IPC. Your expert partner for granules and pellets. - Glatt

More documents

Recommendations

Info

Bottom Spray Coating. For high-quality films for the controlled release of ingredients, the film solution is sprayed onto the product via a nozzle in the bottom of the container. The product continually passes through a Wurster column positioned around the nozzle, guarantee- ing even encapsulation of every particle. The fine atomisation of the coating solution and the particular layout of the nozzle means that even the finest particles of around 50 µm can be enclosed, in contrast to Top Spray Coating. 4 Principles of bottom spray coating Bottom spray coater product container Bottom spray coating in the GVW 32" Pellet with various coatings
Pelletisation. Compact particles are created by wet granulation, extrusion and subsequent spheronisation. Subsequent drying and possible coating of the pellets is carried out efficiently in the fluidised bed. Vertical Granulator Principles of pellet manufacture Material container for fluidised bed drying Wet granulation in the vertical granulator VG 800 Extruder Spheroniser Emptying of the spheroniser 5
Page 3 and 4: IPC. Your expert partner for granul
Page 5: Fluidised bed granulation. Fine pow
Page 9 and 10: IPC. Staying ahead through service.

IPC. Your expert partner for granules and pellets. - Glatt

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?