Specification Book2013

3rd STEP: Planning the screed recess:
Observe the required dimensions for wall mounting
a) Width:
Width of the shower surface (= nominal width)
see also packaging
mm
+ tolerance allowance: 20 mm
A = recess width =
mm
b) Length:
Length of shower surface (= nominal length)
see also packaging
mm
+ panelling thickness mm
+ tile mm
+ tile adhesive mm
+ tolerance allowance 10 mm
B = recess length =
mm
SHOWERING
AVANTGARDE
4th STEP: Planning the tile adaptation:
Observe the required dimensions for fi tting the tile.
a) Tile cut-out wall: 324 mm x 41 mm
Recommendation: Centre the tile above the panel.
b) Tile strip for tileable design panel: 310 mm x 36 mm x tile thickness (max. 13 mm)
Further accessories can be found on page 194 onwards. Available colours see page 241. = separate accessory. For more information on the 12-digit Kaldewei Article Number see page 242.
169