sliding clip
is screwed directly into the profile sheet. Fast work
is possible. Mistakes in measuring are avoided.
RIB-ROOF metal roofing systems always provide
different optimal clamping applications. The optimised
Profile-Clip geometry stays in place perfectly
no matter the type of roof construction or substructure
under each sheet. In this way, material expansion
caused by possible changes in temperature can
be balanced out. This is a superior advantage of the
RIB-ROOF system when laying long sheet panels.
While others are still flanging, you can already see the result.
All you need to install RIB-ROOF metal roofing
systems are hands that can tackle work. It is
not necessary to join the standing seams again
neither a mechanical flanging is necessary. This
makes it possible to install the roofs perennial.
Furthermore the profile sheets are not rigidly
coupled so a thermal expansion is possible.
You can be absolutely sure that your RIB-ROOF roof
will keep the shape over years.
8
Have a closer look at
installation principle RIB-ROOF Speed 500.
Watch the following video clip:
Direct link for mobile phones
with QR-code application