(2) AMPLIFICADOR 2R COMPLETO LYNX-v3-0-QAG
LYNX-v3-0-QAG
LYNX-v3-0-QAG
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
9. Basic wiring<br />
Here shown with one common Ground point (Start Ground)<br />
Red:<br />
Black:<br />
Blue<br />
+DC<br />
Ground<br />
-DC<br />
For those in countries using Safety Ground, I think a 10R/5W resistor from Common Ground point to Safety Ground<br />
should do it, however as we do not use this in Denmark I’m not sure………<br />
You can read more on Elliott Sound Products: http://sound.westhost.com/psu-wiring.htm<br />
10. Power Supply suggestion<br />
Recommended Specification<br />
Rail Voltages:<br />
Transformer rating:<br />
Capacitor Bank:<br />
+/-30 to 60 Volt DC with common ground<br />
300 to 500 Watts per channel<br />
min. 2x15.000uF with 2x100nF parallel<br />
Below is shown an example of a simple Power Supply for the <strong>LYNX</strong> Power Amp<br />
AC<br />
Main<br />
To<br />
Amplifier<br />
Read more on Elliott Sound Products: http://sound.westhost.com/power-supplies.htm<br />
Thanks to Rod Elliott for his permission to link to his very informative site: http://sound.westhost.com<br />
<strong>LYNX</strong> <strong>v3</strong>.0 Power Amplifier by Jan Dupont, Audio Circuit Denmark<br />
www.audio-circuit.dk<br />
Page 11
Change language