WAGO-Product Short Form

More documents

Recommendations

Info

1 36 TOPJOB ® @ Function Terminal Blocks 2002, 2004 and 2006 Series Fuse disconnect terminal blocks Disconnect/test terminal blocks Diode and LED terminal blocks Pluggable fuse module with blown fuse indication on a 3-conductor carrier terminal block. Movable knife disconnects clearly indicate the circuit state. Designing custom circuits: - via diode terminal blocks (e.g., collective fault signals) - via LED terminal blocks (e.g., monitoring units). Fuse replacement 1 Commoning and marking Commoning Before replacing the fuse, pivot the fuse holder into the locked open position. Fuse replacement 2 Dual jumper slots, in the same position as the 2002 Series terminal blocks. Commoning options in front of or behind the knife disconnect, depending on the power supply direction. One center and two side marker slots for WMB markers or marking strips. Additional marking Custom circuit design via push-in type jumper bars. Example shows “lamp test circuit.” Application One end of the fuse is automatically ejected from the holder when opening the cover. Additional marking option via pivoting marker carriers. Lamp test circuit Mini-automotive blade-style fuses Double-deck disconnect terminal blocks Triple-deck diode terminal blocks Fuse terminal block for mini-automotive blade-style fuses Two disconnect terminal blocks with different potential are housed on two levels in a double-deck disconnect terminal block. CAGE CLAMP ® S clamps the following copper conductors: Space saving arrangement. solid Strip length, see packaging or instructions. stranded fine-stranded tip bonded with ferrule with pin terminal
TOPJOB ® @ Disconnect/Test and Fuse Terminal Blocks, 2-Conductor 2002 Series 0.25 - 2.5 (4) mm 2 1 AWG 22 - 12 400 V/6 kV/3 I N 16 A Terminal block width 5.2 mm / 0.205 in L 10 - 12 mm / 0.43 in 1 Conductor sizes: 0.25 – 4 mm 2 “s + f-st”; Push-in conductor sizes: 0.75 – 4 mm 2 “s” and 0.75 – 2.5 mm 2 “insulated ferrule, 12 mm” 0.25 - 2.5 (4) mm 2 1 AWG 22 - 12 400 V/6 kV/3 I N 10 A 2 Terminal block width 5.2 mm / 0.205 in L 10 - 12 mm / 0.43 in 3 Approvals 3 Approvals 3 Approvals (__ 33 mm/1.29 in _) 0.25 - 2.5 (4) mm 2 1 AWG 22 - 12 250 V/6 kV/3 I N 6.3 A 2 Terminal block width 6.2 mm / 0.244 in L 10 - 12 mm / 0.43 in 12 S (________ 57,6 mm/ 2.26 in ________) 1 37 1 Color Item No. Pack. Unit 2-conductor disconnect/test terminal block gray 2002-1671 50 blue 2002-1674 50 orange 2002-1672 50 2-conductor through terminal block, same profile gray 2002-1601 50 blue 2002-1604 50 orange 2002-1602 50 Item-Specific Accessories End and intermediate plate, 1 mm thick orange 2002-1692 100 (4x25) gray 2002-1691 100 (4x25) Color Item No. Pack. Unit Color Item No. Pack. Unit 2-conductor fuse terminal block, for blade-style fuses acc. to DIN 72581-3f, ISO 8820-3 gray 2002-1681 50 - Individual arrangement:10 A - Block arrangement: 5 A Protection against direct contact must be observed for 42 V and higher voltages! End and intermediate plate, 1 mm thick orange 2002-1692 100 (4x25) gray 2002-1691 100 (4x25) 2-conductor fuse terminal block with end plate, with blown fuse indication, for miniature metric fuses, gray 12 – 30 V ≃ 2002-1611/1000-541 50 30 – 65 V ≃ 2002-1611/1000-542 50 120 V ≃ 2002-1611/1000-867 50 230 V ≃ 2002-1611/1000-836 50 2-conductor fuse terminal block with end plate, without blown fuse indication, gray 2002-1611 50 2002 Series Accessories Appropriate marking systems: WMB/Marking Strips/WMB Inline/Mini-WSB Push-in type jumper bar, insulated, I N 25 A, light gray 2-way 2002-402 200 (8x25) 3-way 2002-403 200 (8x25) 4-way 2002-404 200 (8x25) 5-way 2002-405 100 (4x25) : : 10-way 2002-410 100 (4x25) For step-down jumpers, see page 31. Staggered jumper, insulated, I N 25 A, light gray 2-way 2002-472 100 (4x25) 3-way 2002-473 100 (4x25) 4-way 2002-474 100 (4x25) 5-way 2002-475 50 (2x25) : : 12-way 2002-482 50 (2x25) Insulation stop, 5 pcs/strip 200 strips light gray 2002-171 0.25–0.5 mm 2 dark gray 2002-172 0.75–1 mm 2 Test plug adapter, for test plug 4 mm Ø 2009-174 100 (4x25) Testing tap, for max. 2.5 mm 2 /AWG 14 2009-182 100 (4x25) Test plug, with 500 mm cable, 2 mm Ø red 210-136 50 (5x10) Insulated ferrules, extra long, for TOPJOB ® S terminal blocks, see page 195 Push-in type jumper bar, insulated, I N 25 A, light gray 1 - 3 2002-433 200 (8x25) 1 - 4 2002-434 200 (8x25) 1 - 5 2002-435 100 (4x25) : : 1 - 10 2002-440 100 (4x25) Disconnect plug for fuse terminal blocks, suitable when using the fuse terminal block as a disconnect terminal block orange 2002-401 100 (4x25) TOPJOB ® S connector, modular, for jumper contact slot gray 2002-511 100 (4x25) Spacer module gray 2002-549 100 (4x25) Protective warning marker, with high-voltage symbol, for 5 terminal blocks yellow 2002-115 100 (4x25) Operating tool with partially insulated shaft, type 2, (3.5 x 0.5) mm blade 210-720 1 Approval for Ex i applications (pending) 4 Approval for Ex e II applications (pending) 2 Nominal voltage and current are given by the fuse or blown fuse indicator! 3 Approvals are available online at: www.wago.com. For technical explanations and abbreviations, see technical section. End plate for fuse terminal blocks, 2 mm thick Miniature metric fuses 5 x 20 Series Item No. 2002-1611 2002-1811 2002-1811/....-.... 2002-1611/....-.... orange 2002-992 100 (4x25) gray 2002-991 100 (4x25) Fuse terminal blocks with a width of 6.2 mm can be assembled adjacently. If there is no adjacent fuse terminal block at the end of the assembly, an end plate must be used. When selecting miniature metric fuses, the maximum power loss listed below shall not be exceeded. The power loss is determined according to IEC or EN 60947-7-3/VDE 0611-6 at 23°C. The temperature rise of the terminal blocks must be checked according to their application and mounting. Higher ambient temperatures place additional strain on fuse cartridges. Therefore, in such applications, the rated current must be reduced if necessary. More details available from the manufacturer. Overload and short circuit protection Individual Group arrangement arrangement <strong>Short</strong> circuit protection only Individual Group arrangement arrangement Fuse disconnect terminal blocks 1.6 W 1.6 W 2.5 W 2.5 W 1.6 W 1.6 W 2.5 W 2.5 W
Page 1 and 2: Product Short Form PSF 4.1
Page 3 and 4: WAGO Full Line Catalogs Volume 1, R
Page 5 and 6: CONTENTS PSF 4.1 1 3 Rail-Mounted T
Page 7 and 8: Recognized and Approved Worldwide 0
Page 9 and 10: WAGO Worldwide 0 7 WAGO was founded
Page 11 and 12: Europe > > Asia > > 0 9
Page 13 and 14: 0 11 Rail-Mounted Terminal Block Sy
Page 15 and 16: 0 13 JUMPFLEX ® - Transducers and
Page 17 and 18: 0 15 INDUSTRY Plant automation and
Page 19 and 20: 0 17 Rail-mounted terminal blocks w
Page 21 and 22: 0 19 One Conductor per Clamping Uni
Page 23 and 24: 0 21 Time-Saving CAGE CLAMP ® tech
Page 25 and 26: 0 23 High-Current Carrying Capacity
Page 27 and 28: TOPJOB ® @ Rail-Mounted Terminal B
Page 29 and 30: TOPJOB ® @ Through/Ground Conducto
Page 35 and 36: TOPJOB ® @ Double-Deck Terminal Bl
Page 37: TOPJOB ® @ Triple- and Quadruple-D
Page 41 and 42: TOPJOB ® @ Carrier Terminal Blocks
Page 43 and 44: TOPJOB ® @ Double-Deck Disconnect
Page 45 and 46: TOPJOB ® @ Double- and Triple-Deck
Page 47 and 48: X-COM ® @ SYSTEM Carrier Terminal
Page 49 and 50: Mounting Types S 1 47 1 18 18 2 x P
Page 51 and 52: 4-Conductor, Chassis-Mount Terminal
Page 53 and 54: Through/Ground Conductor/Shield and
Page 55 and 56: Through/Ground and Ex Terminal Bloc
Page 57 and 58: Through/Ground Conductor and Ex Ter
Page 59 and 60: Through/Ground Conductor and Ex Ter
Page 61 and 62: High-Current, Through/Ground Conduc
Page 63 and 64: Double-Deck Terminal Blocks 4 mm 2
Page 65 and 66: Quadruple-Deck, Rail-Mounted Termin
Page 67 and 68: . . . Description and Handling Disc
Page 69 and 70: Disconnect Terminal Blocks 280 / 28
Page 71 and 72: Disconnect/test terminal blocks 282
Page 73 and 74: . . . Description and Handling Mark
Page 75 and 76: Actuator Terminal Blocks 280 Series
Page 77 and 78: . . . Description and Handling Test
Page 79 and 80: Technical data - carrier terminal b
Page 81 and 82: X-COM ® -SYSTEM Female Plugs, Stra
Page 83 and 84: Through and Ground Conductor Termin
Page 85 and 86: Fuse Terminal Blocks, Disconnect Te
Page 87 and 88: Modular Terminal Blocks and Termina
Page 89 and 90:
Modular Terminal Blocks and Termina
Page 91 and 92:
MICRO PUSH WIRE ® Connectors for J
Page 93 and 94:
PUSH WIRE ® Connectors for Junctio
Page 95 and 96:
Compact Splicing Connectors for Fin
Page 97 and 98:
> _) ___) MULTI CONNECTION SYSTEM M
Page 99 and 100:
_) ___) ______> > > _) ___) MULTI C
Page 101 and 102:
MULTI CONNECTION SYSTEM MINI HD - 1
Page 103 and 104:
> > > > < MULTI CONNECTION SYSTEM M
Page 105 and 106:
(_ MULTI CONNECTION SYSTEM MIDI - 1
Page 107 and 108:
MULTI CONNECTION SYSTEM MAXI - 100%
Page 109 and 110:
MULTI CONNECTION SYSTEM MIDI Classi
Page 111 and 112:
MULTI CONNECTION SYSTEM MIDI Classi
Page 113 and 114:
> > < > > > < < MULTI CONNECTION
Page 115 and 116:
MULTI CONNECTION SYSTEM MINI and MI
Page 117 and 118:
Terminal Strips with Locking Slides
Page 119 and 120:
PCB Terminal Strips, Description an
Page 121 and 122:
PCB Modular Terminal Blocks and Ter
Page 123 and 124:
Page 125 and 126:
Triple- and Quadruple-Deck PCB Term
Page 127 and 128:
Page 129 and 130:
PCB Terminal Strips with Operating
Page 131 and 132:
SMD Terminal Blocks with Push-Butto
Page 133 and 134:
2-Conductor PCB Terminal Strips 1.5
Page 135 and 136:
Page 137 and 138:
PCB 2-Conductor Modular Terminal Mo
Page 139 and 140:
> PCB Terminal Strips with Push-But
Page 141 and 142:
4-Conductor Modular PCB Connectors,
Page 143 and 144:
Progr. Fieldbus Controller Designed
Page 145 and 146:
3 143 Color-coded for simplicity Ma
Page 147 and 148:
Industrial PC 758 Series 3 145 Indu
Page 149 and 150:
Analog Inputs and Analog Outputs 75
Page 151 and 152:
PROFIsafe Modules and Ex i Intrinsi
Page 153 and 154:
Fieldbus Couplers, Programmable Fie
Page 155 and 156:
PERSPECTO ® Monitors and Panels 76
Page 157 and 158:
ETHERNET Industrial Switches 852 Se
Page 159 and 160:
EPSITRON ® Primary Switch Mode Pow
Page 161 and 162:
JUMPFLEX ® A Complete Product Line
Page 163 and 164:
RL RL JUMPFLEX ® Relays, Optocoupl
Page 165 and 166:
. . . Description and Handling 859
Page 167 and 168:
Rail-mounted terminal blocks with o
Page 169 and 170:
Rail-Mounted Relay Modules, 287 and
Page 171 and 172:
4 169 Optocouplers Temperature tran
Page 173 and 174:
Empty Component Plug Housings for B
Page 175 and 176:
5 173 WINSTA ® KNX For the stan
Page 177 and 178:
5 175 Shipbuilding Lighting connect
Page 179 and 180:
WINSTA ® - The Connection System A
Page 181 and 182:
smartDESIGNER and productLOCATOR
Page 183 and 184:
smart SCRIPT 6 181 smartSCRIPT •
Page 185 and 186:
Marking Accessories WAGO Multi mark
Page 187 and 188:
Group Marker Carriers End Stops 6 1
Page 189 and 190:
Conductor Marking for Thread-On Mou
Page 191 and 192:
Carrier Rails Angled Support Bracke
Page 193 and 194:
Operating Tools Test and Measuremen
Page 195 and 196:
Cable Cutter and TESTBOY, 206 Serie
Page 197 and 198:
Crimping Tool, 206 Series Ferrules,
Page 199 and 200:
Page Q Page T Page MULTI CONNECTION
Page 201 and 202:
7 199 Abbreviation for online searc
Page 203 and 204:
4: Entry Options a) Item Number
Page 205 and 206:
Current-Carrying Capacity Curves fo
Page 207 and 208:
Item Number Index Item No. Page Ite
Page 209 and 210:
7 207 Item No. Page Item No. Page I
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Lithuania INSTABALT LIT UAB Savanor
Page 219:
51262353 · 0888-0070/1541-3601 ·
show all

WAGO-Product Short Form

Create successful ePaper yourself

Delete template?

Save as template?