Engineering New Frontiers Summer Camp - the School of ...

high-accuracy and full-field 3D imaging,”
Army Research Office, October 2010–
September 2011, $84,476.
■ Wang, Z., “DURIP: Whole-field experimental
nanomechanics characterization of nanomaterials
and nanostructures,” Air Force Office
of Scientific Research, June 2009–June
2010, $101,950.
■ Wilson, Jr., O.C., “Bone Inspiration in Research
and Education,” National Science
Foundation, March 1, 2007–Feb. 28, 2012,
$450,000.
Presentations and
Publications
■ Abot, J.L., Song, Y., Medikonda, S., Schulz,
M.J., and Rooy, N., “A distributed piezoresistive
strain gauge for polymeric materials,”
25th American Society for Composites
Conference, Dayton, Ohio, 2010.
■ Abot, J.L., Song, Y., Schulz, M.J., Medikonda,
S., Sri Vatsavaya, M., Kier, Z., Jayasinghe, C.,
Shanov, V.N., and Rooy, N., “Self-sensing
composite materials: delamination detection,”
25th American Society for Composites
Conference, Dayton, Ohio, 2010.
■ Abot, J.L. and Song, Y., “On the delamination
detection of laminated composite materials
using integrated carbon nanotube sensors,”
ASME Applied Mechanics and Materials
Conference, Chicago, Il. 2011.
■ Abot, J.L. and Song, Y., “On the development
of an integrated strain sensor for composite
materials,” ASME Applied Mechanics and
Materials Conference, Chicago, Il. 2011.
■ Abot, J.L., Song, Y., Medikonda, S., Schulz,
M.J., and Rooy, N., “A distributed piezoresistive
strain gauge for polymeric materials,”
25th American Society for Composites
Conference, Dayton, Ohio, 2010.
■ Abot, J.L., Schulz, M.J., Shanov, V.N., Song,
Y., and Sri Vatsavaya, S., “Mode II delamination
detection in composite materials with carbon
nanotube sensor threads,” 16th U.S. National
Congress on Theoretical and Applied
Mechanics, University Park, Pa., 2010.
■ Abot, J.L., Raghavan, V., Bardin, G., Govindaraju,
N., and Song, Y., “On the thermal
conductivity anisotropy of a carbon nanotube
array laminated composite material,” 16th U.S.
National Congress on Theoretical and Applied
Mechanics, University Park, Pa., 2010.
■ Abot, J.L., Raghavan, V., Li, G., and Thomas,
E.L., “Effect of interface, height and density
of tall carbon nanotube arrays on their thermal
conductivity: an experimental study,” J.
Nanosci. Nanotechno., 11 (1): 1-10, 2011.
■ Abot, J.L., Bardin, G., Raghavan, V., Govindaraju,
N., Spriegel, C., and Song, Y., “Thermal
conductivity of carbon nanotube array
laminated composite materials,” J. Compos.
Mater., 45 (3): 321-340, 2011.
■ Song, Y. and Abot, J.L., “On the mechanical
response of carbon nanotube array laminated
composite materials,” J. Reinf. Plast.
Comp., 29 (22): 3401-3410, 2010.
■ Abot, J.L., Schulz, M.J., Song, Y., Medikonda,
S., and Rooy, N., “Novel distributed strain
sensing in polymeric materials,” Smart
Mater. Struct., 19 (8): 085007, 2010.
■ Jayasinghe, C., Li, W., Abot, J.L., Song, Y.,
Shanov, V.N., Fialkova, S., Yarmolenko, S.,
Sundaramurthy, S., Chen, Y., Cho, W.,
Chakrabarti, S., Li, G., Yun, Y., and Schulz,
M.J., “Nanotube responsive materials,”
MRS Bull., 35 (9): 682-692, 2010.
■ Abot, J.L., Song, Y., Sri Vatsavaya, M.,
Medikonda, S., Kier, Z., Jayasinghe, C., Rooy,
N., Shanov, V.N., and Schulz, M.J., “Delamination
detection with carbon nanotube thread
in self-sensing composite materials,” Compos.
Sci. Technol., 70 (7): 1113-1119, 2010.
■ Evora, M.C., Klosterman, D., Lafdi, K., Li, L.,
and Abot, J.L., “Functionalization of carbon
nanofibers through electron beam irradiation,”
Carbon, 48 (7): 2037-2046, 2010.
■ Kulkarni, M., Carnahan, D., Kulkarni, K.,
Qian, D., and Abot, J.L., “Elastic response
of a carbon nanotube reinforced fiber polymeric
composite: a numerical and experimental
study,” Compos. Part B-Eng., 41 (5):
414-421, 2010.
■ Brown, J.S., “What does faith have to do
with the intellectual life?”, Faculty Roundtable,
President Garvey’s Inaugural Year Activities,
Jan. 2011.
■ Brown, J.S., “The Cardinal Virtue of Prudence,”
The Tower, March 2011.
■ Cavallini, A., Brown, J.S., and Zilio, C.,
“Sustainability with prospective refrigerants,”
Sustainable Refrigeration and Heat
Pump Technology, Stockholm, Sweden,
June 2010.
■ Brown, J.S., Zilio, C., and Cavallini, A.,
“Critical review of the latest thermodynamic
and transport property data and models,
and equations of state for R-1234yf,”
cuaengineer
International Refrigeration Conference, West
Lafayette, Ind., July 2010.
■ Brown, J.S., Zilio, C., and Cavallini, A.,
“A compact automobile air conditioning system
operating with R-134a and R-1234yf,”
International Refrigeration Conference, West
Lafayette, Ind., July 2010.
■ Brown, J.S., “Refrigerants and refrigeration:
Energy and environmental impacts,” Engineering
Colloquium, NASA Goddard Flight
Center, Greenbelt, Md., November 2010.
■ Brown, J.S., “Low GWP refrigerant options
for unitary equipment,” ASHRAE Meeting,
Las Vegas, January 2011.
■ Brown, J.S., “Alternative Cooling Technologies,”
IAPG Mechanical Working Group
Meeting, Washington, D.C., May 2011.
■ Cavallini, A., Brown, J.S., and Zilio, C.,
“Sustainability with prospective refrigerants,”
Proceedings of the Sustainable Refrigeration
and Heat Pump Technology Conference,
Stockholm, Sweden, June 2010.
■ Brown, J.S., Zilio, C., and Cavallini, A., “Critical
review of the latest thermodynamic and
transport property data and models, and
equations of state for R-1234yf,” Proceedings
of the 13th International Refrigeration
and Air Conditioning Conference, West
Lafayette, Ind., July 2010.
■ Brown, J.S., Zilio, C., and Cavallini, A., “A
compact automobile air conditioning system
operating with R-134a and R-1234yf,” Proceedings
of the 13th International Refrigeration
and Air Conditioning Conference, West
Lafayette, Ind., July 2010.
■ Fedele, L., Bobbo, S., Groppo, F., Brown, J.S.,
and Zilio, C., “Saturated pressure measurements
of 2,3,3,3-tetrafluoroprop-1-ene
(R1234yf) for Reduced Temperatures Ranging
from 0.67 to 0.93,” Journal Chemical Engineering
Data, dx.doi.org/10.1021/je2000952.
■ Brown, J.S., “Refrigerants: Energy and
environmental impacts,” HVAC&R Research,
Vol. 17, No. 2, pp. 131-132.
■ Walker, L., Chang, L-C., Sharma. N., Cohen,
L., Verma, R., and Pierpaoli, C., “Effects of
Physiological Noise in Population Analysis
of Diffusion Tensor MRI Data,” NeuroImage,
15;54 (2):1168-77, 2011.
■ Chang, L-C., Walker, L., Behseta, B., and
Pierpaoli, C., “Informed RESTORE for Removal
of Physiological Noise Artifacts in
Low Redundancy DTI Data,” in Proc. the
19th Annual International Society for Mag-
fall2011 | 19