Cabinetmaker GettingStarted

2. Click on the Load Toolpath As Template button in
the Toolpath Operations area to display the Load
Toolpath Template dialog box.
3. Click on the Look In list box and then click to select the
directory in which the toolpath template file you want to use
is located.
The default location for ArtCAM Toolpath Template files is
C:\Documents and Settings\All Users\Documents\ArtCAM
Files\Toolpath Templates.
4. When you have found the toolpath template file, click on
the file name listed in the main window of the Load
Toolpath Template dialog box.
The name of each of the four sample toolpath template files
installed with ArtCAM Cabinetmaker denote the Units of
Measurement and the Material Z Zero position used when
creating them. You should select a toolpath template file
equivalent to your current job settings. For example, if you
are using imperial dimensions and your cutting tool is
positioned relative to the material surface, you might select
the DefaultInchLayers_Z_Top.tpl toolpath template file.
You are only able to select toolpath template files (*.tpl).
You can confirm this by clicking on the Files of Type list
box.
5. Click on the Open button to load the toolpaths within the
template file into ArtCAM Insignia. The toolpaths are listed
on the Toolpaths Home page.
30 • Reference Material ArtCAM Cabinetmaker