Series GPC

More documents

Recommendations

Info

4 Piston rod cylinder ► Guide cylinders Series GPC Socket, M8x1, Series CN2 ► Socket, M8x1, 3-pin 75 Socket, M8x1, Series CN2 ► angled ► Socket, M8x1, 3-pin 76 Stroke setting accessories Kit for stroke length adjustment 78 Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2015-11-12, ©AVENTICS S.à r.l., subject to change
Piston rod cylinder ► Guide cylinders Guide cylinders, Series GPC-BV ► Ø 10 - 100 mm ► double-acting ► Plain bearing ► cushioning: elastic ► with magnetic piston 5 Ambient temperature min./max. -10°C / +70°C Medium Compressed air Max. particle size 50 µm Oil content of compressed air 0 mg/m³ - 5 mg/m³ Pressure for determining piston forces 6,3 bar 00106713 Materials: Housing Seal Front plate Guide rod Bearing Piston rod Aluminum, anodized Polyurethane Steel galvanized Stainless steel Sintered bronze Stainless steel a11 Technical Remarks ■ The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C. ■ The oil content of compressed air must remain constant during the life cycle. ■ Use only the approved oils from AVENTICS, see chapter „Technical information“. ■ Note: Only the Ø10 variants fits to sensor series ST4. The sensor series ST6 and SN3 can be used for all other Ø variants. Piston Ø [mm] 10 12 16 20 25 Port M5 M5 M5 M5 G 1/8 Working pressure min./max. [bar] 2 / 8 2 / 8 2 / 8 2 / 8 1.5 / 8 Retracting piston force [N] 42 53 95 148 260 Extracting piston force [N] 49 71 127 198 309 Speed max. [m/s] 0.5 0.5 0.5 0.5 0.8 Impact energy [J] 0.04 0.1 0.11 0.15 0.35 Piston Ø [mm] 32 40 50 63 80 Port G 1/8 G 1/8 G 1/4 G 1/4 G 1/4 Working pressure min./max. [bar] 1.3 / 8 1 / 8 1 / 8 1 / 8 1 / 8 Retracting piston force [N] 435 720 1110 1837 2969 Extracting piston force [N] 507 792 1237 1964 3167 Speed max. [m/s] 0.6 0.6 0.6 0.6 0.4 Impact energy [J] 0.4 0.52 0.64 0.75 0.75 Piston Ø [mm] 100 Port G 3/8 Working pressure min./max. [bar] 1 / 8 Retracting piston force [N] 4639 Extracting piston force [N] 4948 Speed max. [m/s] 0.4 Impact energy [J] 1 Part numbers marked in bold are available from the central warehouse in Germany, see the shopping basket for more detailed information Pneumatics catalog, online PDF, as of 2015-11-12, ©AVENTICS S.à r.l., subject to change
Page 1 and 2: Piston rod cylinder ► Guide cylin
Page 3: 3 Piston rod cylinder ► Guide cyl
Page 21 and 22: L3 Piston rod cylinder ► Guide cy
Page 55 and 56:
Piston rod cylinder ► Guide cylin
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
1 4 3 1 4 3 BN BK BU BN BK BU RL RL
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79:
AVENTICS GmbH Ulmer Straße 4 30880
show all

Series GPC

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?