SIGNET_Catalog

rsreklameskilt

SIGNET Sign System was created by Lennart Hedlund in the early

1990’s and introduced to the European sign market in 1995 with

great success. Today, SIGNET Sign System is distributed in more

than fifty countries worldwide. SIGNET Sign System is a secondgeneration

family owned and operated company, located in

Gothenburg, the second largest city in Sweden.

SIGNET Sign System - Catalog 2 May 2015


Table Of Contents

CLASSIC

TOTEM

SLIM

MAGNETIC

SIGNS

FLEXI

TACTILE/

BRAILLE

CONVEXA

SIGNET

DEMO KIT

ELEGANCE

PROFILE

SPECIFICATIONS

With first class products manufactured in Scandinavia, professional service

and fast delivery, we guarantee customer satisfaction!


- a unique timeless modular slide-down sign system


CLASSIC

CLASSIC is a unique flat modular slide-down system in anodized aluminium which

consists of side profiles and SIGNET double sided profiles: one side has rails for

removable slide-in inserts, and the other side is flat for applying text or graphics.

Inserts can be made of paper, plastic, aluminium, tactile/braille, and other suitable

materials.

.

SIGNET double sided profiles can be used in different applications either as:

slide-down system with railed side out for inserts

slide-down system with flat side out for vinyl text or graphics

magnetic click system with railed side out for inserts

magnetic click system with flat side out for vinyl text or graphics

SLIM sign with exchangeable information

CLASSIC can be delivered in up to 2,9m lengths or as customized signs for all

visual communication such as floor, elevator and information signs etc.

CLASSIC can also be integrated with our other systems SLIM, CONVEXA

or TOTEM.

.

CLASSIC

Sign Applications

portrait or landscape

indoor or outdoor

double sided

EASY SLIDE

tactile/braille

directory sign

office sign

hanging (suspended) sign

desk sign

flag sign

elevator sign

pictogram

information and planning board

exchangeable information on TOTEM

unlimited sign applications

5


6

1


CLASSIC SIGN

L-30 = 474mm (profiles=485mm)

1.

2.

3.

4.

Cut the profiles in preferred lengths. L-30

has to be cut shorter than the other profiles

(see drawing above).

Assemble the frame with S-12 A and L-30 B.

Fix double sided acrylic tape or glue to the

back side of L-30 and attach L-30 to the bottom

of the S-12 profiles C.

Stabilize the frame by adding an aluminium

support bar at the top D. For larger signs,

stabilize the frame by adding more support bars,

or a whole aluminium sheet.

Slide down the double sided profiles E into the

frame with either the flat or the railed side out.

5. Close the sign with end caps, top and bottom F.

SIGNET double sided profile

S-12 Side profile

Tape L-30 Stopper Tape

1. CLASSIC wall mounted Directory Sign (500x400mm). Slide-down system using S-12 side profile,

profiles 20-1, 25-4 and 20-2 with flat side out for vinyl text, and L-30 profile on the bottom.

7


1

3

2

1.

2.

3.

4.

CLASSIC Office Sign, (210x166mm). Slide-down system using S-7 side profile, profiles 60-1 and

25-1 with flat side out for vinyl graphics, 35-1 with railed side out for inserts, and L-30 profile on the

bottom.

CLASSIC Office Sign (210x161mm). Slide-down system using S-12 side profile, profiles 60-1 and

35-1 with flat side out for vinyl graphics, 20-1 with railed side out for inserts, and L-30 profile on the

bottom.

CLASSIC wall mounted Building Floor Directory Sign (500x600mm). Slide-down system using

S-25 side profile, profiles 60-1, 20-1 and 40-1 with flat side out for vinyl graphics, and L-30 profile

on the bottom.

CLASSIC wall mounted Building Floor Directory Sign (500x770mm). Slide-down system using

S-7 side profile, profiles 40-1 with railed side out for inserts and SL-5 with flat side out for vinyl

graphics, and L-30 profile on the bottom.

8


4

9


1

2 1. Magnetic Directory Board (2000x2500mm).

Click system using SM-35 side profile

and profile 50-1 with railed side out for

inserts mounted with magnetic tape and

integrating a CONVEXA C7 profile as the

header.

2. CLASSIC Building Entry Doorbell Sign

(500x600mm). Slide-down system using

S-12 side profile, profiles 25-4 with flat

side out for vinyl graphics, and 35-1 with

railed side out for inserts, and L-30 profile

on the bottom.

10


Standard or custom designed signs -

the choice is yours!

1

CLASSIC Door Sign, white

painted, (210x115mm)

using S-7, 50-1, 25-1,

20-1 and L-30.

4

CLASSIC name and Whiteboard

Sign with pen and eraser with

magnet (210x275mm) using profiles

35-1, 20-1, SL-4, S-7 and L-30.

Whiteboard (210x200mm) made of

genuine enamel-coated sheet.

5

Flag Sign (170x50mm) using

FL-40, 50-1 and U-14 profiles.

Flag Sign (170x60mm) using FL-40,

35-1, 20-1 and U-14 profiles.

35-1 profile as header with flat side

out for vinyl text and 20-1 with railed

side out for exchangeable slide-in

insert.

2

Flag Sign (120x83mm) using FL-40,

U-14 and 80-1 with railed side out

for exchangeable slide-in inserts.

6

CLASSIC Name plate (215x50mm)

using profiles S-12, 25-1, 20-1 andL-30.

3

CLASSIC Slide-down system

using S-7 side profile, SIGNET

double sided profiles with flat

side out for vinyl graphics and

L-30 on the bottom.

7

CLASSIC Door Sign (200x130mm).

Slide-down system using S-7, 50-1,

25-1 and L-30.

11


CLASSIC FLAG SIGN

1.

2.

3a.

Cut the SIGNET double sided profiles (here 20-2)

in preferred lengths.

Cut the flag profiles FL-40 and U-14 in a length that

corresponds to the width of the 20-2 profiles (44,8mm).

To use the railed side out of the 20-2 profiles for

removable inserts (as illustrated above):

- Attach double sided foam tape vertically on the

flat side of one of the 20-2 profiles A.

- Assemble the 20-2 profiles together.

Tape

3b.

To use the flat side out of the 20-2 profiles for text:

- Cut a piece of 3mm thick PVC to fit inside the

railed side of the profile and attach double sided

acrylic tape vertically on both sides of the PVC.

- Press the railed sides of the 20-2 profiles together.

- Skip step 5

Profil

U-14

End caps for flag sign

Tape/glue

FL-40

Flag profile

4.

5.

6.

Put glue inside the track C of the FL-40 B and push

in the double sided profiles into FL-40 C.

Slide in the inserts D. Inserts can be made of paper,

plastic, aluminium, engraved, tactile/braille, digital

material, or any other fitting material.

Close the flag sign with the U-14 profile E. For better

adherence, apply double sided tape inside of the U-14

profile. Attach to the wall with either screws or double

sided foam tape.

12


EASY SLIDE Document Holder

EAextremely easy to use and neat document holder for any paper- or laminated

document. EASY SLIDE is suitable for all visual communication at for e.g.

hospitals, universities, offices, building entries, restaurant kitchens etc.

EASY SLIDE consist of a CLASSIC side profile S-25, cut in preferred length, end

caps and rubber and can be delivered in up to 2,9m lengths. SY SLIDE is an

ATTACH

REMOVE

1.

2.

How does an

EASY SLIDE work?

Insert the document in the groove, back of the rubber

strings. The document will automatically be locked by

the friction.

Hold the document with both hands, and move the

document slowly to the left or right and obliquely

down. The EASY SLIDE will easily let go of the document

when the pressure is removed.

13


- a revolutionary ultrathin sign system


SLIM

SLIM is a slender designed sign system in anodized aluminium and one of the

thinnest on the market at only 5,5mm for indoor and outdoor use.

SLIM is available in standard paper sizes, or suitable for customized signs for all

visual communication such as floor, elevator and information signs etc.

Easily replaceable inserts are popped out with a suction cup, and can be made

of paper, plastic, aluminium, tactile/braille, and other suitable materials and in

combination with anti-reflective plastic covers.

SLIM consists of SIGNET double sided profiles, one side has rails for exchangeable

inserts, and the other side is flat for vinyl text/graphics, and is delivered either in up

to 2,9m lengths, or already-made signs.

SLIM can be integrated with our other systems CLASSIC, CONVEXA or TOTEM.

.

SLIM

Sign Applications

portrait or landscape

indoor or outdoor

double sided

tactile/braille

directory sign

office sign

hanging (suspended) sign

desk sign

flag sign

elevator sign

pictogram

information and planning board

exchangeable information on TOTEM

unlimited sign applications

15


1

1. . Directory Sign on an anodized aluminium sheet integrating A4 standard SLIM signs and a CLASSIC

slide-down sign using side profile S-7, profiles 50-1 with flat side out for text and L-30 on the bottom.

How to build a SLIM sign

larger than A4

Plastic cover

Paper

Tape

Sheet

1.

Cut the profiles CH-35 and L-30 in a length corresponding

to the size of your insert. Prepare a sheet of aluminium or

stiff plastic (1.0 mm) in the same size as your insert.

2.

3.

Assemble the frame by putting double sided acrylic tape

on the back of the CH-35 profiles and attaching them to

the sheet A.

Attach the L-30 profiles on the back of the frame with

double sided acrylic tape B. For an enhanced appearance

bevel the edges of the L-30 profile C.

Tape/glue

4.

Place your insert and a plastic cover into the frame. The

insert can be made of paper, plastic, aluminium, engraved,

digital, or tany other suitable material.

16


1

1 . SLIM Wayfinding Sign (420x450mm) using profiles 80-1

(420x80mm) with flat side out, CH-35 in A3 size (420x297) with

tracked side out for paper insert and anti-reflective plastic cover,

40-1 (420x40mm) with tracked side out for tactile/braille insert,

and 30-1 (420x30mm) with flat side out, all assembled with L-30

as side profile.

2

2.

SLIM Sign SL-4 (210x165mm) with divider (3mm). Paper print for

name (210x50mm) and other information (210x112mm) can easily

be installed and are protected by an anti-reflective plastic cover.

To remove and change name and information can easily be done

with a suction cup.

17


SLIM standard or customized?

SIGNET double sided profiles. One side

is railed for easily replacing inserts and

plastic cover, with a suction cup. Inserts

can be made of paper, plastic, aluminium

tactile/braille, and other suitable

materials. The other side is flat for text

or graphics.

All profiles are available in up to 2,9 meter lengths.

SLIM - ultrathin double sided system - only 5,5mm!

1 2

1.

SLIM Sign SL-5 (148x148mm) with divider (3mm)

using 60-1 (148x62mm) with flat side out for print

and SL-5 (148 x 83mm) for paper and plastic cover.

2.

SLIM Sign (210x210mm) using 40-1, 50-1 and

60-1 with L-30 profile on the sides.

3.

4.

SLIM Flag Sign (148x148mm) using FL-70, SL-5

and L-30.

SLIM Sign SL-4 (210x297mm) with divider (3mm).

Paper print for name (210x50mm) and other

information (165x147mm).

4

5.

SLIM Sign SL-4 (210x165mm) with divider

(3mm). Paper print for name (210x50mm) and

other information (210x112mm).

3

5

18


1 SLIM A3 size 2 SLIM A4 size

(297x420mm) using (210x297mm) using

CH-35 and L-30. SL-4 and L-30.

3 SLIM A5 size

(148x210mm) using

SL-5 and L-30.

SLIM

standard or customized?

4 SLIM (180x80mm)

using 80-1 and L-30.

5 SLIM (180x70mm)

using 70-1 and L-30.

6 SLIM (160x60mm)

using 60-1 and L-30.

7 SLIM Flag Sign SL-5

(148x148mm) using FL-70,

SL-5 and L-30.

8 SLIM Desk Sign (200x50mm)

using D-50.

9 SLIM Flag Sign (210x297mm)

using FL-70, SL-4 and L-30.

10

SLIM “Open / Closed” Sign

(150x50mm) using 50-1 and L-30.

11 SLIM “Open / Closed” Sign

12 SLIM Whiteboard Sign

(150x100mm) using 50-1 and L-30. (148x210mm) using SL-5,

L-30 and a 3mm divider.

13 SLIM Pictogram (105x105)

using SL-6 and L-30.

19


SLIM Information Board

Information Boards to entrances and elevators with sign

holders for exchangeable information.

1

2

1.

Information Board for properties (1500x405mm) on a bended

anodized aluminium sheet, integrating six standard SLIM A4

signs for exchangeable information.

2.

Information Board for properties (550x750mm) on a bended

anodized aluminium sheet, integrating four standard SLIM A4

signs for exchangeable information.

3

3. Elevator mounted Information Board

(770x400mm) on an anodized aluminium

sheet, integrating three standard SLIM

A4 signs for exchangeable information.

20


SLIM with tactile/braille

1

2

3

5

4

1.

2.

3.

4.

5.

Magnetic sign (260x120mm). Click system using SM-35

side profile and profile 60-1 with railed side out for

tactile/braille inserts, mounted with magnetic tape.

CLASSIC Office Sign (200x75mm). Slide-down system

with tactile/braille inserts using S-12, 35-1 and L-30

profiles.

SLIM Pictogram (148x148mm) using profile SL-5 with

railed side out for tactile/braille insert and profile L-30

as end caps.

SLIM Freestanding Wayfinding tactile/braille Sign

(600x600mm) using profiles CH-35 and L-30 with a T-95

pole and base plate.

SLIM tactile/braille sign (500x800mm) using profile

CH-35 with railed side out for tactile/braille insert and

profile L-30 as end caps.

21


MAGNETIC SIGN

Magnetic strip

3mm PVC with tape/glue

70-1 profile

40-1 profile

50-1 profile

Double sided profile with

flat side out for text

SM-35 profile

Plastic insert with text

Magnetic strip

Double sided profile with

railed side out for insert

70-1 profile

Double sided profile, railed side out

Magnet side profile

SM-35

Steel plate

Magnetic

tape

Tape/glue

Suction cup

Magnet tape on roll

1.

2.

Cut the double sided profiles in preferred length and

prepare a steel plate sheet in size corresponding to the

profiles. Cut two pieces of SM-35 matching the height

and one piece of SM-35 matching the width of the steel

plate sheet.

Cut 45 degree angles on both sides of the shorterSM-35

profile A and on one side on the longer SM-35 profiles B.

3. Put double sided acrylic tape on the SM-35 profiles C.

4.

5a.

Assemble the frame by attaching the steel plate sheet to

the SM-35 profiles.

Put adhesive magnetic tape on the back of the double

sided profiles where the railed side is used for text inserts

D and attach to the frame.

Steel plate

5b.

On the double sided profiles where the flat side is used

for text the adhesive magnet tape needs to be put on 3

mm PVC before attached to the back of the profile E.

Tape/glue

6.

The plastic inserts for text used with the railed side of the

double sided profiles can be divided for easier change of

individual names G.

7. Remove individual profiles easily from the sign with

a suction cup H.

22


1

2

1. Magnetic Information Sign (400x630mm)

using profiles 70-1 (400x70mm) and 40-1

(400x40mm) with flat side out, and CH-35

(400x400mm) mounted with magnetic tape.

3

2.

3.

Magnetic click system Directory Sign (500x730mm)

using SM-35 side profile, profiles 70-1, 40-1 and

50-1 profiles with flat side out for text, mounted

with magnetic tape.

Magnetic click system Directory Sign (550x740mm)

using SM-35 side profile, profiles 40-1 and 60-1 with

flat side out for text, mounted with magnetic tape.

The profiles can easily be popped out with a suction cup.

23


- an innovative multi - purpose framing system


FLEXI

FLEXI gives you a brand newly designed complete profile framing system in

aluminium that covers a wide variety of sign applications such as hanging signs,

wall mounted signs, flag signs, and pylons.

FLEXI is a stylish and extremely flexible system with a Scandinavian design and

is suitable for all visual communication for indoor and outdoor use. Inserts can

be made of paper, plastic, PVC or aluminium, and is very easily exchanged.

FLEXI system consists of two profiles: H-20 side profile for the top and bottom,

and HC-20 end cap profile for completing the frame. FLEXI is delivered in up to

2,9m lengths, or as customized signs.

.

FLEXI Sign Applications

portrait or landscape

indoor or outdoor

double sided

tactile/braille

directory sign

office sign

hanging (suspended) sign

desk sign

flag sign

elevator sign

pictogram

information and planning board

pylon

unlimited sign applications

25


1

26


2 3

1.

SIGNET Sign System carries a variety of hanging accessories.

2.

3.

FLEXI hanging double sided Wayfinding Sign (900x300x20mm) using profiles H-20 and HC-20,

attached to the ceiling with SIGNET hanging accessories.

FLEXI Flag Sign ((210x210x20mm) using profiles H-20 and HC-20. The sign is mounted using

another HC-20 profile screwed to the wall, through 10mm square tubing spacers.

4.

FLEXI hanging signs are available in different sizes.

4

4

To change the text or graphic; simply remove the HC-20 end cap

and slide in a new insert. When the insert is made

of plastic you can also easily pop out the insert with a suction

cup, without removing the HC-20 end cap.

27


1

FLEXI SIGN

1.

Cut the FLEXI H-20 profiles in preferred lengths A.

2.

3.

4.

To stabilize the sign, cut two support bars of e.g. 10mm PVC into the desired width of

the sign B. Mount the support bars with glue or with pop rivets.

Cut the HC-20 profiles in a lengths equal to the width of the sign C and attach the end caps

HC-20 with screws D.

Before assembling the last end cap, slide an insert into the profiles H-20 E. Inserts can be

made of paper, plastic, aluminium, engraved, or digital material, or any other fitting suitable

material.

The FLEXI H-20 profile can also be used to build a whole frame by cutting the H-20 profiles

in 45 degree angles, e.g. when building a pylon, see page 30.

28

1.


2

1.

FLEXI wall mounted Wayfinding Sign (500x350mm) using profiles H-20 and HC-20.

2.

FLEXI Freestanding Pylon Sign (300x1100x20mm) using profiles H-20 and

HC-20 with a 10mm thick steel base.

29


- a stylish curved sign system


CONVEXA

CONVEXA is an easy-to-use, curved aluminium profile system suitable for day to

day information changes. CONVEXA comes in six different sizes corresponding

to international standard paper sizes for inserts A3-A8 (C3-C8). It is very easy to

handle and can be mounted directly to the wall, used as a hanging sign, flag sign,

pylon or as a magnetic click system.

CONVEXA is suitable for all visual communication for indoor and outdoor use.

Easily replaceable inserts are popped out with a suction cup, and can be made

of paper, plastic, aluminium, tactile/braille, and other suitable materials, or in

combination with anti-reflective plastic covers.

CONVEXA can be delivered in up to 3m lengths or in standard- or customized

signs and can be integrated with our other systems CLASSIC, SLIM, or TOTEM.

.

CONVEXA Sign Applications

portrait or landscape

indoor or outdoor

double sided

tactile/braille

directory sign

office sign

hanging (suspended) sign

desk sign

flag sign

elevator sign

pictogram

information and planning board

exchangeable information on TOTEM

pylon

unlimited sign applications

31


1

1.

2.

3.

CONVEXA hanging double sided Wayfinding Sign (1100x210mm) using profile C4,

attached to the ceiling with SIGNET hanging accessories.

CONVEXA hanging double sided Wayfinding Sign (600x105mm) using profile C6,

attached to the ceiling with SIGNET hanging accessories.

CONVEXA wall mounted sign (800x210mm) using profile C4.

32


CONVEXA sign

End Caps

Screw or double sided tape

on the backside of the profile

CONVEXA profile C3

CONVEXA profile C3

Aluminium insert

1.

2.

3.

4.

5.

Cut the C3 profile and the insert in preferred length.

For fixation to the wall, drill holes in the track A.

Put the insert into the C3 profile B. As insert use paper, plastic,

aluminium, engraved or digital material or any other fitting material.

Fix the end caps with screws C.

Attach to the wall with either screws or double sided foam tape.

2 3

33


34

1


2

1.

CONVEXA wall mounted Information Sign (500x850mm) using C5 and C8 profiles, mounted on

an aluminium sheet.

2.

Anodized aluminum sheet (510x950mm) with C7 (500x79mm) profiles mounted on a glass door

with double sided tape.

35


CONVEXA Flag Sign

CONVEXA flag signs can be constructed in a wide

range of sizes, simply integrate the FL-70 flag profile

with any CONVEXA profile (C3-C8).

End Caps

End Caps

CONVEXA profiles C5 FL-70 Flag profile

FL-70 Flag profile

1.

Cut the C5 profiles, the inserts and the plastic covers

in preferred lengths. Cut the FL-70 profile in a length that

corresponds to the width of the C5 profiles.

CONVEXA profiles C5

CONVEXA profile C5

Tape/Glue

2.

3.

Attach double sided acrylic tape horizontally on the FL-70

profile A or run two parallel strips of the tape along the top

and bottom edge of the back side on one of the C5 profiles.

Attach the C5 profiles to FL-70. (For larger flag signs, attach

the profiles to FL-70 with screws, fixed in the track of the

CONVEXA profiles (C3-C8)).

Install the inserts B into the C5 profiles. Inserts can be made

of paper, plastic, aluminium, engraved, tactile/braille, digital

material, or any other suitable material.

4.

5.

Close the flag sign with end caps C.

Attach to the wall with either screws or double sided foam tape.

Showcasing Hospital Applications

1.

2.

3.

CONVEXA wall mounted Directory Sign (900x750mm) using profile C6.

CONVEXA hanging double sided Directory Sign (900x450mm) using profile C6 with SIGNET

hanging accessories.

Wall mounted Information Sign (800x1000mm). Magnetic click system using SM-35 side profile

and profile 35-1 with railed side out for inserts mounted with magnetic tape, integrating

a CONVEXA C5 profile as the header. To the right a CONVEXA A4 size (210x297mm) using profile C4.

36


1

2

3

37


1

1. CONVEXA freestanding lighted Directory Sign (2800x2200mm)

integrating C8 profiles (900x53mm) with exchangeable plastic inserts.

38


1

2

1.

Convexa freestanding Directory Sign

(1947x1888mm) using C4 profiles

(870x210mm).

2. CONVEXA wall mounted Directory

Sign (800x215mm/profile) using profile C4.

39


CONVEXA Profile Specifications

size of insert visible surface/mm size of profile/mm

40


CONVEXA - standard or customized?

CONVEXA signs are designed to use replaceable

inserts made of paper, plastic, aluminium, engraved,

tactile/braille, digital material, or any other suitable

materials together with anti-reflective plastic or

aluminium covers and plastic end caps.

1

CONVEXA A3 size

(297x420mm) using

C3 profile.

2 CONVEXA A4 size 3 CONVEXA A5 size 4

(210x297mm) using (148x210mm) using

C4 profile.

C5 profile.

CONVEXA double sided Flag Signs

(200x53mm and 220x74mm)

using profiles FL-70 with C8 or C7.

5 CONVEXA Pictogram

6

(105x105mm) using C6 profile.

CONVEXA Desk Sign (150x53mm)

using profiles D-48 and C8.

7 CONVEXA sign (170x74mm) 8 CONVEXA sign (150x53mm) 9

using C7 profile.

using C8 profile.

CONVEXA “Open / Closed” sign

with C8 profile (180x53mm).

41


- an elegant curved larger - sized sign system


ELEGANCE

ELEGANCE is an elegant, stylish curved profile system in anodized aluminium

allowing you to build signs in suitable sizes with either wooden or aluminium

end caps. This system adapts the rounded shape of the end caps, and is also

used like a normal CONVEXA sign, but in larger dimensions.

Easily replaceable inserts are popped out with a suction cup, and can be made

of paper, plastic, aluminium, PVC, and other suitable materials.

ELEGANCE is delivered in up to 2,9m lengths, or in customized signs, and is

suitable for all visual communication for indoor and outdoor use.

.

ELEGANCE

Sign Applications

portrait or landscape

indoor or outdoor

directory sign

office sign

hanging (suspended) sign

elevator sign

pictogram

information and planning board

unlimited sign applications

43


FLEXI Sign

Insert

Support double sided profile

Support profile 350mm

Insert 395mm

ES-45 end caps 400mm

End caps in wood or aluminium

Insert

Support double sided profile

1.

2.

3.

4.

5.

6.

Cut the ES-45 and EH-20 profiles in preferred lengths.

Screw the ELEGANCE end caps to the ES-45 profile A.

Cut the supports, SIGNET double sided profiles, in suitable lengths

and use as supports.

Attach the supports inside the frame with double sided acrylic tape B.

For larger signs, add more supports or a whole aluminium sheet.

To stabilize the front, screw the EH-20 profile in the middle of the end

caps C. Put the inserts into the frame D. The length of the inserts is a

few millimeters shorter than the end caps.

Attach the frame to the wall with screws.

44


1

2

1.

ELEGANCE Entry Sign (600x850mm) using side

profile ES-45 and profile EH-20 with exchangeable

aluminium inserts in two sizes and aluminium end

caps (600mm).

2.

ELEGANCE Directory Sign (500x750mm) using side

profile ES-45 and profile EH-20 with exchangeable

aluminium inserts in different sizes and aluminium

end caps (500mm).

45


1

2

1.

ELEGANCE Information Sign (1000x500mm) using side

profile ES-45, and profile EH-20 with exchangeable

aluminium sheet and aluminium end caps (500mm).

2.

ELEGANCE sign with dividers using side profile ES-45

and profile EH-20 with black plastic dividers between the

exchangeable aluminium inserts shown here in two sizes,

with wooden end caps.

The ELEGANCE end caps

are available in seven different

sizes in wood or aluminium.

46


1

1.

ELEGANCE Information Sign

(400x630mm) using side profile ES-45

and stabilization profile EH-20 with

exchangeable aluminium inserts and

aluminium end caps (400mm).

2.

ELEGANCE Company Signs

(2000x1000mm) using side profile

ES-45 and stabilization profile EH-20

with an aluminium sheet as front.

2

47


- a flat or curved freestanding sign system


TOTEM

TOTEM is developed for large or small

freestanding signs in aluminium, indoor

and outdoor.

A TOTEM front can be either flat or curved

without or with exchangeable information

using anti-reflective plastic cover. It can be standing as a portrait or

landscape, freestanding with two legs or as a full length TOTEM sign.

As TOTEM is a part of SIGNET Sign System it is of course very flexible and

incredibly uncomplicated. Due to the readymade accessories, it is very easy

to build a TOTEM sign.

TOTEM is available in up to 6m lengths and can also be integrated with our

other systems - CLASSIC, SLIM and CONVEXA.

TOTEM

.

Sign Applications

portrait or landscape

indoor or outdoor

flat or curved

single or double sided

freestanding with two legs

directory sign

information and planning board

unlimited sign applications

49


50

1


TOTEM Sign

1.

2.

3.

4.

Cut the T-95 profiles in preferred lengths.

Slide in the TS-95 support bars (top, middle and bottom) A, and screw with an Allen key.

Attach the TF-95 feet to the bottom of the T-95 profiles with seven screws B.

Attach TI-95 stabilizing plates on the support bars, middle and bottom C.

5.

6.

.

Install the insert D. Inserts can be made of aluminium, PVC, Plexiglas, or any other suitable

material.

Close the sign with a TT-95 Top plate or TE-95 end caps. Attach with screws E.

To create a “TOTEM with legs”, cover the freestanding part of profile T-95 with TC-95

caps for a clean finished appearance.

For indoor use, the TOTEM sign can be assembled with a light fixture inside the sign,

and using a base plate is preferable.

TOTEM can be curved or flat, and combined with inserts of bent aluminium plate, or

with a plastic cover for exchangeable information.

TOTEM signs can be mounted to the ground in various ways depending on the size of

the sign and the type of the ground. You can assemble the TOTEM on an already existing

foundation or pour a foundation in a traditional way on site.

1.

Curved double sided TOTEM Company Sign (1200x3000mm) using T-95 profile and TF-95 feet which

are screwed to a concrete block.

51


1

1.

Flat double sided TOTEM Directory Sign (4000x3000mm) using

profiles T-95 and TC-95 with a directory map in the middle and

exchangeable inserts in anodized bent aluminium.

2

2. Rear view of pic. 1.

3

3.

4.

Flat TOTEM Wayfinding Sign (1100x800mm) using

profiles T-95 and TC-95 with freestanding legs.

Flat TOTEM Directory Sign (1690x2800mm) using profile

T-95 and feet TF-95, integrating CLASSIC slide-down

system (700x1100mm) using side profile S-25 and profile

25-4 for exchangeable information.

52


4

53


1

2

1.

Flat freestanding Directory Sign (1000x2500mm).

2.

Flat double sided TOTEM Directory Sign

(900x2500mm) using profile T-95 and

TF-95 feet screwed to a concrete block.

3.

Flat double sided TOTEM Directory Sign

(1300x2500mm) using profile T-95 with

exchangeable inserts in bent anodized

aluminium and TF-95 feet.

4.

Flat double sided TOTEM Wayfinding Sign

(1150x500mm) using profiles T-95 and

TC-95 as caps.

5.

Flat double sided TOTEM Wayfinding Sign

(850x1500mm) using profile T-95 and

TF-95 feet.

54


3

4

5

55


1

2

1.

Flat TOTEM Information Signs in sections

(6000x4000mm) using profiles T-95 and

TC-95 as caps.

2.

Curved double sided TOTEM Directory

Sign (1200x2700mm) using profile T-95

with exchangeable aluminium inserts and

TF-95 feet.

56


1

1.

2.

TOTEM double sided Company Sign

(1200x2500mm) using profile T-95 with

curved front mounted on a base plate and

TT-95 top plate.

Indoor TOTEM double sided Company Sign

(900x2000mm) using profile T-95 with curved

front and exchangeable aluminium inserts,

mounted on a base plate, and TT-95 top plate.

2

57


1

2

1.

2.

3.

4.

Flat double sided TOTEM Directory Sign

(1635x2350mm) with LED light bar using

profile T-95 and lamellae in bent anodized

aluminium.

Flat double sided TOTEM Company Sign

(1185x2650mm) using profile T-95 and

lamellae in bent anodized aluminium.

Flat double sided TOTEM Company Sign

(1800x1600mm) using profile T-95 with

bent aluminium sheet.

Flat TOTEM Company Sign (1015x2000mm)

using profile T-95 with exchangeable inserts

in bent anodized aluminium and TF-95 feet.

58


3

4

59


SIGNET demo display

SIGNET Sign System presents the attractive SLIM display.

With SLIM, SIGNET Sign System has developed an

ultrathin system at only 5,5mm. SLIM is perfectly

suitable for all exchangeable visual communication

and for tactile/braille. It can also be integrated with

our other systems CLASSIC, CONVEXA and TOTEM.

Description of the display:

1.

2.

3.

4.

5.

6.

7.

SLIM Pictogram (105x105mm) using SL-6 and L-30

SLIM Open/Closed Sign (180x50mm) using 50-1 and L-30

SLIM Name plate (150x50mm) using 50-1 and L-30

SLIM Name plate (170x60mm) using 60-1 and L-30

SLIM Name plate (170x80mm) using 80-1 and L-30

SLIM A4 (210x297mm) using SL-4 and L-30

SLIM A5 (148x210mm) using SL-5 and L-30

All the signs are attached to the display with

magnets and are very easily detachable for

demonstration. The display (450x600mm)

is made of white Alucobond.

60


SIGNET demo suitcase

SIGNET Sign System has updated its demo suitcase and

added the SLIM and FLEXI lines.

The new suitcase can be hung on the wall presenting

a selection of our product lines CLASSIC, SLIM,

MAGNETIC, FLEXI, CONVEXA, ELEGANCE and SIGNET

hanging accessories. It displays a concrete overview of

our products, and of the flexibility of SIGNET Sign System.

Description of the suitcase:

1.

ELEGANCE - sample in mini format

2.

3.

4.

Magnetic click system (155x110mm) profiles SM-35,

50-1 and 30-1

CLASSIC double sided flag sign (150x40mm) profiles

FL-40, 20-2 and U-14

FLEXI hanging sign (215x105mm) profiles H-20 and

HC-20 with hanging accessories

5.

6.

7.

8.

9.

Desk sign (150x50mm) profile D-50

CONVEXA Name plate (150x53mm) profile C8

SLIM Pictogram (105x105mm) profiles SL-6 and L-30

CONVEXA Pictogram (110x110mm) profile C6

SLIM Name plate (170x60mm) profiles 60-1 and L-30

10.

11.

CLASSIC slide-down (215x55mm) profiles

S-12, 25-1, 20-1 and L-30

CLASSIC slide-down (215x130mm) profiles

S-7, 50-1, 25-1, 20-1 and L-30

61


PROFILE Specification

CLASSIC/SLIM/MAGNETIC

Designation

Size of Profile/mm Designation Size of Profile/mm

For more information, see CLASSIC page 4-13, and SLIM page 14-23.

13-1 to SL-4 Double sided profiles

Where one side has one or several rails for exchangeable inserts and the other side is flat for text. The two first

numbers (13-1 to 90-1) represent the width of the insert in mm and the last number indicates the number of rails.

Used in CLASSIC slide-down or magnetic click system and as SLIM signs (40-1 to SL-4).

S-7, S-12, S-25 and SM-35 Side profiles

Used as side profiles in CLASSIC slide-down system, as a frame, as magnetic click system (SM-35) or as an

EASY SLIDE document holder (S-25).

M-12, M-25 and M-40 Middle profiles/dividers

Used to divide two or several text lines into columns in CLASSIC slide-down (M-12, M-25) or SLIM signs (M-40).

CH-30 and CH-35 Half double sided profiles

Used to build CLASSIC/SLIM profiles in any size required.

L-30 Stopper/End caps

Stopper for CLASSIC signs and end caps for SLIM signs.

FL-40 Flag profile for double sided profiles.

U-14 End cap for flag signs.

D-48 and D-50 Desk profiles for desk signs.

D-48 integrates with CLASSIC, CONVEXA or just alone while D-50 is used for insert 50mm.

62


CONVEXA

Designation

Size of

Insert

mm

Visible

Surface

mm

Size of

Profile

mm

PROFILE Specification

For more information, see CONVEXA page 30-41

FLEXI

ELEGANCE

Designation

Size of Profile/mm

Designation

Size of Profile/mm

For more information, see FLEXI page 24-29

ELEGANCE end caps are available in seven

different sizes in wood and aluminium.

TOTEM

Designation

Designation

In 2,9 and 6m length

For more information, see TOTEM page 48-57 For more information, see ELEGANCE page 42-47

63


Authorized distributor:

SIGNET Sign System

Stålverksgatan 9

S-417 07 Göteborg, Sweden

Tel. +46 31 51 36 00

Fax +46 31 22 59 49

signet@signet.se

www.signet.se

More magazines by this user
Similar magazines